Printer invisible thru USB-switch
Tom Rausner
tom at tomtech.dk
Sat Feb 16 19:26:17 UTC 2008
Hi !
Kristian <kristian at zimmer428.net> asked me to send the output from
"lsusb" and "dmesg". Here it is as attached files.
Tom
-------------- next part --------------
[ 0.000000] Linux version 2.6.22-14-generic (buildd at king) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 02:46:46 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
[ 0.000000] Command line: root=UUID=4547011d-f250-426c-b21b-5cd7a64a7360 ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe87c00 (usable)
[ 0.000000] BIOS-e820: 000000007fe87c00 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved)
[ 0.000000] BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 523911) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000FC0D0 checksum 0
[ 0.000000] ACPI: RSDP 000FC0D0, 0014 (r0 DELL )
[ 0.000000] ACPI: RSDT 7FE88148, 0048 (r1 DELL M07 27D60A13 ASL 61)
[ 0.000000] ACPI: FACP 7FE89000, 0074 (r1 DELL M07 27D60A13 ASL 61)
[ 0.000000] ACPI: DSDT 7FE89C00, 4DE4 (r1 INT430 SYSFexxx 1001 INTL 20050624)
[ 0.000000] ACPI: FACS 7FE98400, 0040
[ 0.000000] ACPI: HPET 7FE89700, 0038 (r1 DELL M07 1 ASL 61)
[ 0.000000] ACPI: APIC 7FE89800, 0068 (r1 DELL M07 27D60A13 ASL 47)
[ 0.000000] ACPI: ASF! 7FE89400, 005B (r16 DELL M07 27D60A13 ASL 61)
[ 0.000000] ACPI: MCFG 7FE897C0, 003E (r16 DELL M07 27D60A13 ASL 61)
[ 0.000000] ACPI: SLIC 7FE8989C, 0024 (r1 DELL M07 27D60A13 ASL 61)
[ 0.000000] ACPI: TCPA 7FE89B00, 0032 (r1 DELL M07 27D60A13 ASL 61)
[ 0.000000] ACPI: BOOT 7FE893C0, 0028 (r1 DELL M07 27D60A13 ASL 61)
[ 0.000000] ACPI: SSDT 7FE881D3, 04DC (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007fe87000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 523911) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007fe87000
[ 0.000000] No mptable found.
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 523911
[ 0.000000] On node 0 totalpages: 523814
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1125 pages reserved
[ 0.000000] DMA zone: 2818 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7106 pages used for memmap
[ 0.000000] DMA32 zone: 512709 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 515527
[ 0.000000] Kernel command line: root=UUID=4547011d-f250-426c-b21b-5cd7a64a7360 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 50.874732] time.c: Detected 2330.212 MHz processor.
[ 50.876973] Console: colour VGA+ 80x25
[ 50.876990] Checking aperture...
[ 50.877002] Calgary: detecting Calgary via BIOS EBDA area
[ 50.877004] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 50.902510] Memory: 2054632k/2095644k available (2274k kernel code, 40624k reserved, 1185k data, 296k init)
[ 50.902556] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 50.979712] Calibrating delay using timer specific routine.. 4665.06 BogoMIPS (lpj=9330134)
[ 50.979744] Security Framework v1.0.0 initialized
[ 50.979753] SELinux: Disabled at boot.
[ 50.979928] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 50.981375] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 50.982041] Mount-cache hash table entries: 256
[ 50.982178] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 50.982181] CPU: L2 cache: 4096K
[ 50.982183] CPU 0/0 -> Node 0
[ 50.982185] using mwait in idle threads.
[ 50.982186] CPU: Physical Processor ID: 0
[ 50.982188] CPU: Processor Core ID: 0
[ 50.982193] CPU0: Thermal monitoring enabled (TM2)
[ 50.982204] SMP alternatives: switching to UP code
[ 50.982473] Early unpacking initramfs... done
[ 51.270210] ACPI: Core revision 20070126
[ 51.270248] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 51.313513] Using local APIC timer interrupts.
