Fw: DHCP on startup
thephotoman
rantman_2000 at yahoo.com
Sat Dec 11 02:49:59 UTC 2004
Philip wrote:
> Anyone have an idea on this problem?
> ----- Original Message -----
> *From:* James McCormick <mailto:rantman_2000 at yahoo.com>
> *To:* Philip <mailto:p.vassar at comcast.net>
> *Sent:* Friday, December 10, 2004 10:10 AM
> *Subject:* Re: DHCP on startup
>
> Philip wrote:
>
>>can you provide a copy of dmesg output? also I am thinking you are plugged
>>in to a router that provides dhcp...
>>If you want the warty box to run as a dhcp server that is something else.
>>
>>
>>----- Original Message -----
>>From: "thephotoman" <rantman_2000 at yahoo.com>
>>To: <ubuntu-users at lists.ubuntu.com>
>>Sent: Friday, December 10, 2004 9:42 AM
>>Subject: DHCP on startup
>>
>>
>>
>>
>>>For some reason, my fresh install of Warty won't get IP information from
>>>DHCP on startup automatically. How do I configure it so that it does?
>>>
>>>
>>>--
>>>ubuntu-users mailing list
>>>ubuntu-users at lists.ubuntu.com
>>>http://lists.ubuntu.com/mailman/listinfo/ubuntu-users
>>>
>>>
>>>--
>>>No virus found in this incoming message.
>>>Checked by AVG Anti-Virus.
>>>Version: 7.0.289 / Virus Database: 265.5.0 - Release Date: 12/9/04
>>>
>>>
>>>
>>
>>
>>
>
> The dmesg output is as follows:
>
>>s 64M @ 0xe8000000
>>cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
>>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>>shpchp: shpc_init : shpc_cap_offset == 0
>>shpchp: shpc_init : shpc_cap_offset == 0
>>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>>usbcore: registered new driver usbfs
>>usbcore: registered new driver hub
>>USB Universal Host Controller Interface driver v2.2
>>ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 177
>>uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB (ICH4) USB UHCI #1
>>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>>uhci_hcd 0000:00:1d.0: irq 177, io base 0000dc00
>>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>>hub 1-0:1.0: USB hub found
>>hub 1-0:1.0: 2 ports detected
>>ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
>>uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB (ICH4) USB UHCI #2
>>hub 1-0:1.0: over-current change on port 1
>>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>>uhci_hcd 0000:00:1d.1: irq 185, io base 0000d800
>>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>>hub 2-0:1.0: USB hub found
>>hub 2-0:1.0: 2 ports detected
>>ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193
>>uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB (ICH4) USB UHCI #3
>>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>>uhci_hcd 0000:00:1d.2: irq 193, io base 0000d400
>>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>>hub 3-0:1.0: USB hub found
>>hub 3-0:1.0: 2 ports detected
>>usb 1-1: new full speed USB device using address 2
>>hub 1-0:1.0: over-current change on port 2
>>hub 2-0:1.0: over-current change on port 1
>>hub 2-0:1.0: over-current change on port 2
>>hub 3-0:1.0: over-current change on port 1
>>hub 3-0:1.0: over-current change on port 2
>>usb 3-2: new full speed USB device using address 2
>>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1E11
>>usbcore: registered new driver usblp
>>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>>Initializing USB Mass Storage driver...
>>scsi0 : SCSI emulation for USB Mass Storage devices
>> Vendor: Y-E DATA Model: CF Card Reader Rev: 1.03
>> Type: Direct-Access ANSI SCSI revision: 02
>>Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
>> Vendor: Y-E DATA Model: SM Card Reader Rev: 1.03
>> Type: Direct-Access ANSI SCSI revision: 02
>>Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 1
>> Vendor: Y-E DATA Model: MS Card Reader Rev: 1.03
>> Type: Direct-Access ANSI SCSI revision: 02
>>Attached scsi removable disk sdc at scsi0, channel 0, id 0, lun 2
>> Vendor: Y-E DATA Model: SD Card Reader Rev: 1.03
>> Type: Direct-Access ANSI SCSI revision: 02
>>SCSI device sdd: 250880 512-byte hdwr sectors (128 MB)
>>sdd: Write Protect is off
>>sdd: Mode Sense: 1c 00 00 00
>>sdd: assuming drive cache: write through
>> /dev/scsi/host0/bus0/target0/lun3: p1
>>Attached scsi removable disk sdd at scsi0, channel 0, id 0, lun 3
>>USB Mass Storage device found at 2
>>usbcore: registered new driver usb-storage
>>USB Mass Storage support registered.
