[xubuntu-users] Xubuntu 11.10 booting problem
keith at keithg4jvx.force9.co.uk
Wed Feb 22 16:50:34 UTC 2012
On 21/02/2012 4:30 PM, Joshua O'Leary wrote:
> On 18/02/12 19:54, Keith Powell wrote:
>> I am running 11.10 inside Windows7, using WUBI.
>> When I boot Xubuntu, it starts to boot and then stops with the message:
>> Input Signal Out of Range. Changing to 1600x900 @ 60Hz.
>> This is the resolution of my monitor. Booting stops for about 30
>> seconds, then completes. When running, the display shows that it is,
>> indeed, the correct resolution.
>> I don't get this problem when running it as a live CD.
>> It's not vital, but is just a nuisence and I don't want it to occur
>> when I do a proper install of Xubuntu in a week or so time.
>> Can anyone help, please, or would it be better to wait a couple of
>> months, continuing running it in Windows, until 12.04 comes out and
>> see if that is OK.
>> I've not seen this problem raised before on the list, and it didn't
>> happen when I tried Ubuntu or Mint.
>> Many thanks.
> What graphics card/chipset do you have (give the output of lspci if you
> are not sure). You could try creating an xorg.conf file
> (/etc/X11/xorg.conf), and specifying graphics settings there manually.
> You can find more information on this in the manual page (man xorg.conf).
> Section "ServerLayout"
> Identifier "Layout0"
> Screen 0 "Screen0" 0 0
> Section "Module"
> Load "glx"
> Section "ServerFlags"
> Option "Xinerama" "0"
> Section "Monitor"
> Identifier "Configured Monitor"
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Unknown"
> ModelName "CRT-1"
> HorizSync 28.0 - 55.0
> VertRefresh 43.0 - 72.0
> Section "Device"
> Identifier "Device0"
> Driver "driver goes here"
> Section "Screen"
> Identifier "Default Screen"
> Device "Configured Video Device"
> Monitor "Configured Monitor"
> DefaultDepth 24
> SubSection "Display"
> Depth 24
> Modes "1920x1080" "1280x720" "1024x768" "720x480" "800x600" "640x480"
> This is of course an example, and a configuration file for your graphics
> card is probably very different. Hope this may be of some help.
Thank you for your reply and instructions, which I tried to follow as
best as I could.
Unfortunately, things were worse.
Up came the 'Input Signal Out of Range' message for 30 seconds, but as
soon as it disappeared, the computer shut down. So I was obviously doing
I have reinstalled Xubuntu using WUBI, but without Xorg.conf. When I get
a chance, I'll have another go with the modification.
More information about the xubuntu-users