[Ubuntu-PT 8190] Re: Problemas no boot..
Georgy Zhukov
zhukov gawab.com
Segunda-Feira, 25 de Outubro de 2010 - 22:20:50 BST
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/297058
Ou firmware, ou opções de boot, ou tirar o CS da drive, está aí pela thread,
tenta.
Eu apostava mais em:
-> cabo
-> jumper da drive
Relevante:
https://bugs.launchpad.net/linux/+bug/75295/comments/97
http://e2e.ti.com/support/dsp/omap_applications_processors/f/42/t/31969.aspx
2010/10/25 Rui Oliveira <ruimail24 gmail.com>
> Em 25-10-2010 16:40, Luiz Gustavo Agostinho escreveu:
> > Já tentou atualizar o GRUB?
> >
> De facto não tentei... porque eu tenho o ubuntu 10.10, instalado de
> raiz, que presumo que tenha o ultimo GRUB... Está em dual boot com W.
> Vista...
> > Em 25 de outubro de 2010 12:17, Rui Oliveira<ruimail24 gmail.com>
> escreveu:
> >
> >
> >> Ola...
> >> Estou com um problema no boot.. O Pc liga mas demora uma eternidade... O
> >> Problema parece ser a minha drive de DVD..
> >> Uso Ubuntu 10.10 mas ja me aconteceu com todas as versões que por este
> >> pc passaram...
> >>
> >> Abaixo posto o erro que me da. É exatamente isto que me aparece no ecra
> >> de boot se o fizer sem "quiet splash". Negrito esta o que me parece ser
> >> o fulcro da questão, sublinhado esta tudo o relacionado...
> >>
> >> Agradecia ajuda.. Obrugado...
> >>
> >> *0.613251] ata1.00: ATAPI: TSSTcorp CDDVDW SN-S082H, SB01, max UDMA/33*
> >> [ 0.645264] ata1.00: configured for UDMA/33
> >> [ 0.694231] isapnp: No Plug& Play device found
> >> [ 0.916031] usb 1-6: new high speed USB device using ehci_hcd and
> >> address 3
> >> [ 1.164028] usb 1-7: new high speed USB device using ehci_hcd and
> >> address 4
> >> [ 1.940027] usb 3-2: new full speed USB device using ohci_hcd and
> >> address 2
> >> [ 2.456027] usb 3-4: new low speed USB device using ohci_hcd and
> >> address 3
> >> [ 21.856076] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
> >> frozen
> >> [ 21.856128] scsi 0:0:0:0: CDB: Inquiry: 12 00 00 00 60 00
> >> [ 21.856401] ata1.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0
> >> dma 96 in
> >> [ 21.856403] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask
> >> 0x4 (timeout)
> >> _[ 21.856507] ata1.00: status: { DRDY }
> >> *[ 26.896025] ata1: link is slow to respond, please be patient
> (ready=0)*
> >> [ 31.880025] ata1: device not ready (errno=-16), forcing hardreset
> >> [ 31.880075] ata1: soft resetting link
> >> [ 32.092276] ata1.00: configured for UDMA/33
> >> [ 32.092842] ata1: EH complete
> >> [ 52.832069] ata1.00: limiting speed to UDMA/25:PIO4
> >> [ 52.832115] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
> >> frozen
> >> [ 52.832164] scsi 0:0:0:0: CDB: Inquiry: 12 00 00 00 60 00
> >> [ 52.832436] ata1.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0
> >> dma 96 in
> >> [ 52.832437] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask
> >> 0x4 (timeout)
> >> [ 52.832542] ata1.00: status: { DRDY }
> >> [ 57.872025] ata1: link is slow to respond, please be patient
> (ready=0)
> >> [ 62.856027] ata1: device not ready (errno=-16), forcing hardreset
> >> [ 62.856076] ata1: soft resetting link