[ 51.356386] result 10402717
[ 51.356388] Detected 10.402 MHz APIC timer.
[ 51.359373] SMP alternatives: switching to SMP code
[ 51.359458] Booting processor 1/2 APIC 0x1
[ 53.165397] Initializing CPU#1
[ 53.242690] Calibrating delay using timer specific routine.. 4660.56 BogoMIPS (lpj=9321138)
[ 53.242696] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 53.242697] CPU: L2 cache: 4096K
[ 53.242700] CPU 1/1 -> Node 0
[ 53.242701] CPU: Physical Processor ID: 0
[ 53.242702] CPU: Processor Core ID: 1
[ 53.242707] CPU1: Thermal monitoring enabled (TM2)
[ 53.243148] Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz stepping 06
[ 51.451244] Brought up 2 CPUs
[ 53.372947] migration_cost=26
[ 51.577656] NET: Registered protocol family 16
[ 51.577727] ACPI: bus type pci registered
[ 51.577733] PCI: Using configuration type 1
[ 51.581575] ACPI: EC: Look up EC in DSDT
[ 51.592667] ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00, should be 94 [20070126]
[ 51.592672] ACPI: SSDT 7FE88190, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624)
[ 51.592792] ACPI: Interpreter enabled
[ 51.592795] ACPI: (supports S0 S3 S4 S5)
[ 51.592808] ACPI: Using IOAPIC for interrupt routing
[ 51.617247] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 51.617256] PCI: Probing PCI hardware (bus 00)
[ 51.617901] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 51.617904] PCI quirk: region 1080-10bf claimed by ICH6 GPIO
[ 51.618934] PCI: Transparent bridge - 0000:00:1e.0
[ 51.619014] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 51.619351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 51.619422] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 51.619549] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 51.619641] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXP0._PRT]
[ 51.619700] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 51.637901] ACPI: PCI Interrupt Link [LNKA] (IRQs *9 10 11)
[ 51.637984] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3
[ 51.638065] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5
[ 51.638148] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
[ 51.638229] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 51.638311] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 51.638393] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 51.638475] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 51.638564] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 51.638574] pnp: PnP ACPI init
[ 51.638580] ACPI: bus type pnp registered
[ 51.669279] pnp: PnP ACPI: found 13 devices
[ 51.669280] ACPI: ACPI bus type pnp unregistered
[ 51.669319] PCI: Using ACPI for IRQ routing
[ 51.669321] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 51.669455] NET: Registered protocol family 8
[ 51.669457] NET: Registered protocol family 20
[ 51.669471] PCI-GART: No AMD northbridge found.
[ 51.669477] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 51.669480] hpet0: 3 64-bit timers, 14318180 Hz
[ 51.670517] pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved
[ 51.670520] pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
[ 51.670522] pnp: 00:00: iomem range 0xc0000-0xcffff has been reserved
[ 51.670524] pnp: 00:00: iomem range 0xe0000-0xfffff has been reserved
[ 51.670531] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 51.670533] pnp: 00:02: ioport range 0x1000-0x1005 has been reserved
[ 51.670535] pnp: 00:02: ioport range 0x1008-0x100f has been reserved
[ 51.670539] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
[ 51.670541] pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
[ 51.670543] pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
[ 51.670546] pnp: 00:03: ioport range 0x1060-0x107f has been reserved
[ 51.670548] pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
[ 51.670550] pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
[ 51.670555] pnp: 00:08: ioport range 0xc80-0xcaf has been reserved
[ 51.670557] pnp: 00:08: ioport range 0xcc0-0xcff could not be reserved
[ 51.670559] pnp: 00:08: ioport range 0x910-0x91f has been reserved
[ 51.670561] pnp: 00:08: ioport range 0x920-0x92f has been reserved
[ 51.670563] pnp: 00:08: ioport range 0xcbc-0xcbf has been reserved
[ 51.670565] pnp: 00:08: ioport range 0x930-0x97f has been reserved
[ 51.670570] pnp: 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved
[ 51.670573] pnp: 00:0c: ioport range 0xcb0-0xcbb has been reserved
[ 51.670576] pnp: 00:0c: iomem range 0xfed40000-0xfed44fff could not be reserved
[ 51.670837] PCI: Bridge: 0000:00:01.0
[ 51.670839] IO window: e000-efff
[ 51.670843] MEM window: ed000000-efefffff
[ 51.670845] PREFETCH window: d0000000-dfffffff
[ 51.670848] PCI: Bridge: 0000:00:1c.0
[ 51.670850] IO window: disabled.
