SuspendHowto

[OIM]

I tried the PMSuspend stuff and was not able to suspend to disk.

My laptop is a Fujitsu Siemens Amilo K7600.

Pressing the PowerButn launch the suspend stuff. The video switch on the
console and hibernation process seems to start ... but after few seconds
the video come back to the X11 display and the laptop is up and
running ... I have just lost my USB mouse (the glidepoint is working).

Here is the traces from syslog ...
Any suggestion ?



Nov 12 09:35:00 localhost kernel: Stopping tasks:
=================================================================================================================================|
Nov 12 09:35:01 localhost kernel: Freeing
memory: .........................................................................................................|
Nov 12 09:35:01 localhost kernel: usbhid 2-2:1.0: resume is unsafe!
Nov 12 09:35:01 localhost kernel: usb 2-2: no poweroff yet, suspending
instead
Nov 12 09:35:01 localhost kernel: hci_usb 2-1:1.0: resume is unsafe!
Nov 12 09:35:01 localhost kernel: hci_usb 2-1:1.1: resume is unsafe!
Nov 12 09:35:01 localhost kernel: usb 2-1: no poweroff yet, suspending
instead
Nov 12 09:35:01 localhost kernel: usb usb3: no poweroff yet, suspending
instead
Nov 12 09:35:01 localhost kernel: hci_usb: probe of 2-1:1.2 failed with
error -113
Nov 12 09:35:01 localhost kernel: ACPI: PCI interrupt 0000:00:11.1[A]:
no GSI
Nov 12 09:35:01 localhost kernel: ACPI: PCI interrupt 0000:00:11.5[C] ->
GSI 5 (level, low) -> IRQ 5
Nov 12 09:35:01 localhost kernel: ACPI: PCI interrupt 0000:02:00.0[A] ->
GSI 7 (level, low) -> IRQ 7
Nov 12 09:35:01 localhost kernel: hub 3-0:1.0: reactivate --> -22
Nov 12 09:35:01 localhost kernel: hub 3-0:1.0: reactivate --> -22
Nov 12 09:35:01 localhost kernel: Restarting tasks... done
Nov 12 09:35:09 localhost kernel: 8139too Fast Ethernet driver 0.9.27
Nov 12 09:35:09 localhost kernel: ACPI: PCI interrupt 0000:02:00.0[A] ->
GSI 7 (level, low) -> IRQ 7
Nov 12 09:35:09 localhost kernel: eth0: RealTek RTL8139 at 0x4000,
00:10:60:5f:6a:9d, IRQ 7
Nov 12 09:35:09 localhost kernel: eth0:  Identified 8139 chip type
'RTL-8139C'
Nov 12 09:35:10 localhost kernel: eth0: link up, 10Mbps, half-duplex,
lpa 0x0000Nov 12 09:35:12 localhost udev[8051]: removing device node
'/dev/vcsa12'
Nov 12 09:35:12 localhost udev[8052]: removing device node '/dev/vcs12'
Nov 12 09:35:17 localhost udev[8100]: removing device node '/dev/vcs12'
Nov 12 09:35:17 localhost udev[8103]: removing device node '/dev/vcsa12'
Nov 12 09:35:18 localhost kernel: ACPI: Power Button (FF) [PWRF]
Nov 12 09:35:18 localhost kernel: ACPI: Sleep Button (CM) [SBTN]
Nov 12 09:35:18 localhost kernel: ACPI: Lid Switch [LID]
Nov 12 09:35:21 localhost kernel: eth0: no IPv6 routers present
N