>>ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 201
>>ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller
>>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>>ehci_hcd 0000:00:1d.7: irq 201, pci mem f8ab6c00
>>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>>ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
>>hub 4-0:1.0: USB hub found
>>hub 4-0:1.0: 6 ports detected
>>usb 3-2: USB disconnect, address 2
>>ehci_hcd 0000:00:1d.7: fatal error
>>ehci_hcd 0000:00:1d.7: HC died; cleaning up
>>ACPI: PCI interrupt 0000:02:07.2[C] -> GSI 21 (level, low) -> IRQ 225
>>ehci_hcd 0000:02:07.2: NEC Corporation USB 2.0
>>ehci_hcd 0000:02:07.2: irq 225, pci mem f8b01700
>>ehci_hcd 0000:02:07.2: new USB bus registered, assigned bus number 5
>>ehci_hcd 0000:02:07.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10
>>hub 5-0:1.0: USB hub found
>>hub 5-0:1.0: 5 ports detected
>>usb 3-2: new full speed USB device using address 3
>>scsi1 : SCSI emulation for USB Mass Storage devices
>> Vendor: Y-E DATA Model: CF Card Reader Rev: 1.03
>> Type: Direct-Access ANSI SCSI revision: 02
>>Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
>> Vendor: Y-E DATA Model: SM Card Reader Rev: 1.03
>> Type: Direct-Access ANSI SCSI revision: 02
>>Attached scsi removable disk sdb at scsi1, channel 0, id 0, lun 1
>> Vendor: Y-E DATA Model: MS Card Reader Rev: 1.03
>> Type: Direct-Access ANSI SCSI revision: 02
>>Attached scsi removable disk sdc at scsi1, channel 0, id 0, lun 2
>> Vendor: Y-E DATA Model: SD Card Reader Rev: 1.03
>> Type: Direct-Access ANSI SCSI revision: 02
>>SCSI device sdd: 250880 512-byte hdwr sectors (128 MB)
>>sdd: Write Protect is off
>>sdd: Mode Sense: 1c 00 00 00
>>sdd: assuming drive cache: write through
>> /dev/scsi/host1/bus0/target0/lun3: p1
>>Attached scsi removable disk sdd at scsi1, channel 0, id 0, lun 3
>>USB Mass Storage device found at 3
>>usb 1-1: USB disconnect, address 2
>>drivers/usb/class/usblp.c: usblp0: removed
>>hw_random: RNG not detected
>>usb 1-1: new full speed USB device using address 3
>>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1E11
>>ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 209
>>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>>intel8x0_measure_ac97_clock: measured 49512 usecs
>>intel8x0: clocking to 48000
>>ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 22 (level, low) -> IRQ 217
>>gameport: pci0000:02:02.1 speed 978 kHz
>>ieee1394: Initialized config rom entry `ip1394'
>>ohci1394: $Rev: 1223 $ Ben Collins <bcollins at debian.org>
>>ACPI: PCI interrupt 0000:02:02.2[B] -> GSI 16 (level, low) -> IRQ 177
>>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177] MMIO=[efefb800-efefbfff] Max Packet=[2048]
>>ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>>ohci_hcd: block sizes: ed 64 td 64
>>ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 16 (level, low) -> IRQ 177
>>ohci_hcd 0000:02:07.0: NEC Corporation USB
>>ohci_hcd 0000:02:07.0: irq 177, pci mem f8cd1000
>>ohci_hcd 0000:02:07.0: new USB bus registered, assigned bus number 6
>>hub 6-0:1.0: USB hub found
>>hub 6-0:1.0: 3 ports detected
>>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c002105183b]
>>ACPI: PCI interrupt 0000:02:07.1[B] -> GSI 18 (level, low) -> IRQ 193
>>ohci_hcd 0000:02:07.1: NEC Corporation USB (#2)
>>ohci_hcd 0000:02:07.1: irq 193, pci mem f8d08000
>>ohci_hcd 0000:02:07.1: new USB bus registered, assigned bus number 7
>>hub 7-0:1.0: USB hub found
>>hub 7-0:1.0: 2 ports detected
>>8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
>>8139cp: pci dev 0000:02:09.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
>>8139cp: Try the "8139too" driver instead.