[ 51.670855] MEM window: disabled.
[ 51.670858] PREFETCH window: disabled.
[ 51.670863] PCI: Bridge: 0000:00:1c.2
[ 51.670864] IO window: disabled.
[ 51.670870] MEM window: ecf00000-ecffffff
[ 51.670874] PREFETCH window: disabled.
[ 51.670879] PCI: Bridge: 0000:00:1c.3
[ 51.670882] IO window: d000-dfff
[ 51.670887] MEM window: ecc00000-ecefffff
[ 51.670891] PREFETCH window: e0000000-e01fffff
[ 51.670897] PCI: Bridge: 0000:00:1e.0
[ 51.670898] IO window: disabled.
[ 51.670904] MEM window: ecb00000-ecbfffff
[ 51.670908] PREFETCH window: disabled.
[ 51.670922] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 51.670926] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 51.670946] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 51.670951] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 51.670972] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 51.670977] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 51.671000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 51.671005] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 51.671010] Time: hpet clocksource has been installed.
[ 51.671022] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 51.671031] NET: Registered protocol family 2
[ 51.715019] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 51.715603] TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
[ 51.718672] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 51.719455] TCP: Hash tables configured (established 262144 bind 65536)
[ 51.719457] TCP reno registered
[ 51.731083] checking if image is initramfs... it is
[ 52.296247] Freeing initrd memory: 7270k freed
[ 52.299631] Simple Boot Flag at 0x79 set to 0x80
[ 54.095612] audit: initializing netlink socket (disabled)
[ 54.095628] audit(1203191232.392:1): initialized
[ 54.097366] VFS: Disk quotas dquot_6.5.1
[ 54.097411] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 54.097488] io scheduler noop registered
[ 54.097490] io scheduler anticipatory registered
[ 54.097491] io scheduler deadline registered
[ 54.097568] io scheduler cfq registered (default)
[ 54.099774] Boot video device is 0000:01:00.0
[ 54.099894] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 54.099924] assign_interrupt_mode Found MSI capability
[ 54.099927] Allocate Port Service[0000:00:01.0:pcie00]
[ 54.099997] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 54.100049] assign_interrupt_mode Found MSI capability
[ 54.100051] Allocate Port Service[0000:00:1c.0:pcie00]
[ 54.100077] Allocate Port Service[0000:00:1c.0:pcie02]
[ 54.100163] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 54.100216] assign_interrupt_mode Found MSI capability
[ 54.100218] Allocate Port Service[0000:00:1c.2:pcie00]
[ 54.100242] Allocate Port Service[0000:00:1c.2:pcie02]
[ 54.100330] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 54.100383] assign_interrupt_mode Found MSI capability
[ 54.100385] Allocate Port Service[0000:00:1c.3:pcie00]
[ 54.100409] Allocate Port Service[0000:00:1c.3:pcie02]
[ 54.117175] Real Time Clock Driver v1.12ac
[ 54.117314] hpet_resources: 0xfed00000 is busy
[ 54.117362] Linux agpgart interface v0.102 (c) Dave Jones
[ 54.117364] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 54.118229] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 54.118415] input: Macintosh mouse button emulation as /class/input/input0
[ 54.118479] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 54.121847] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 54.121851] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 54.121951] mice: PS/2 mouse device common for all mice
[ 54.122134] TCP cubic registered
[ 54.122177] NET: Registered protocol family 1
[ 54.122345] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 54.122351] Freeing unused kernel memory: 296k freed
[ 52.329013] input: AT Translated Set 2 keyboard as /class/input/input1
[ 53.470287] AppArmor: AppArmor initialized<5>audit(1203191233.560:2): type=1505 info="AppArmor initialized" pid=1269
[ 55.269493] fuse init (API version 7.8)
[ 53.476962] Failure registering capabilities with primary security module.
