Xsane not working

[Scott Blair]

On 12/22/2014 01:17 PM, NoOp wrote:
> On 12/21/2014 06:50 AM, Scott Blair wrote:
>> On 12/21/2014 12:09 AM, NoOp wrote:
>>> On 12/20/2014 06:58 PM, Scott Blair wrote:
>>>> On 12/20/2014 05:22 PM, NoOp wrote:
>>>>> dmesg | tail
>>>> http://paste.ubuntu.com/9585507/
>>>>
>>> Thanks. kodakaio.conf looks stock - I was looking to see if it had been
>>> modified for a specific IP address.
>>>
>>> I don't see Bus 001 Device 011 (device `kodakaio:libusb:001:011') in
>>> your lsusb...
>>>
>>> Turn off the scanner/printer & turn back on, then C&P to pastebin the
>>> last 20 or so lines of:
>>>
>>> $ dmesg
>>> $ cat /var/log/syslog
>>>
>>> and
>>>
>>> $ scanimage --list-devices
>>> $ sudo lsusb
>>>
>>> Note: you should be seeing something similar to the following (replacing
>>> Epson with kodak of course):
>>>
>>> $ scanimage --list-devices
>>> device `epkowa:usb:002:009' is a Epson Stylus SX620FW/Stylus Office
>>> BX625FWD/TX620FWD/ME OFFICE 960FWD/WorkForce 630 Series flatbed scanner
>>>
>>> $ lsusb
>>> Bus 002 Device 009: ID 04b8:085d Seiko Epson Corp. PX-603F [ME OFFICE
>>> 960FWD Series/Stylus Office BX625FWD/TX620FWD Series]
>>>
>>>
>>>
>> dmesg:
> <snip>
>> [74514.945516] IPv6: wlan0: IPv6 duplicate address
>> 2601:3:3000:e17:226:82ff:fe3e:b46b detected!
>> [74516.162052] usb 1-3: new high-speed USB device number 14 using ehci-pci
>> [74516.308455] usb 1-3: New USB device found, idVendor=040a, idProduct=4043
>> [74516.308468] usb 1-3: New USB device strings: Mfr=5, Product=6,
>> SerialNumber=7
>> [74516.308475] usb 1-3: Product: KODAK ESP 3200 Series AiO
>> [74516.308481] usb 1-3: Manufacturer: Eastman Kodak Company
>> [74516.308486] usb 1-3: SerialNumber: E219160
>> [74516.323309] usblp 1-3:1.1: usblp3: USB Bidirectional printer dev 14
>> if 1 alt 0 proto 2 vid 0x040A pid 0x4043
>> [74516.325179] usb-storage 1-3:1.2: USB Mass Storage device detected
>> [74516.325460] scsi14 : usb-storage 1-3:1.2
>> [74517.327634] scsi 14:0:0:0: Direct-Access     KODAK         SD/MMC
>> card 1.00 PQ: 0 ANSI: 0
>> [74517.328418] sd 14:0:0:0: Attached scsi generic sg9 type 0
>> [74517.348059] sd 14:0:0:0: [sdg] Attached SCSI removable disk
>> [74517.496609] usblp3: removed
>> [74517.505022] usblp 1-3:1.1: usblp3: USB Bidirectional printer dev 14
>> if 1 alt 0 proto 2 vid 0x040A pid 0x4043
>> [74518.204426] IPv6: wlan0: IPv6 duplicate address
>> 2601:3:3000:e17:226:82ff:fe3e:b46b detected!
> <snip>
>
>   IPv6 duplicate address 2601:3:3000:e17:226:82ff:fe3e:b46b detected!
>> Dec 21 09:46:50 main kernel: [74617.468186] IPv6: wlan0: IPv6 duplicate address 2601:3:3000:e17:226:82ff:fe3e:b46b detected!
>> scott at main:~$
>>
>>
>>
>> scanimage --list-devices:
>>
>> scott at main:~$ scanimage --list-devices
>> [bjnp] create_broadcast_socket: bind socket to local address failed -
>> Cannot assign requested address
>> [bjnp] create_broadcast_socket: bind socket to local address failed -
>> Cannot assign requested address
>> device `kodakaio:libusb:001:014' is a Kodak KODAK ESP 3200 Series AiO
>> flatbed scanner
>> scott at main:~$
>>
>>
>>
>> sudo lsusb:
>>
>> scott at main:~$ sudo lsusb
>> [sudo] password for scott:
>> Bus 007 Device 005: ID 10d5:55a2 Uni Class Technology Co., Ltd 2Port
>> KVMSwitcher
>> Bus 007 Device 004: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0
>> for Bluetooth
>> Bus 007 Device 003: ID 046d:c526 Logitech, Inc. Nano Receiver
>> Bus 007 Device 002: ID 058f:9254 Alcor Micro Corp. Hub
>> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 002 Device 003: ID 058f:6364 Alcor Micro Corp. AU6477 Card Reader
>> Controller
>> Bus 002 Device 002: ID 1058:070b Western Digital Technologies, Inc.
>> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 001 Device 012: ID 1058:1130 Western Digital Technologies, Inc.
>> Bus 001 Device 014: ID 040a:4043 Kodak Co.
>> Bus 001 Device 013: ID 1415:2000 Nam Tai E&E Products Ltd. or OmniVision
>> Technologies, Inc. Sony Playstation Eye
>> Bus 001 Device 010: ID 04cc:1521 ST-Ericsson USB 2.0 Hub
>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> scott at main:~$
>>
>> Just to let you know, because I didn't mention this earlier, I did
>> uninstall and reinstall the printer.
>>
> Sorry for the delayed reply - I have to go to work.
>
> It looks like your printer is now detected and working on Bus 001 Device
> 014, can you try scanning with xsane from the terminal again & show the
> output?
>
> This is a complete WAG: try installing bjnp to see if that clears the
> bjnp port issue:
>
> $ sudo apt-get install cups-backend-bjnp
>
> Afterwards, see if there is any change when using 'scanimage
> --list-devices'.
>
>
>
>
Here is the scanimage I forgot in the last email.

scott at main:~$ scanimage
[bjnp] create_broadcast_socket: bind socket to local address failed - 
Cannot assign requested address
scanimage: output is not a file, exiting
scott at main:~$ --list-devices


-- 

Scott Blair

save on backup time BackUpDevice=null