>>8139too Fast Ethernet driver 0.9.27
>>ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 21 (level, low) -> IRQ 225
>>eth0: RealTek RTL8139 at 0x8c00, 00:20:ed:78:17:46, IRQ 225
>>eth0: Identified 8139 chip type 'RTL-8100B/8139D'
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>eth0: link up, 10Mbps, half-duplex, lpa 0x0000
>>NET: Registered protocol family 17
>>NET: Registered protocol family 10
>>Disabled Privacy Extensions on device c02cc0c0(lo)
>>IPv6 over IPv4 tunneling driver
>>eth0: no IPv6 routers present
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>ACPI: Power Button (FF) [PWRF]
>>ACPI: Sleep Button (CM) [SLPB]
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>ide-floppy driver 0.99.newide
>>hde: 735250kB, 1470500 blocks, 512 sector size
>>hde: 735232kB, 718/64/32 CHS, 4096 kBps, 512 sector size, 3676 rpm
>>hde: The disk reports a capacity of 752896000 bytes, but the drive only handles 752877568
>>hde: The disk reports a capacity of 752896000 bytes, but the drive only handles 752877568
>> /dev/ide/host2/bus0/target0/lun0: p4
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>drivers/usb/class/usblp.c: usblp0: nonzero read/write bulk status received: -2
>>drivers/usb/class/usblp.c: usblp0: error -2 reading from printer
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>usb usb4: string descriptor 0 read error: -19
>>root at desktop:/home/thephotoman # gs menu, and select networking.
>>ESP Ghostscript 7.07 (2003-07-12)
>>Copyright 2003 artofcode LLC and Easy Software Products, all rights reserved.
>>This software comes with NO WARRANTY: see the file PUBLIC for details.
>>Error: /undefinedfilename in (menu,)
>>Operand stack:
>>
>>Execution stack:
>> %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push --nostringval-- --nostringval--
>>Dictionary stack:
>> --dict:1052/1417(ro)(G)-- --dict:0/20(G)-- --dict:68/200(L)--
>>Current allocation mode is local
>>Last OS error: 2
>>ESP Ghostscript 7.07.1: Unrecoverable error, exit code 1
>>root at desktop:/home/thephotoman #
>>
>>
>
> Thanks!
>
> ------------------------------------------------------------------------
>
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.289 / Virus Database: 265.5.0 - Release Date: 12/9/04
>
>
> ------------------------------------------------------------------------
>
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.289 / Virus Database: 265.5.0 - Release Date: 12/9/04
>
The dmesg output is as follows:
> s 64M @ 0xe8000000
> cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> shpchp: shpc_init : shpc_cap_offset == 0
> shpchp: shpc_init : shpc_cap_offset == 0
> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> USB Universal Host Controller Interface driver v2.2
> ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 177
> uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB (ICH4) USB UHCI #1
> PCI: Setting latency timer of device 0000:00:1d.0 to 64
> uhci_hcd 0000:00:1d.0: irq 177, io base 0000dc00
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
> uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB (ICH4) USB UHCI #2
> hub 1-0:1.0: over-current change on port 1
> PCI: Setting latency timer of device 0000:00:1d.1 to 64
> uhci_hcd 0000:00:1d.1: irq 185, io base 0000d800
> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193
> uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB (ICH4) USB UHCI #3
> PCI: Setting latency timer of device 0000:00:1d.2 to 64
> uhci_hcd 0000:00:1d.2: irq 193, io base 0000d400
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> usb 1-1: new full speed USB device using address 2
> hub 1-0:1.0: over-current change on port 2
> hub 2-0:1.0: over-current change on port 1
> hub 2-0:1.0: over-current change on port 2
> hub 3-0:1.0: over-current change on port 1
> hub 3-0:1.0: over-current change on port 2
> usb 3-2: new full speed USB device using address 2
> drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1E11
> usbcore: registered new driver usblp
> drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
> Initializing USB Mass Storage driver...
