Fw: DHCP on startup
Philip
p.vassar at comcast.net
Sat Dec 11 01:57:02 UTC 2004
Anyone have an idea on this problem?
----- Original Message -----
From: James McCormick
To: Philip
Sent: Friday, December 10, 2004 10:10 AM
Subject: Re: DHCP on startup
Philip wrote:
can you provide a copy of dmesg output? also I am thinking you are plugged
in to a router that provides dhcp...
If you want the warty box to run as a dhcp server that is something else.
----- Original Message -----
From: "thephotoman" <rantman_2000 at yahoo.com>
To: <ubuntu-users at lists.ubuntu.com>
Sent: Friday, December 10, 2004 9:42 AM
Subject: DHCP on startup
For some reason, my fresh install of Warty won't get IP information from
DHCP on startup automatically. How do I configure it so that it does?
--
ubuntu-users mailing list
ubuntu-users at lists.ubuntu.com
http://lists.ubuntu.com/mailman/listinfo/ubuntu-users
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.289 / Virus Database: 265.5.0 - Release Date: 12/9/04
The dmesg output is as follows:
s 64M @ 0xe8000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 177
uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB (ICH4) USB UHCI #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 177, io base 0000dc00
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB (ICH4) USB UHCI #2
hub 1-0:1.0: over-current change on port 1
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 185, io base 0000d800
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193
uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB (ICH4) USB UHCI #3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 193, io base 0000d400
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using address 2
hub 1-0:1.0: over-current change on port 2
hub 2-0:1.0: over-current change on port 1
hub 2-0:1.0: over-current change on port 2
hub 3-0:1.0: over-current change on port 1
hub 3-0:1.0: over-current change on port 2
usb 3-2: new full speed USB device using address 2
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1E11
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: Y-E DATA Model: CF Card Reader Rev: 1.03
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Vendor: Y-E DATA Model: SM Card Reader Rev: 1.03
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 1
Vendor: Y-E DATA Model: MS Card Reader Rev: 1.03
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdc at scsi0, channel 0, id 0, lun 2
Vendor: Y-E DATA Model: SD Card Reader Rev: 1.03
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdd: 250880 512-byte hdwr sectors (128 MB)
sdd: Write Protect is off
sdd: Mode Sense: 1c 00 00 00
sdd: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun3: p1
Attached scsi removable disk sdd at scsi0, channel 0, id 0, lun 3
USB Mass Storage device found at 2
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 201
ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 201, pci mem f8ab6c00
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 3-2: USB disconnect, address 2
ehci_hcd 0000:00:1d.7: fatal error
ehci_hcd 0000:00:1d.7: HC died; cleaning up
ACPI: PCI interrupt 0000:02:07.2[C] -> GSI 21 (level, low) -> IRQ 225
ehci_hcd 0000:02:07.2: NEC Corporation USB 2.0
ehci_hcd 0000:02:07.2: irq 225, pci mem f8b01700
ehci_hcd 0000:02:07.2: new USB bus registered, assigned bus number 5
ehci_hcd 0000:02:07.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
usb 3-2: new full speed USB device using address 3
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: Y-E DATA Model: CF Card Reader Rev: 1.03
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
Vendor: Y-E DATA Model: SM Card Reader Rev: 1.03
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdb at scsi1, channel 0, id 0, lun 1
Vendor: Y-E DATA Model: MS Card Reader Rev: 1.03
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdc at scsi1, channel 0, id 0, lun 2
Vendor: Y-E DATA Model: SD Card Reader Rev: 1.03
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdd: 250880 512-byte hdwr sectors (128 MB)
sdd: Write Protect is off
sdd: Mode Sense: 1c 00 00 00
sdd: assuming drive cache: write through
/dev/scsi/host1/bus0/target0/lun3: p1
Attached scsi removable disk sdd at scsi1, channel 0, id 0, lun 3
USB Mass Storage device found at 3
usb 1-1: USB disconnect, address 2
drivers/usb/class/usblp.c: usblp0: removed
hw_random: RNG not detected
usb 1-1: new full speed USB device using address 3
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1E11
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49512 usecs
intel8x0: clocking to 48000
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 22 (level, low) -> IRQ 217
gameport: pci0000:02:02.1 speed 978 kHz
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <bcollins at debian.org>
ACPI: PCI interrupt 0000:02:02.2[B] -> GSI 16 (level, low) -> IRQ 177
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177] MMIO=[efefb800-efefbfff] Max Packet=[2048]
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 16 (level, low) -> IRQ 177
ohci_hcd 0000:02:07.0: NEC Corporation USB
ohci_hcd 0000:02:07.0: irq 177, pci mem f8cd1000
ohci_hcd 0000:02:07.0: new USB bus registered, assigned bus number 6
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c002105183b]
ACPI: PCI interrupt 0000:02:07.1[B] -> GSI 18 (level, low) -> IRQ 193
ohci_hcd 0000:02:07.1: NEC Corporation USB (#2)
ohci_hcd 0000:02:07.1: irq 193, pci mem f8d08000
ohci_hcd 0000:02:07.1: new USB bus registered, assigned bus number 7
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
8139cp: pci dev 0000:02:09.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 21 (level, low) -> IRQ 225
eth0: RealTek RTL8139 at 0x8c00, 00:20:ed:78:17:46, IRQ 225
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
eth0: link up, 10Mbps, half-duplex, lpa 0x0000
NET: Registered protocol family 17
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02cc0c0(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
ide-floppy driver 0.99.newide
hde: 735250kB, 1470500 blocks, 512 sector size
hde: 735232kB, 718/64/32 CHS, 4096 kBps, 512 sector size, 3676 rpm
hde: The disk reports a capacity of 752896000 bytes, but the drive only handles 752877568
hde: The disk reports a capacity of 752896000 bytes, but the drive only handles 752877568
/dev/ide/host2/bus0/target0/lun0: p4
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
drivers/usb/class/usblp.c: usblp0: nonzero read/write bulk status received: -2
drivers/usb/class/usblp.c: usblp0: error -2 reading from printer
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
usb usb4: string descriptor 0 read error: -19
root at desktop:/home/thephotoman # gs menu, and select networking.
ESP Ghostscript 7.07 (2003-07-12)
Copyright 2003 artofcode LLC and Easy Software Products, all rights reserved.
This software comes with NO WARRANTY: see the file PUBLIC for details.
Error: /undefinedfilename in (menu,)
Operand stack:
Execution stack:
%interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push --nostringval-- --nostringval--
Dictionary stack:
--dict:1052/1417(ro)(G)-- --dict:0/20(G)-- --dict:68/200(L)--
Current allocation mode is local
Last OS error: 2
ESP Ghostscript 7.07.1: Unrecoverable error, exit code 1
root at desktop:/home/thephotoman #
Thanks!
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.289 / Virus Database: 265.5.0 - Release Date: 12/9/04
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/ubuntu-users/attachments/20041210/7945a4b2/attachment.html>
-------------- next part --------------
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.289 / Virus Database: 265.5.0 - Release Date: 12/9/04
More information about the ubuntu-users
mailing list