Fw: DHCP on startup

Ben Lisle ben at ben.net.au
Sat Dec 11 03:35:05 UTC 2004 

Can you get an IP address from DHCP at all?

If so, check your /etc/network/interfaces

You should have something like the following...

auto eth0 
iface eth0 inet dhcp

If you have got that and you still have no love install tcpdump and see what's going on.  If you
have access to the router/device that is handing out the IP addresses
via DHCP check the logs and see if there are errors.

Ben

On Fri, Dec 10, 2004 at 05:57:02PM -0800, Philip wrote:
>Anyone have an idea on this problem?
>----- Original Message ----- 
>From: James McCormick 
>To: Philip 
>Sent: Friday, December 10, 2004 10:10 AM
>Subject: Re: DHCP on startup
>
>
>Philip wrote: 
>can you provide a copy of dmesg output? also I am thinking you are plugged
>in to a router that provides dhcp...
>If you want the warty box to run as a dhcp server that is something else.
>
>
>----- Original Message ----- 
>From: "thephotoman" <rantman_2000 at yahoo.com>
>To: <ubuntu-users at lists.ubuntu.com>
>Sent: Friday, December 10, 2004 9:42 AM
>Subject: DHCP on startup
>
>
>  For some reason, my fresh install of Warty won't get IP information from
>DHCP on startup automatically.  How do I configure it so that it does?
>
>
>-- 
>ubuntu-users mailing list
>ubuntu-users at lists.ubuntu.com
>http://lists.ubuntu.com/mailman/listinfo/ubuntu-users
>
>
>-- 
>No virus found in this incoming message.
>Checked by AVG Anti-Virus.
>Version: 7.0.289 / Virus Database: 265.5.0 - Release Date: 12/9/04
>
>
>    
>  The dmesg output is as follows:
>
>s 64M @ 0xe8000000
>cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>shpchp: shpc_init : shpc_cap_offset == 0
>shpchp: shpc_init : shpc_cap_offset == 0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v2.2
>ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 177
>uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB (ICH4) USB UHCI #1
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: irq 177, io base 0000dc00
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
>uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB (ICH4) USB UHCI #2
>hub 1-0:1.0: over-current change on port 1
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: irq 185, io base 0000d800
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193
>uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB (ICH4) USB UHCI #3
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: irq 193, io base 0000d400
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using address 2
>hub 1-0:1.0: over-current change on port 2
>hub 2-0:1.0: over-current change on port 1
>hub 2-0:1.0: over-current change on port 2
>hub 3-0:1.0: over-current change on port 1
>hub 3-0:1.0: over-current change on port 2
>usb 3-2: new full speed USB device using address 2
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1E11
>usbcore: registered new driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>Initializing USB Mass Storage driver...
>scsi0 : SCSI emulation for USB Mass Storage devices
>  Vendor: Y-E DATA  Model: CF Card Reader    Rev: 1.03
>  Type:   Direct-Access                      ANSI SCSI revision: 02
>Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
>  Vendor: Y-E DATA  Model: SM Card Reader    Rev: 1.03
>  Type:   Direct-Access                      ANSI SCSI revision: 02
>Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 1
>  Vendor: Y-E DATA  Model: MS Card Reader    Rev: 1.03
>  Type:   Direct-Access                      ANSI SCSI revision: 02
>Attached scsi removable disk sdc at scsi0, channel 0, id 0, lun 2
>  Vendor: Y-E DATA  Model: SD Card Reader    Rev: 1.03
>  Type:   Direct-Access                      ANSI SCSI revision: 02
>SCSI device sdd: 250880 512-byte hdwr sectors (128 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 1c 00 00 00
>sdd: assuming drive cache: write through
> /dev/scsi/host0/bus0/target0/lun3: p1
>Attached scsi removable disk sdd at scsi0, channel 0, id 0, lun 3
>USB Mass Storage device found at 2
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 201
>ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: irq 201, pci mem f8ab6c00
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>usb 3-2: USB disconnect, address 2
>ehci_hcd 0000:00:1d.7: fatal error
>ehci_hcd 0000:00:1d.7: HC died; cleaning up
>ACPI: PCI interrupt 0000:02:07.2[C] -> GSI 21 (level, low) -> IRQ 225
>ehci_hcd 0000:02:07.2: NEC Corporation USB 2.0
>ehci_hcd 0000:02:07.2: irq 225, pci mem f8b01700
>ehci_hcd 0000:02:07.2: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:02:07.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 5 ports detected
>usb 3-2: new full speed USB device using address 3
>scsi1 : SCSI emulation for USB Mass Storage devices
>  Vendor: Y-E DATA  Model: CF Card Reader    Rev: 1.03
>  Type:   Direct-Access                      ANSI SCSI revision: 02
>Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
>  Vendor: Y-E DATA  Model: SM Card Reader    Rev: 1.03