> scsi0 : SCSI emulation for USB Mass Storage devices
> Vendor: Y-E DATA Model: CF Card Reader Rev: 1.03
> Type: Direct-Access ANSI SCSI revision: 02
> Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
> Vendor: Y-E DATA Model: SM Card Reader Rev: 1.03
> Type: Direct-Access ANSI SCSI revision: 02
> Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 1
> Vendor: Y-E DATA Model: MS Card Reader Rev: 1.03
> Type: Direct-Access ANSI SCSI revision: 02
> Attached scsi removable disk sdc at scsi0, channel 0, id 0, lun 2
> Vendor: Y-E DATA Model: SD Card Reader Rev: 1.03
> Type: Direct-Access ANSI SCSI revision: 02
> SCSI device sdd: 250880 512-byte hdwr sectors (128 MB)
> sdd: Write Protect is off
> sdd: Mode Sense: 1c 00 00 00
> sdd: assuming drive cache: write through
> /dev/scsi/host0/bus0/target0/lun3: p1
> Attached scsi removable disk sdd at scsi0, channel 0, id 0, lun 3
> USB Mass Storage device found at 2
> usbcore: registered new driver usb-storage
> USB Mass Storage support registered.
> ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 201
> ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller
> PCI: Setting latency timer of device 0000:00:1d.7 to 64
> ehci_hcd 0000:00:1d.7: irq 201, pci mem f8ab6c00
> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
> PCI: cache line size of 128 is not supported by device 0000:00:1d.7
> ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 6 ports detected
> usb 3-2: USB disconnect, address 2
> ehci_hcd 0000:00:1d.7: fatal error
> ehci_hcd 0000:00:1d.7: HC died; cleaning up
> ACPI: PCI interrupt 0000:02:07.2[C] -> GSI 21 (level, low) -> IRQ 225
> ehci_hcd 0000:02:07.2: NEC Corporation USB 2.0
> ehci_hcd 0000:02:07.2: irq 225, pci mem f8b01700
> ehci_hcd 0000:02:07.2: new USB bus registered, assigned bus number 5
> ehci_hcd 0000:02:07.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 5 ports detected
> usb 3-2: new full speed USB device using address 3
> scsi1 : SCSI emulation for USB Mass Storage devices
> Vendor: Y-E DATA Model: CF Card Reader Rev: 1.03
> Type: Direct-Access ANSI SCSI revision: 02
> Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
> Vendor: Y-E DATA Model: SM Card Reader Rev: 1.03
> Type: Direct-Access ANSI SCSI revision: 02
> Attached scsi removable disk sdb at scsi1, channel 0, id 0, lun 1
> Vendor: Y-E DATA Model: MS Card Reader Rev: 1.03
> Type: Direct-Access ANSI SCSI revision: 02
> Attached scsi removable disk sdc at scsi1, channel 0, id 0, lun 2
> Vendor: Y-E DATA Model: SD Card Reader Rev: 1.03
> Type: Direct-Access ANSI SCSI revision: 02
> SCSI device sdd: 250880 512-byte hdwr sectors (128 MB)
> sdd: Write Protect is off
> sdd: Mode Sense: 1c 00 00 00
> sdd: assuming drive cache: write through
> /dev/scsi/host1/bus0/target0/lun3: p1
> Attached scsi removable disk sdd at scsi1, channel 0, id 0, lun 3
> USB Mass Storage device found at 3
> usb 1-1: USB disconnect, address 2
> drivers/usb/class/usblp.c: usblp0: removed
> hw_random: RNG not detected
> usb 1-1: new full speed USB device using address 3
> drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1E11
> ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 209
> PCI: Setting latency timer of device 0000:00:1f.5 to 64
> intel8x0_measure_ac97_clock: measured 49512 usecs
> intel8x0: clocking to 48000
> ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 22 (level, low) -> IRQ 217
> gameport: pci0000:02:02.1 speed 978 kHz
> ieee1394: Initialized config rom entry `ip1394'
