Mar 16 21:00:05 localhost kernel: [32917.573935] usblp0: removed

[Chris]

On Tue, 2015-03-17 at 00:04 -0400, Rashkae wrote:
> On 15-03-16 11:11 PM, Chris wrote:
> > The 2nd line of this is:
> > Mar 16 21:00:05 localhost kernel: [32917.575353] usblp 2-6:1.0: usblp0:
> > USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17
> >
> > Have thousands of lines like this in my syslog since having to reboot
> > this morning due to a system lockup. Sure wish I know what it means or
> > better yet how to stop it.
> >
> > Chris
> >
> >
> 
> Your printer has a bad connection. (or your usb is broken, but let's try 
> the easy one first.)... disconnect both ends of your printer cable and 
> re-connect,  if the problem persists, try a new cable, or connect your 
> printer to a different usb port.
> 
> If you are using more than 10' of usb cable to connect the printer, try 
> a to relocated it and test with a short cable.  If that solves the 
> issue, you can use a powered usb hub along the length of your cabling to 
> extend the range you need.
> 
> 
Oddly enough this suddenly stopped by itself last night at 10:15pm and
hasn't happened since. I'll try the above though if it starts up again,
thanks.

Chris

-- 
Chris
KeyID 0xE372A7DA98E6705C
31.11°N 97.89°W (Elev. 1092 ft)
08:26:36 up 20:35, 1 user, load average: 0.17, 0.20, 0.22
Ubuntu 14.04.2 LTS, kernel 3.13.0-031300-generic