wacom ctl460 tablet and 10.04

[John D Lamb]

On Sat, 2010-06-05 at 09:06 -0400, jack wallen wrote: 
> i have walked through the steps
> countless times to no avail. i do see the tablet connect if i
> tail /var/log/messages:
> 
> [54488.020749] usbcore: deregistering interface driver wacom
> [54494.355640] usbcore: registered new interface driver wacom
> [54494.356182] wacom: v1.52-pc-0.3:USB Wacom tablet driver
> [54511.784092] usb 4-1: new full speed USB device using ohci_hcd and
> address 6
> [54512.006700] usb 4-1: configuration #1 chosen from 1 choice
> [54512.015811] input: Wacom Bamboo 4x5 Pen
> as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.0/input/input32
> [54512.058632] input: Wacom Bamboo 4x5 Finger
> as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.1/input/input33

This looks correct. What does /var/log/Xorg.0.log show. If everything is
configured correctly it should give output like the following when you
do modprobe wacom. Look especially for lines starting
(II) config/udev …

(II) config/udev: Adding input device Wacom Bamboo 4x5 Pen
(/dev/input/mouse3)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo 4x5 Finger
(/dev/input/mouse4)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo 4x5 Pen
(/dev/input/event8)
(**) Wacom Bamboo 4x5 Pen: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo 4x5 Pen: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event8"
(II) Wacom Bamboo 4x5 Pen: type not specified, assuming 'stylus'.
(II) Wacom Bamboo 4x5 Pen: other types will be automatically added.
(**) Wacom Bamboo 4x5 Pen: always reports core events
(II) Wacom Bamboo 4x5 Pen: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event8"
(**) Wacom Bamboo 4x5 Pen eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo 4x5 Pen
eraser" (type: ERASER)
(--) Wacom Bamboo 4x5 Pen eraser: using pressure threshold of 61 for
button 1
(--) Wacom Bamboo 4x5 Pen eraser: Wacom USB Bamboo tablet speed=38400
maxX=14720 maxY=9200 maxZ=1023 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo 4x5 Pen eraser: top X=0 top Y=0 bottom X=14720 bottom
Y=9200 resol X=2540 resol Y=2540
(II) Wacom Bamboo 4x5 Pen: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo 4x5 Pen" (type:
STYLUS)
(--) Wacom Bamboo 4x5 Pen: top X=0 top Y=0 bottom X=14720 bottom Y=9200
resol X=2540 resol Y=2540
(II) config/udev: Adding input device Wacom Bamboo 4x5 Finger
(/dev/input/event9)
(**) Wacom Bamboo 4x5 Finger: Applying InputClass "evdev touchpad
catchall"
(**) Wacom Bamboo 4x5 Finger: Applying InputClass "touchpad catchall"
(**) Wacom Bamboo 4x5 Finger: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event9"
(II) Wacom Bamboo 4x5 Finger: type not specified, assuming 'touch'.
(II) Wacom Bamboo 4x5 Finger: other types will be automatically added.
(**) Wacom Bamboo 4x5 Finger: always reports core events
(II) Wacom Bamboo 4x5 Finger: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event9"
(**) Wacom Bamboo 4x5 Finger pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo 4x5 Finger
pad" (type: PAD)
(--) Wacom Bamboo 4x5 Finger pad: using pressure threshold of 61 for
button 1
(--) Wacom Bamboo 4x5 Finger pad: Wacom USB Bamboo tablet speed=38400
maxX=0 maxY=0 maxZ=1023 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo 4x5 Finger pad: top X=0 top Y=0 bottom X=0 bottom Y=0
resol X=2540 resol Y=2540
(II) Wacom Bamboo 4x5 Finger: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo 4x5
Finger" (type: TOUCH)
(--) Wacom Bamboo 4x5 Finger: top X=0 top Y=0 bottom X=480 bottom Y=320
resol X=2540 resol Y=2540


-- 
JDL