No sound with AC97
Florian Reichert
florianr at gmx.net
Sun Oct 24 03:10:05 UTC 2004
Hello!
I still have problems with sound. Also I followed the instructions in Bug
#1254, unloaded the parport and reloaded the sound driver. ... But still
no sound. Let me provide some further information:
Notebook (Centrino) ASUS M2400N
lspci:
0000:00:00.0 Host bridge: Intel Corp. 82852/855GM Host Bridge (rev 02)
0000:00:00.1 System peripheral: Intel Corp. 855GM/GME GMCH Memory I/O
Control Registers (rev 02)
0000:00:00.3 System peripheral: Intel Corp. 855GM/GME GMCH Configuration
Process Registers (rev 02)
0000:00:02.0 VGA compatible controller: Intel Corp. 82852/855GM Integrated
Graphics Device (rev 02)
0000:00:02.1 Display controller: Intel Corp. 82852/855GM Integrated
Graphics Device (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #1 (rev
03)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #2 (rev
03)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #3 (rev
03)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB (ICH4) USB2 EHCI
Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 83)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller
(rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage
Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBM (ICH4) SMBus Controller (rev
03)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB (ICH4) AC'97
Audio Controller (rev 03)
0000:00:1f.6 Modem: Intel Corp. 82801DB (ICH4) AC'97 Modem Controller (rev
03)
0000:01:03.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a9)
0000:01:03.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a9)
0000:01:03.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394
Controller (rev 01)
0000:01:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
0000:01:05.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B Mini
PCI Adapter (rev 04)
#####################################################
dmesage:
Linux version 2.6.8.1-3-386 (buildd at terranova) (gcc version 3.3.4 (Debian
1:3.3.4-9ubuntu5)) #1 Tue Oct 12 12:41:57 BST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000f740000 (usable)
BIOS-e820: 000000000f740000 - 000000000f750000 (ACPI data)
BIOS-e820: 000000000f750000 - 000000000f800000 (ACPI NVS)
247MB LOWMEM available.
On node 0 totalpages: 63296
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 59200 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM ) @ 0x000f4b60
ACPI: RSDT (v001 A M I OEMRSDT 0x03000408 MSFT 0x00000097) @ 0x0f740000
ACPI: FADT (v002 A M I OEMFACP 0x03000408 MSFT 0x00000097) @ 0x0f740200
ACPI: OEMB (v001 A M I OEMBIOS 0x03000408 MSFT 0x00000097) @ 0x0f750040
ACPI: DSDT (v001 0ABBD 0ABBD001 0x00000001 MSFT 0x02000001) @ 0x00000000
ACPI: PM-Timer IO Port: 0xe408
Built 1 zonelists
Kernel command line: root=/dev/hda12 ro nolapic quiet splash
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 1400.501 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 243660k/253184k available (1336k kernel code, 8816k reserved, 728k
data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
Calibrating delay loop... 2777.08 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: a7e9fbbf 00000000 00000000 00000000
CPU: After vendor identify, caps: a7e9fbbf 00000000 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: a7e9fbbf 00000000 00000000 00000040
CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
ACPI: IRQ9 SCI: Edge set to Level Trigger.
checking if image is initramfs...it isn't (ungzip failed); looks like an
initrd
Freeing initrd memory: 4116k freed
NET: Registered protocol family 16
EISA bus registered
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Enabled i801 SMBus device
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: Embedded Controller [EC0] (gpe 28)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 12)
ACPI: Power Resource [GFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f2e10
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x39ea, dseg 0xf0000
pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0a: ioport range 0xcf8-0xcff could not be reserved
PnPBIOS: Unknown tag '0x0', length '1'.
PnPBIOS: Unknown tag '0x8', length '7'.
PnPBIOS: Unknown tag '0x8', length '7'.
PnPBIOS: Resource structure does not contain an end tag.
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 4
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 4 (level, low) -> IRQ 4
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 7
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI interrupt 0000:01:03.0[A] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI interrupt 0000:01:03.1[B] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:01:03.2[C] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:01:04.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 5 (level, low) -> IRQ 5
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch at atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 7 (level, low) -> IRQ 7
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S3 S4 S5)
ACPI wakeup devices:
P0P1 LAN0 CBS0 CBS1 P394 MODM USB1 USB2 USB3 EHCI SLPB
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4116 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 204k freed
vesafb: probe of vesafb0 failed with error -6
ACPI: Processor [CPU1] (supports C1 C2 C3, 8 throttling states)
ACPI: Thermal Zone [THRM] (61 C)
ACPI: Fan [FN00] (off)
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 5 (level, low) -> IRQ 5
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK4025GAS, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB), CHS=65535/16/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 p10 p11 p12 >
hdc: TOSHIBA DVD-ROM SD-R2512, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
EXT3 FS on hda12, internal journal
SCSI subsystem initialized
Synaptics Touchpad, model: 1
Firmware: 4.6
180 degree mounted touchpad
Sensor: 18
new absolute packet format
Touchpad has extended capability bits
-> four buttons
-> multifinger detection
-> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ieee1394: Initialized config rom entry `ip1394'
sbp2: $Rev: 1219 $ Ben Collins <bcollins at debian.org>
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
lp0: using parport0 (interrupt-driven).