> ohci1394: $Rev: 1223 $ Ben Collins <bcollins at debian.org>
> ACPI: PCI interrupt 0000:02:02.2[B] -> GSI 16 (level, low) -> IRQ 177
> ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177] MMIO=[efefb800-efefbfff] Max Packet=[2048]
> ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
> ohci_hcd: block sizes: ed 64 td 64
> ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 16 (level, low) -> IRQ 177
> ohci_hcd 0000:02:07.0: NEC Corporation USB
> ohci_hcd 0000:02:07.0: irq 177, pci mem f8cd1000
> ohci_hcd 0000:02:07.0: new USB bus registered, assigned bus number 6
> hub 6-0:1.0: USB hub found
> hub 6-0:1.0: 3 ports detected
> ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c002105183b]
> ACPI: PCI interrupt 0000:02:07.1[B] -> GSI 18 (level, low) -> IRQ 193
> ohci_hcd 0000:02:07.1: NEC Corporation USB (#2)
> ohci_hcd 0000:02:07.1: irq 193, pci mem f8d08000
> ohci_hcd 0000:02:07.1: new USB bus registered, assigned bus number 7
> hub 7-0:1.0: USB hub found
> hub 7-0:1.0: 2 ports detected
> 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
> 8139cp: pci dev 0000:02:09.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
> 8139cp: Try the "8139too" driver instead.
> 8139too Fast Ethernet driver 0.9.27
> ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 21 (level, low) -> IRQ 225
> eth0: RealTek RTL8139 at 0x8c00, 00:20:ed:78:17:46, IRQ 225
> eth0: Identified 8139 chip type 'RTL-8100B/8139D'
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> eth0: link up, 10Mbps, half-duplex, lpa 0x0000
> NET: Registered protocol family 17
> NET: Registered protocol family 10
> Disabled Privacy Extensions on device c02cc0c0(lo)
> IPv6 over IPv4 tunneling driver
> eth0: no IPv6 routers present
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> ACPI: Power Button (FF) [PWRF]
> ACPI: Sleep Button (CM) [SLPB]
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> ide-floppy driver 0.99.newide
> hde: 735250kB, 1470500 blocks, 512 sector size
> hde: 735232kB, 718/64/32 CHS, 4096 kBps, 512 sector size, 3676 rpm
> hde: The disk reports a capacity of 752896000 bytes, but the drive only handles 752877568
> hde: The disk reports a capacity of 752896000 bytes, but the drive only handles 752877568
> /dev/ide/host2/bus0/target0/lun0: p4
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> drivers/usb/class/usblp.c: usblp0: nonzero read/write bulk status received: -2
> drivers/usb/class/usblp.c: usblp0: error -2 reading from printer
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> usb usb4: string descriptor 0 read error: -19
> root at desktop:/home/thephotoman # gs menu, and select networking.
> ESP Ghostscript 7.07 (2003-07-12)
> Copyright 2003 artofcode LLC and Easy Software Products, all rights reserved.
> This software comes with NO WARRANTY: see the file PUBLIC for details.
> Error: /undefinedfilename in (menu,)
> Operand stack:
>
> Execution stack:
> %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push --nostringval-- --nostringval--
> Dictionary stack:
> --dict:1052/1417(ro)(G)-- --dict:0/20(G)-- --dict:68/200(L)--
> Current allocation mode is local
> Last OS error: 2
> ESP Ghostscript 7.07.1: Unrecoverable error, exit code 1
> root at desktop:/home/thephotoman #
>
I know I emailed it to you as your reply was in my e-mail inbox before
it was on the list, but I figured I'd post it to the list as well, just
so that everyone could see and help me with the problem.
More information about the ubuntu-users
mailing list