Mounting a SCSI CD writer ?
Vincent Trouilliez
vincent.trouilliez at wanadoo.fr
Sun Dec 26 17:40:59 UTC 2004
Some more info. I tried burning with another program, I installed
"Gnomebaker". When I tried to burn an Audio CD from OGG files, it said
"Failed to open output file : on such file or directory", or something
like that.
I ran 'dmes', and here, it seems that the card and writer are properly
recognised, and the writer attached to 'sr0', as I assumed.
************
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 2940A Ultra SCSI adapter>
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
(scsi1:A:2): 20.000MB/s transfers (20.000MHz, offset 15)
Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi generic sg1 at scsi1, channel 0, id 2, lun 0, type 5
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr0 at scsi1, channel 0, id 2, lun 0
************
But then, it prints errors along the lines of :
**************
cdrom: open failed.
cdrom: open failed.
sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
*************
it prints this kind of error at least two dozen times ! :-O
I attached the file to this message, if anyone could maybe have a look ?
Two things :
Normally I have also a SCSI scanner (sg0) connect on the external SCSI
socket, but it is NOT connected at present, is that a problem ?
Also, the SCSI drivehas lots of jumpers at the back, and I don't have a
clue how to set them. So since it was working fine on my dad's machine,
I just left them alone. Maybe I need to change some of these jumpers ?
Vince
-------------- next part --------------
0000:00:03.0 to 64
ohci_hcd 0000:00:03.0: irq 5, pci mem e09ab000
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 49472 usecs
intel8x0: clocking to 47493
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 2940A Ultra SCSI adapter>
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
(scsi1:A:2): 20.000MB/s transfers (20.000MHz, offset 15)
Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi generic sg1 at scsi1, channel 0, id 2, lun 0, type 5
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr0 at scsi1, channel 0, id 2, lun 0
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
8139cp: pci dev 0000:01:02.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:01:02.0[A] -> GSI 5 (level, low) -> IRQ 5
eth0: RealTek RTL8139 at 0x9400, 00:4f:4e:0f:ea:9d, IRQ 5
eth0: Identified 8139 chip type 'RTL-8139C'
Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI interrupt 0000:01:03.0[A] -> GSI 5 (level, low) -> IRQ 5
bttv0: Bt878 (rev 17) at 0000:01:03.0, irq: 5, latency: 32, mmio: 0xdc000000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00fff3ff [init]
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: pinnacle/mt: id=4 info="PAL+SECAM / mono" radio=no
bttv0: using tuner=33
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tda9885/6/7: chip found @ 0x86
tuner: chip found at addr 0xc0 i2c-bus bt878 #0 [sw]
tuner: type set to 33 (MT20xx universal) by bt878 #0 [sw]
tuner: microtune: companycode=4d54 part=04 rev=04
tuner: microtune MT2032 found, OK
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI interrupt 0000:01:03.1[A] -> GSI 5 (level, low) -> IRQ 5
bt878(0): Bt878 (rev 17) at 01:03.1, irq: 5, latency: 32, memory: 0xdc001000
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
NET: Registered protocol family 24
NET: Registered protocol family 17
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02cc0c0(lo)
IPv6 over IPv4 tunneling driver
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
ACPI: Power Button (FF) [PWRF]
[drm] Initialized r128 2.5.0 20030725 on minor 0: ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:02:00.0 into 1x mode
eth0: no IPv6 routers present
udf: registering filesystem
Attached scsi generic sg0 at scsi0, channel 0, id 6, lun 0, type 0
Attached scsi generic sg1 at scsi1, channel 0, id 2, lun 0, type 5
cdrom: open failed.
cdrom: open failed.
sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
cdrom: open failed.
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: This disc doesn't have any tracks I recognize!
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
cdrom: open failed.
cdrom: open failed.
UDF-fs: No VRS found
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
cdrom: This disc doesn't have any tracks I recognize!
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 1
ISOFS: changing to secondary root
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
end_request: I/O error, dev sr0, sector 64
isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16
sr0: CDROM (ioctl) error, command: Read TOC 00 00 00 00 00 00 00 0c 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
SCSI error: host 1 id 2 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 4
sr0: CDROM (ioctl) error, command: Test Unit Ready 00 00 00 00 00
Current sr: sense key Hardware Error
Additional sense: Tracking servo failure
cdrom: This disc doesn't have any tracks I recognize!
cdrom: This disc doesn't have any tracks I recognize!
end_request: I/O error, dev sr0, sector 64
isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16
More information about the ubuntu-users
mailing list