[ 53.498386] ACPI: SSDT 7FE888FA, 0286 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 53.498534] ACPI: SSDT 7FE886AF, 01C6 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 53.498712] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 53.498716] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 53.498883] ACPI: SSDT 7FE88B80, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 53.499020] ACPI: SSDT 7FE88875, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 53.499222] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 53.499225] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 53.502286] ACPI: Thermal Zone [THM] (59 C)
[ 53.811362] usbcore: registered new interface driver usbfs
[ 53.811384] usbcore: registered new interface driver hub
[ 53.811404] usbcore: registered new device driver usb
[ 53.811912] USB Universal Host Controller Interface driver v3.0
[ 53.812011] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 53.812023] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 53.812027] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 53.812192] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 53.812223] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
[ 53.812320] usb usb1: configuration #1 chosen from 1 choice
[ 53.812339] hub 1-0:1.0: USB hub found
[ 53.812344] hub 1-0:1.0: 2 ports detected
[ 55.624513] SCSI subsystem initialized
[ 53.838014] libata version 2.21 loaded.
[ 53.899164] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 53.899183] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 53.899189] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 53.899226] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 53.899265] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
[ 53.899360] usb usb2: configuration #1 chosen from 1 choice
[ 53.899379] hub 2-0:1.0: USB hub found
[ 53.899383] hub 2-0:1.0: 2 ports detected
[ 53.917242] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
[ 53.917255] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 53.917261] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 53.917292] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 53.917328] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
[ 53.917465] usb usb3: configuration #1 chosen from 1 choice
[ 53.917485] hub 3-0:1.0: USB hub found
[ 53.917489] hub 3-0:1.0: 2 ports detected
[ 53.935813] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
[ 53.935825] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 53.935831] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 53.935863] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 53.935898] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
[ 53.936036] usb usb4: configuration #1 chosen from 1 choice
[ 53.936053] hub 4-0:1.0: USB hub found
[ 53.936057] hub 4-0:1.0: 2 ports detected
[ 53.937176] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 53.955969] tg3.c:v3.77 (May 31, 2007)
[ 53.955993] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 53.956003] PCI: Setting latency timer of device 0000:09:00.0 to 64
[ 53.974130] eth0: Tigon3 [partno(BCM5752KFBG) rev 6002 PHY(5752)] (PCI Express) 10/100/1000Base-T Ethernet 00:18:8b:a6:a8:aa
[ 53.974137] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 53.974139] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 53.974240] ata_piix 0000:00:1f.2: version 2.11
[ 53.974246] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 53.974277] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 53.974310] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 53.974481] scsi0 : ata_piix
[ 53.974519] scsi1 : ata_piix
[ 53.974675] ata1: SATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001bfa0 irq 14
[ 53.974678] ata2: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001bfa8 irq 15
[ 53.990410] usb 1-1: configuration #1 chosen from 1 choice
[ 53.992320] hub 1-1:1.0: USB hub found
[ 53.995258] hub 1-1:1.0: 4 ports detected
[ 54.030200] ata1.00: ATA-7: SAMSUNG HM160JI, AD100-12, max UDMA/100
[ 54.030203] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 54.036756] ata1.00: configured for UDMA/100
[ 54.088173] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 55.902234] ata2.00: ATAPI: SONY DVD+/-RW DW-Q58A, UDS2, max UDMA/33
[ 54.121996] usb 1-2: configuration #1 chosen from 1 choice
[ 55.955068] ata2.00: configured for UDMA/33
[ 54.159719] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM160JI AD10 PQ: 0 ANSI: 5
[ 54.160392] scsi 1:0:0:0: CD-ROM SONY DVD+-RW DW-Q58A UDS2 PQ: 0 ANSI: 5
[ 55.955937] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 54.160530] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[ 54.161413] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 54.161420] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 54.161461] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 54.161499] ehci_hcd 0000:00:1d.7: debug port 1
