Suspend and hibernate still not working on my laptop

[Michele]

[snip]
>
> could you run 'dmesg' in a terminal and look for more
> informative error messages there?



Hello Marius,

Not sure it helps as it does not seem to point to any particular error,
however here's the dmesg messages  (the only thing I did was to remove the
orinoco_usb module from the kernel before hibernating)

Cheers,

Michele

michele at EvoN610c:~$ dmesg | tail -35
[ 2957.840000] ACPI: PCI interrupt for device 0000:02:08.0 disabled
[ 2960.040000] PM: suspend-to-disk mode set to 'shutdown'
[ 2962.684000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
[ 2962.684000] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2962.684000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [C0B9] -> GSI 10
(level, low) -> IRQ 10
[ 2962.844000] e100: eth0: e100_probe: addr 0x40100000, irq 10, MAC addr
00:08:02:93:91:66
[ 2962.864000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2964.328000] input: Power Button (FF) as /class/input/input14
[ 2964.328000] ACPI: Power Button (FF) [PWRF]
[ 2964.328000] input: Sleep Button (CM) as /class/input/input15
[ 2964.332000] ACPI: Sleep Button (CM) [C187]
[ 2964.332000] input: Lid Switch as /class/input/input16
[ 2964.332000] ACPI: Lid Switch [C188]
[ 2965.356000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 2965.356000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 2965.356000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 2965.408000] ACPI: Transitioning device [C1DA] to D3
[ 2965.408000] ACPI: Transitioning device [C1DA] to D3
[ 2965.408000] ACPI: Fan [C1DA] (off)
[ 2965.408000] ACPI: Transitioning device [C1DB] to D3
[ 2965.408000] ACPI: Transitioning device [C1DB] to D3
[ 2965.408000] ACPI: Fan [C1DB] (off)
[ 2965.412000] ACPI: Fan [C1DC] (on)
[ 2965.428000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2965.428000] ACPI: Processor [C000] (supports 8 throttling states)
[ 2965.440000] ACPI: Thermal Zone [TZ1] (46 C)
[ 2965.452000] ACPI: Thermal Zone [C1D6] (45 C)
[ 2965.544000] ACPI: AC Adapter [C186] (on-line)
[ 2965.572000] ACPI: Battery Slot [C184] (battery present)
[ 2965.576000] ACPI: Battery Slot [C185] (battery absent)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/ubuntu-users/attachments/20071024/36927189/attachment.html>