Xsane not working

NoOp glgxg at sbcglobal.net
Tue Dec 23 05:49:17 UTC 2014


On 12/22/2014 10:41 AM, Scott Blair wrote:
> On 12/22/2014 01:17 PM, NoOp wrote:
>> On 12/21/2014 06:50 AM, Scott Blair wrote:
>>> On 12/21/2014 12:09 AM, NoOp wrote:
>>>> On 12/20/2014 06:58 PM, Scott Blair wrote:
>>>>> On 12/20/2014 05:22 PM, NoOp wrote:
>>>>>> dmesg | tail
>>>>> http://paste.ubuntu.com/9585507/
>>>>>
>>>> Thanks. kodakaio.conf looks stock - I was looking to see if it had been
>>>> modified for a specific IP address.
>>>>
>>>> I don't see Bus 001 Device 011 (device `kodakaio:libusb:001:011') in
>>>> your lsusb...
>>>>
>>>> Turn off the scanner/printer & turn back on, then C&P to pastebin the
>>>> last 20 or so lines of:
>>>>
>>>> $ dmesg
>>>> $ cat /var/log/syslog
>>>>
>>>> and
>>>>
>>>> $ scanimage --list-devices
>>>> $ sudo lsusb
>>>>
>>>> Note: you should be seeing something similar to the following (replacing
>>>> Epson with kodak of course):
>>>>
>>>> $ scanimage --list-devices
>>>> device `epkowa:usb:002:009' is a Epson Stylus SX620FW/Stylus Office
>>>> BX625FWD/TX620FWD/ME OFFICE 960FWD/WorkForce 630 Series flatbed scanner
>>>>
>>>> $ lsusb
>>>> Bus 002 Device 009: ID 04b8:085d Seiko Epson Corp. PX-603F [ME OFFICE
>>>> 960FWD Series/Stylus Office BX625FWD/TX620FWD Series]
>>>>
>>>>
>>>>
>>> dmesg:
>> <snip>
>>> [74514.945516] IPv6: wlan0: IPv6 duplicate address
>>> 2601:3:3000:e17:226:82ff:fe3e:b46b detected!
>>> [74516.162052] usb 1-3: new high-speed USB device number 14 using ehci-pci
>>> [74516.308455] usb 1-3: New USB device found, idVendor=040a, idProduct=4043
>>> [74516.308468] usb 1-3: New USB device strings: Mfr=5, Product=6,
>>> SerialNumber=7
>>> [74516.308475] usb 1-3: Product: KODAK ESP 3200 Series AiO
>>> [74516.308481] usb 1-3: Manufacturer: Eastman Kodak Company
>>> [74516.308486] usb 1-3: SerialNumber: E219160
>>> [74516.323309] usblp 1-3:1.1: usblp3: USB Bidirectional printer dev 14
>>> if 1 alt 0 proto 2 vid 0x040A pid 0x4043
>>> [74516.325179] usb-storage 1-3:1.2: USB Mass Storage device detected
>>> [74516.325460] scsi14 : usb-storage 1-3:1.2
>>> [74517.327634] scsi 14:0:0:0: Direct-Access     KODAK         SD/MMC
>>> card 1.00 PQ: 0 ANSI: 0
>>> [74517.328418] sd 14:0:0:0: Attached scsi generic sg9 type 0
>>> [74517.348059] sd 14:0:0:0: [sdg] Attached SCSI removable disk
>>> [74517.496609] usblp3: removed
>>> [74517.505022] usblp 1-3:1.1: usblp3: USB Bidirectional printer dev 14
>>> if 1 alt 0 proto 2 vid 0x040A pid 0x4043
>>> [74518.204426] IPv6: wlan0: IPv6 duplicate address
>>> 2601:3:3000:e17:226:82ff:fe3e:b46b detected!
>> <snip>
>>
>>   IPv6 duplicate address 2601:3:3000:e17:226:82ff:fe3e:b46b detected!
>>> Dec 21 09:46:50 main kernel: [74617.468186] IPv6: wlan0: IPv6 duplicate address 2601:3:3000:e17:226:82ff:fe3e:b46b detected!
>>> scott at main:~$
>>>
>>>
>>>
>>> scanimage --list-devices:
>>>
>>> scott at main:~$ scanimage --list-devices
>>> [bjnp] create_broadcast_socket: bind socket to local address failed -
>>> Cannot assign requested address
>>> [bjnp] create_broadcast_socket: bind socket to local address failed -
>>> Cannot assign requested address
>>> device `kodakaio:libusb:001:014' is a Kodak KODAK ESP 3200 Series AiO
>>> flatbed scanner
>>> scott at main:~$
>>>
>>>
>>>
>>> sudo lsusb:
>>>
>>> scott at main:~$ sudo lsusb
>>> [sudo] password for scott:
>>> Bus 007 Device 005: ID 10d5:55a2 Uni Class Technology Co., Ltd 2Port
>>> KVMSwitcher
>>> Bus 007 Device 004: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0
>>> for Bluetooth
>>> Bus 007 Device 003: ID 046d:c526 Logitech, Inc. Nano Receiver
>>> Bus 007 Device 002: ID 058f:9254 Alcor Micro Corp. Hub
>>> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>> Bus 002 Device 003: ID 058f:6364 Alcor Micro Corp. AU6477 Card Reader
>>> Controller
>>> Bus 002 Device 002: ID 1058:070b Western Digital Technologies, Inc.
>>> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>> Bus 001 Device 012: ID 1058:1130 Western Digital Technologies, Inc.
>>> Bus 001 Device 014: ID 040a:4043 Kodak Co.
>>> Bus 001 Device 013: ID 1415:2000 Nam Tai E&E Products Ltd. or OmniVision
>>> Technologies, Inc. Sony Playstation Eye
>>> Bus 001 Device 010: ID 04cc:1521 ST-Ericsson USB 2.0 Hub
>>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>> scott at main:~$
>>>
>>> Just to let you know, because I didn't mention this earlier, I did
>>> uninstall and reinstall the printer.
>>>
>> Sorry for the delayed reply - I have to go to work.
>>
>> It looks like your printer is now detected and working on Bus 001 Device
>> 014, can you try scanning with xsane from the terminal again & show the
>> output?
>>
>> This is a complete WAG: try installing bjnp to see if that clears the
>> bjnp port issue:
>>
>> $ sudo apt-get install cups-backend-bjnp
>>
>> Afterwards, see if there is any change when using 'scanimage
>> --list-devices'.
>>
>>
>>
>>
> Here is the scanimage I forgot in the last email.
> 
> scott at main:~$ scanimage
> [bjnp] create_broadcast_socket: bind socket to local address failed - 
> Cannot assign requested address
> scanimage: output is not a file, exiting
> scott at main:~$ --list-devices
> 
> 


Other than the "[bjnp] create_broadcast_socket: bind socket to local
address failed" part, the scanimage command shows that your scanner is
working, at least code-wise - otherwise it would have responded with:

$ scanimage
scanimage: no SANE devices found

The "scanimage: output is not a file, exiting" is normal as you didn't
specify an output. Put something in the scanner and:

$ scanimage > image.pnm

Then providing that you don't get 'scanimage: open of device kodak...
failed" enter:

$ eog > image.pnm

and let me know if you seen the scan.






More information about the ubuntu-users mailing list