[ 54.161505] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 54.161512] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000
[ 54.167415] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 54.167500] usb usb5: configuration #1 chosen from 1 choice
[ 54.167521] hub 5-0:1.0: USB hub found
[ 54.167526] hub 5-0:1.0: 8 ports detected
[ 56.009789] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[ecbff800-ecbfffff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 54.218360] hub 1-1:1.0: hub_port_status failed (err = -71)
[ 54.218364] hub 1-1:1.0: connect-debounce failed, port 2 disabled
[ 54.219447] hub 1-1:1.0: cannot disable port 2 (err = -71)
[ 54.220442] hub 1-1:1.0: hub_port_status failed (err = -71)
[ 56.016896] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 54.221442] hub 1-1:1.0: hub_port_status failed (err = -71)
[ 56.016929] sd 0:0:0:0: [sda] Write Protect is off
[ 56.016931] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 56.016953] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 56.017009] usbcore: registered new interface driver libusual
[ 54.225141] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 54.225145] Uniform CD-ROM driver Revision: 3.20
[ 54.225291] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 56.020920] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 56.020955] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 56.020957] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 56.021217] sd 0:0:0:0: [sda] Write Protect is off
[ 56.021219] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 56.021233] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 56.021237] sda:<6>Initializing USB Mass Storage driver...
[ 56.022385] scsi2 : SCSI emulation for USB Mass Storage devices
[ 54.226978] usb-storage: device found at 3
[ 54.226980] usb-storage: waiting for device to settle before scanning
[ 56.022439] usbcore: registered new interface driver usb-storage
[ 56.022441] USB Mass Storage support registered.
[ 54.230305] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 54.230323] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 54.275570] sda1 sda2 sda4 < sda5 sda6 sda7 sda8 >
[ 54.311286] sd 0:0:0:0: [sda] Attached SCSI disk
[ 54.682199] Attempting manual resume
[ 54.682202] swsusp: Resume From Partition 8:5
[ 54.682203] PM: Checking swsusp image.
[ 54.682461] PM: Resume from disk failed.
[ 54.733021] kjournald starting. Commit interval 5 seconds
[ 54.733029] EXT3-fs: mounted filesystem with ordered data mode.
[ 54.740244] usb 5-2: new high speed USB device using ehci_hcd and address 3
[ 54.852134] usb 5-2: device descriptor read/64, error -71
[ 55.067913] usb 5-2: device descriptor read/64, error -71
[ 55.281662] usb 5-2: new high speed USB device using ehci_hcd and address 4
[ 55.393168] usb 5-2: device descriptor read/64, error -71
[ 55.473351] ieee1394: Host added: ID:BUS[0-00:1023] GUID[484fc0003d7b5050]
[ 55.608947] usb 5-2: device descriptor read/64, error -71
[ 55.824728] usb 5-2: new high speed USB device using ehci_hcd and address 5
[ 56.232313] usb 5-2: device not accepting address 5, error -71
[ 56.344204] usb 5-2: new high speed USB device using ehci_hcd and address 6
[ 56.751789] usb 5-2: device not accepting address 6, error -71
[ 56.751831] usb 1-1: USB disconnect, address 2
[ 56.991549] usb 1-1: new full speed USB device using uhci_hcd and address 4
[ 57.145020] usb 1-1: configuration #1 chosen from 1 choice
[ 57.147938] hub 1-1:1.0: USB hub found
[ 57.150906] hub 1-1:1.0: 4 ports detected
[ 57.259330] usb 1-2: USB disconnect, address 3
[ 57.608459] usb 1-1.2: new full speed USB device using uhci_hcd and address 5
[ 57.736374] usb 1-1.2: configuration #1 chosen from 1 choice
[ 57.738345] hub 1-1.2:1.0: USB hub found
[ 57.741328] hub 1-1.2:1.0: 3 ports detected
[ 58.052022] usb 1-1.2.2: new full speed USB device using uhci_hcd and address 6
[ 58.169948] usb 1-1.2.2: configuration #1 chosen from 1 choice
[ 63.370514] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 63.419088] shpchp: Unknown symbol acpi_run_oshp
[ 63.419128] shpchp: Unknown symbol pci_hp_change_slot_info
[ 63.419175] shpchp: Unknown symbol pci_hp_register
[ 63.419289] shpchp: Unknown symbol pci_hp_deregister
[ 63.419378] shpchp: Unknown symbol acpi_get_hp_params_from_firmware
[ 63.431641] iTCO_vendor_support: vendor-support=0
[ 63.432469] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 63.436086] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 63.558730] sdhci: Secure Digital Host Controller Interface driver
[ 63.558732] sdhci: Copyright(c) Pierre Ossman
[ 63.558764] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 19)
[ 63.558782] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 18
[ 63.559717] mmc0: SDHCI at 0xecbff400 irq 18 DMA
[ 63.651623] nvidia: module license 'NVIDIA' taints kernel.
