No network after installing Hoary

[Jonathan Thompson]

Hi Guys, I solved the problem. I deleted all the linux partitions
(with PartionMagic8) and then re-installed from my Hoary disk.
Everything is working now. This mail has been sent from my Hoary
installation.

Paul

On Apr 10, 2005 8:57 AM, Jonathan Thompson <ubantu001 at gmail.com> wrote:
> Guys, I too am a newbie, have upgraded from Warty (new install) to
> Hoary and have exactly the same problem. Hoary can see the local
> network but cannot see the Internet. I can ping the gateway at
> 192.168.000.001, I can enter the gateways setup prog. or ping anything
> else on the net. All the other computers on the network have no
> problem and this (Dell 9100 laptop) also has no problem if I boot to
> windows rather than Hoary. The IP is static and is 192.168.000.210
> subnet 255.255.255.000 and gateway is 192.168.000.001.
> 
> Any help will be most appreciated.
> 
> Paul
> 
> On Apr 10, 2005 8:02 AM, Vlad Sergeev <vlad.sergeev at gmail.com> wrote:
> > Hey Ingi,
> >
> > I am also a newbie in Linux and after upgrading to Hoary today ran
> > into the same problem - no ip address from dhclient.   Changing the
> > interface logical name from eth0 to eth1 did the job for me.
> >
> > Here is the contents of my /etc/network/interfaces file
> >
> > # Used by ifup(8) and ifdown(8). See the interfaces(5) manpage or
> > # /usr/share/doc/ifupdown/examples for more information.
> > auto lo
> > iface lo inet loopback
> >
> > #auto eth0
> > #iface eth0 inet dhcp static
> > #name Ethernet LAN card
> >
> > #auto eth1
> > iface eth1 inet dhcp
> > pre-up ifconfig eth1 up
> > post-down ifconfig eth1 down
> > #name Ethernet LAN card
> >
> > iface wlan0 inet static
> > pre-up ifconfig wlan0 up
> > post-down ifconfig wlan0 down
> > name Wireless LAN card
> >
> > Hope it works ...
> >
> > Cheers,
> >
> > Vlad
> >
> > --
> > ubuntu-users mailing list
> > ubuntu-users at lists.ubuntu.com
> > http://lists.ubuntu.com/mailman/listinfo/ubuntu-users
> >
>