Capability LSM initialized
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm at uk.sistina.com
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x50
cdrom: open failed.
Real Time Clock Driver v1.12
input: PC Speaker
inserting floppy driver for 2.6.8.1-3-386
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 855 Chipset.
agpgart: Maximum main memory to use for agp memory: 196M
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xf0000000
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB (ICH4) USB UHCI #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 5, io base 0000d480
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB (ICH4) USB UHCI #2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 5, io base 0000d800
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB (ICH4) USB UHCI #3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 5, io base 0000d880
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 4 (level, low) -> IRQ 4
ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 4, pci mem d018ac00
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
hw_random: RNG not detected
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
PCI: Enabling device 0000:00:1f.5 (0005 -> 0007)
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 7 (level, low) -> IRQ 7
unable to grab IRQ 7
Intel ICH: probe of 0000:00:1f.5 failed with error -16
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 7 (level, low) -> IRQ 7
unable to grab IRQ 7
Intel ICH Modem: probe of 0000:00:1f.6 failed with error -16
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:01:03.0[A] -> GSI 7 (level, low) -> IRQ 7
Yenta: CardBus bridge found at 0000:01:03.0 [1043:1754]
Yenta: ISA IRQ mask 0x0408, PCI irq 0
Socket status: 30000006
ACPI: PCI interrupt 0000:01:03.1[B] -> GSI 5 (level, low) -> IRQ 5
Yenta: CardBus bridge found at 0000:01:03.1 [1043:1754]
Yenta: ISA IRQ mask 0x0408, PCI irq 5
Socket status: 30000006
ohci1394: $Rev: 1223 $ Ben Collins <bcollins at debian.org>
ACPI: PCI interrupt 0000:01:03.2[C] -> GSI 5 (level, low) -> IRQ 5
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5]
MMIO=[ff7fe000-ff7fe7ff] Max Packet=[2048]
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
8139cp: pci dev 0000:01:04.0 (id 10ec:8139 rev 10) is not an
8139C+ compatible chip
8139cp: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:01:04.0[A] -> GSI 5 (level, low) -> IRQ 5
eth0: RealTek RTL8139 at 0xc800, 00:0e:a6:73:cb:f2, IRQ 5
eth0: Identified 8139 chip type 'RTL-8101'
ieee80211_crypt: registered algorithm 'NULL'
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, 0.53
ipw2100: Copyright(c) 2003-2004 Intel Corporation
ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 5 (level, low) -> IRQ 5
ipw2100: 0000:01:05.0: Detected at mem: 0xFF7FF000-0xFF7FFFFF -> d02da000,
irq: 5
eth1: Using hotplug firmware load.
ipw2100: IRQ ignored
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000317fb36]
eth1: Bound to 0000:01:05.0
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 17
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02cc0c0(lo)
IPv6 over IPv4 tunneling driver
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [AC0] (on-line)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LID]
cs: IO port probe 0x0100-0x04ff: excluding 0x480-0x48f
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
cpufreq: CPU0 - ACPI performance management activated.
cpufreq: *P0: 1400 MHz, 28000 mW, 10 uS
cpufreq: P1: 1400 MHz, 28000 mW, 10 uS
cpufreq: P2: 1400 MHz, 28000 mW, 10 uS
cpufreq: P3: 1400 MHz, 28000 mW, 10 uS
cpufreq: P4: 1400 MHz, 28000 mW, 10 uS
cpufreq: P5: 1400 MHz, 28000 mW, 10 uS
cpufreq: P6: 1200 MHz, 24000 mW, 10 uS
cpufreq: P7: 1000 MHz, 20000 mW, 10 uS
cpufreq: P8: 800 MHz, 16000 mW, 10 uS
cpufreq: P9: 600 MHz, 12000 mW, 10 uS
eth0: no IPv6 routers present
[drm] Initialized i830 1.3.2 20021108 on minor 0: Intel Corp. 82852/855GM
Integrated Graphics Device
[drm] Initialized i830 1.3.2 20021108 on minor 1: Intel Corp. 82852/855GM
Integrated Graphics Device (#2)
mtrr: base(0xf0020000) is not aligned on a size(0x300000) boundary
ipw2100: IRQ ignored
pnp: Device 00:0e disabled.
ipw2100: IRQ ignored
ipw2100: IRQ ignored
ipw2100: IRQ ignored
ipw2100: IRQ ignored
ipw2100: IRQ ignored
ipw2100: IRQ ignored
More information about the ubuntu-users
mailing list