[ 65.701008] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 65.701018] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 65.701147] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.19 Wed Sep 12 14:08:38 PDT 2007
[ 64.047776] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa44713/0x200000
[ 64.052942] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 64.053844] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 64.062731] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 64.065508] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 64.065568] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 65.862396] input: PC Speaker as /class/input/input3
[ 64.116714] intel_rng: FWH not detected
[ 64.173608] hda_intel: azx_get_response timeout, switching to polling mode...
[ 64.522419] lp: driver loaded but no devices found
[ 64.587972] Adding 979924k swap on /dev/sda5. Priority:-1 extents:1 across:979924k
[ 66.727323] EXT3 FS on sda7, internal journal
[ 67.808269] kjournald starting. Commit interval 5 seconds
[ 66.012960] EXT3 FS on sda2, internal journal
[ 66.012964] EXT3-fs: mounted filesystem with ordered data mode.
[ 67.835310] kjournald starting. Commit interval 5 seconds
[ 66.040058] EXT3 FS on sda8, internal journal
[ 66.040061] EXT3-fs: mounted filesystem with ordered data mode.
[ 67.836911] kjournald starting. Commit interval 5 seconds
[ 66.041638] EXT3 FS on sda6, internal journal
[ 66.041640] EXT3-fs: mounted filesystem with ordered data mode.
[ 68.242209] ACPI: AC Adapter [AC] (on-line)
[ 68.266770] ACPI: Battery Slot [BAT0] (battery present)
[ 70.070887] input: Lid Switch as /class/input/input4
[ 70.071016] ACPI: Lid Switch [LID]
[ 70.071682] input: Power Button (CM) as /class/input/input5
[ 70.071810] ACPI: Power Button (CM) [PBTN]
[ 70.082106] input: Sleep Button (CM) as /class/input/input6
[ 70.082252] ACPI: Sleep Button (CM) [SBTN]
[ 68.339192] ACPI: ACPI Dock Station Driver
[ 68.386440] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 70.940445] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 70.940449] tg3: eth0: Flow control is on for TX and on for RX.
[ 72.170975] ppdev: user-space parallel port driver
[ 73.802878] audit(1203187657.173:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5415 profile="/usr/sbin/cupsd"
[ 74.249502] Failure registering capabilities with primary security module.