>  Type:   Direct-Access                      ANSI SCSI revision: 02
>Attached scsi removable disk sdb at scsi1, channel 0, id 0, lun 1
>  Vendor: Y-E DATA  Model: MS Card Reader    Rev: 1.03
>  Type:   Direct-Access                      ANSI SCSI revision: 02
>Attached scsi removable disk sdc at scsi1, channel 0, id 0, lun 2
>  Vendor: Y-E DATA  Model: SD Card Reader    Rev: 1.03
>  Type:   Direct-Access                      ANSI SCSI revision: 02
>SCSI device sdd: 250880 512-byte hdwr sectors (128 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 1c 00 00 00
>sdd: assuming drive cache: write through
> /dev/scsi/host1/bus0/target0/lun3: p1
>Attached scsi removable disk sdd at scsi1, channel 0, id 0, lun 3
>USB Mass Storage device found at 3
>usb 1-1: USB disconnect, address 2
>drivers/usb/class/usblp.c: usblp0: removed
>hw_random: RNG not detected
>usb 1-1: new full speed USB device using address 3
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1E11
>ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>intel8x0_measure_ac97_clock: measured 49512 usecs
>intel8x0: clocking to 48000
>ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 22 (level, low) -> IRQ 217
>gameport: pci0000:02:02.1 speed 978 kHz
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: $Rev: 1223 $ Ben Collins <bcollins at debian.org>
>ACPI: PCI interrupt 0000:02:02.2[B] -> GSI 16 (level, low) -> IRQ 177
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177]  MMIO=[efefb800-efefbfff]  Max Packet=[2048]
>ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ohci_hcd: block sizes: ed 64 td 64
>ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 16 (level, low) -> IRQ 177
>ohci_hcd 0000:02:07.0: NEC Corporation USB
>ohci_hcd 0000:02:07.0: irq 177, pci mem f8cd1000
>ohci_hcd 0000:02:07.0: new USB bus registered, assigned bus number 6
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 3 ports detected
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023c002105183b]
>ACPI: PCI interrupt 0000:02:07.1[B] -> GSI 18 (level, low) -> IRQ 193
>ohci_hcd 0000:02:07.1: NEC Corporation USB (#2)
>ohci_hcd 0000:02:07.1: irq 193, pci mem f8d08000
>ohci_hcd 0000:02:07.1: new USB bus registered, assigned bus number 7
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
>8139cp: pci dev 0000:02:09.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
>8139cp: Try the "8139too" driver instead.
>8139too Fast Ethernet driver 0.9.27
>ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 21 (level, low) -> IRQ 225
>eth0: RealTek RTL8139 at 0x8c00, 00:20:ed:78:17:46, IRQ 225
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>eth0: link up, 10Mbps, half-duplex, lpa 0x0000
>NET: Registered protocol family 17
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c02cc0c0(lo)
>IPv6 over IPv4 tunneling driver
>eth0: no IPv6 routers present
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (CM) [SLPB]
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>ide-floppy driver 0.99.newide
>hde: 735250kB, 1470500 blocks, 512 sector size
>hde: 735232kB, 718/64/32 CHS, 4096 kBps, 512 sector size, 3676 rpm
>hde: The disk reports a capacity of 752896000 bytes, but the drive only handles 752877568
>hde: The disk reports a capacity of 752896000 bytes, but the drive only handles 752877568
> /dev/ide/host2/bus0/target0/lun0: p4
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>drivers/usb/class/usblp.c: usblp0: nonzero read/write bulk status received: -2
>drivers/usb/class/usblp.c: usblp0: error -2 reading from printer
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>usb usb4: string descriptor 0 read error: -19
>root at desktop:/home/thephotoman # gs menu, and select networking.
>ESP Ghostscript 7.07 (2003-07-12)
>Copyright 2003 artofcode LLC and Easy Software Products, all rights reserved.
>This software comes with NO WARRANTY: see the file PUBLIC for details.
>Error: /undefinedfilename in (menu,)
>Operand stack:
>
>Execution stack:
>   %interp_exit   .runexec2   --nostringval--   --nostringval--   --nostringval--   2   %stopped_push   --nostringval--   --nostringval--   --nostringval--   false   1   %stopped_push   --nostringval--   --nostringval--
>Dictionary stack:
>   --dict:1052/1417(ro)(G)--   --dict:0/20(G)--   --dict:68/200(L)--
>Current allocation mode is local
>Last OS error: 2
>ESP Ghostscript 7.07.1: Unrecoverable error, exit code 1
>root at desktop:/home/thephotoman #
>
>  Thanks!
>
>
>
>--------------------------------------------------------------------------------
>
>
>No virus found in this incoming message.
>Checked by AVG Anti-Virus.
>Version: 7.0.289 / Virus Database: 265.5.0 - Release Date: 12/9/04

Content-Description: "AVG certification"
>No virus found in this outgoing message.
>Checked by AVG Anti-Virus.
>Version: 7.0.289 / Virus Database: 265.5.0 - Release Date: 12/9/04

>-- 
>ubuntu-users mailing list
>ubuntu-users at lists.ubuntu.com
>http://lists.ubuntu.com/mailman/listinfo/ubuntu-users

More information about the ubuntu-users mailing list