> >> [ 63.068276] ata1.00: configured for UDMA/25
> >> [ 63.070213] ata1: EH complete
> >> [ 83.872077] ata1.00: limiting speed to PIO4
> >> [ 83.872122] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
> >> frozen
> >> [ 83.872170] scsi 0:0:0:0: CDB: Inquiry: 12 00 00 00 60 00
> >> [ 83.872442] ata1.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0
> >> dma 96 in
> >> [ 83.872443] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask
> >> 0x4 (timeout)
> >> [ 83.872548] ata1.00: status: { DRDY }
> >> [ 88.912025] ata1: link is slow to respond, please be patient
> (ready=0)
> >> [ 93.896024] ata1: device not ready (errno=-16), forcing hardreset
> >> [ 93.896073] ata1: soft resetting link
> >> [ 94.108276] ata1.00: configured for PIO4
> >> [ 94.108707] ata1: EH complete_
> >> [ 94.110889] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SN-S082H
> >> SB01 PQ: 0 ANSI: 5
> >> [ 94.118096] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
> >> xa/form2 cdda tray
> >> [ 94.118158] Uniform CD-ROM driver Revision: 3.20
> >> [ 94.118324] sr 0:0:0:0: Attached scsi CD-ROM sr0
> >> [ 94.118383] sr 0:0:0:0: Attached scsi generic sg0 type 5
> >> [ 94.118837] ata2: port disabled. ignoring.
> >> [ 94.118864] Freeing unused kernel memory: 684k freed
> >> [ 94.119309] Write protecting the kernel text: 4932k
> >> [ 94.119399] Write protecting the kernel read-only data: 1976k
> >> [ 94.140060] udev[85]: starting version 163
> >> [ 94.239506] sata_sis 0000:00:05.0: version 1.0
> >> [ 94.239580] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low)
> >> -> IRQ 17
> >> [ 94.239639] sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680
> >> controller in PATA mode
> >> [ 94.243748] sdhci: Secure Digital Host Controller Interface driver
> >> [ 94.243819] sdhci: Copyright(c) Pierre Ossman
> >> [ 94.261115] scsi2 : sata_sis
> >> [ 94.275991] Initializing USB Mass Storage driver...
> >> [ 94.280674] scsi3 : sata_sis
> >> [ 94.281386] ata3: PATA max UDMA/133 cmd 0x10c8 ctl 0x10bc bmdma
> >> 0x10a0 irq 17
> >> [ 94.281436] ata4: PATA max UDMA/133 cmd 0x10c0 ctl 0x10b8 bmdma
> >> 0x10a8 irq 17
> >> [ 94.281518] sis190: sis190 Gigabit Ethernet driver 1.4 loaded
> >> [ 94.281583] alloc irq_desc for 19 on node -1
> >> [ 94.281585] alloc kstat_irqs on node -1
> >> [ 94.281595] sis190 0000:00:04.0: PCI INT A -> GSI 19 (level, low) ->
> >> IRQ 19
> >> [ 94.281653] sis190 0000:00:04.0: setting latency timer to 64
> >> [ 94.281678] sis190: 0000:00:04.0: Read MAC address from EEPROM
> >> [ 94.302559] scsi4 : usb-storage 1-6:1.0
> >> [ 94.305058] scsi5 : usb-storage 3-2:1.0
> >> [ 94.305299] usbcore: registered new interface driver usb-storage
> >> [ 94.305348] USB Mass Storage support registered.
> >> [ 94.368027] sis190: 0000:00:04.0: Realtek PHY RTL8201 transceiver at
> >> address 1
> >>
> >> --
> >> ubuntu-pt mailing list
> >> ubuntu-pt lists.ubuntu.com
> >> https://lists.ubuntu.com/mailman/listinfo/ubuntu-pt
> >>
> >>
> >
> >
> >
>
>
> --
> ubuntu-pt mailing list
> ubuntu-pt lists.ubuntu.com
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-pt
>
Mais informações acerca da lista ubuntu-pt