[ 80.865717] NET: Registered protocol family 17
[ 81.336433] NET: Registered protocol family 10
[ 81.336571] lo: Disabled Privacy Extensions
[ 89.487125] eth0: no IPv6 routers present
[ 185.223576] usb 5-2: new high speed USB device using ehci_hcd and address 7
[ 185.335435] usb 5-2: device descriptor read/64, error -71
[ 185.449391] audit(1203187774.516:4): type=1503 operation="inode_permission" requested_mask="rw" denied_mask="rw" name="/dev/tty" pid=6328 profile="/usr/sbin/cupsd"
[ 187.261478] audit(1203187774.528:5): type=1503 operation="inode_permission" requested_mask="rw" denied_mask="rw" name="/dev/tty" pid=6331 profile="/usr/sbin/cupsd"
[ 185.551204] usb 5-2: device descriptor read/64, error -71
[ 185.766995] usb 5-2: new high speed USB device using ehci_hcd and address 8
[ 185.878924] usb 5-2: device descriptor read/64, error -71
[ 186.094660] usb 5-2: device descriptor read/64, error -71
[ 186.310482] usb 5-2: new high speed USB device using ehci_hcd and address 9
[ 186.718018] usb 5-2: device not accepting address 9, error -71
[ 186.829956] usb 5-2: new high speed USB device using ehci_hcd and address 10
[ 187.237496] usb 5-2: device not accepting address 10, error -71
[ 193.559165] usb 5-2: new high speed USB device using ehci_hcd and address 11
[ 193.671059] usb 5-2: device descriptor read/64, error -71
[ 193.886809] usb 5-2: device descriptor read/64, error -71
[ 194.102586] usb 5-2: new high speed USB device using ehci_hcd and address 12
[ 194.214493] usb 5-2: device descriptor read/64, error -71
[ 199.601051] usb 5-2: new high speed USB device using ehci_hcd and address 13
[ 199.733947] usb 5-2: configuration #1 chosen from 1 choice
[ 199.734584] scsi3 : SCSI emulation for USB Mass Storage devices
[ 199.734809] usb-storage: device found at 13
[ 199.734814] usb-storage: waiting for device to settle before scanning
[ 199.942899] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 13 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5711
[ 199.942932] usbcore: registered new interface driver usblp
[ 199.942937] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 204.728060] usb-storage: device scan complete
[ 204.728728] scsi 3:0:0:0: Direct-Access HP Photosmart C418x 1.00 PQ: 0 ANSI: 2
[ 204.730590] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 204.730648] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 232.215819] audit(1203187819.535:6): type=1503 operation="inode_permission" requested_mask="rw" denied_mask="rw" name="/dev/tty" pid=6444 profile="/usr/sbin/cupsd"
[ 230.437373] audit(1203187819.551:7): type=1503 operation="inode_permission" requested_mask="rw" denied_mask="rw" name="/dev/tty" pid=6447 profile="/usr/sbin/cupsd"
[ 230.470909] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: removed
[ 759.031632] usb 5-2: USB disconnect, address 13
[ 773.118322] usb 5-2: new high speed USB device using ehci_hcd and address 14
[ 773.230187] usb 5-2: device descriptor read/64, error -71
[ 773.445980] usb 5-2: device descriptor read/64, error -71
[ 773.661762] usb 5-2: new high speed USB device using ehci_hcd and address 15
[ 773.773660] usb 5-2: device descriptor read/64, error -71
[ 773.989402] usb 5-2: device descriptor read/64, error -71
[ 774.205200] usb 5-2: new high speed USB device using ehci_hcd and address 16
[ 774.612775] usb 5-2: device not accepting address 16, error -71
[ 774.724674] usb 5-2: new high speed USB device using ehci_hcd and address 17
[ 775.132271] usb 5-2: device not accepting address 17, error -71
[ 884.573818] usb 5-2: new high speed USB device using ehci_hcd and address 18
[ 884.685694] usb 5-2: device descriptor read/64, error -71
[ 884.901492] usb 5-2: device descriptor read/64, error -71
[ 885.117263] usb 5-2: new high speed USB device using ehci_hcd and address 19
[ 885.229164] usb 5-2: device descriptor read/64, error -71
[ 885.444935] usb 5-2: device descriptor read/64, error -71
[ 885.660712] usb 5-2: new high speed USB device using ehci_hcd and address 20
[ 886.068290] usb 5-2: device not accepting address 20, error -71
[ 886.180198] usb 5-2: new high speed USB device using ehci_hcd and address 21
[ 886.587780] usb 5-2: device not accepting address 21, error -71
-------------- next part --------------
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 004: ID 413c:a005 Dell Computer Corp.
Bus 001 Device 006: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader
Bus 001 Device 005: ID 0b97:7761 O2 Micro, Inc.
Bus 001 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
More information about the ubuntu-users
mailing list