[Ubuntu-PT 8191] Problemas no boot..
Wendel Henrique
wendel086 gmail.com
Segunda-Feira, 25 de Outubro de 2010 - 22:31:38 BST
Já conferiu a ordem do boot na BIOS?
Pode ser que o PC esteja dando boot em outro dispositivo antes do HD.
Em 25 de outubro de 2010 19:20, Georgy Zhukov <zhukov gawab.com> escreveu:
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/297058
>
> Ou firmware, ou opções de boot, ou tirar o CS da drive, está aí pela
> thread,
> tenta.
>
> Eu apostava mais em:
>
> -> cabo
> -> jumper da drive
>
> Relevante:
> https://bugs.launchpad.net/linux/+bug/75295/comments/97
>
> http://e2e.ti.com/support/dsp/omap_applications_processors/f/42/t/31969.aspx
>
> 2010/10/25 Rui Oliveira <ruimail24 gmail.com>
>
> > Em 25-10-2010 16:40, Luiz Gustavo Agostinho escreveu:
> > > Já tentou atualizar o GRUB?
> > >
> > De facto não tentei... porque eu tenho o ubuntu 10.10, instalado de
> > raiz, que presumo que tenha o ultimo GRUB... Está em dual boot com W.
> > Vista...
> > > Em 25 de outubro de 2010 12:17, Rui Oliveira<ruimail24 gmail.com>
> > escreveu:
> > >
> > >
> > >> Ola...
> > >> Estou com um problema no boot.. O Pc liga mas demora uma eternidade...
> O
> > >> Problema parece ser a minha drive de DVD..
> > >> Uso Ubuntu 10.10 mas ja me aconteceu com todas as versões que por este
> > >> pc passaram...
> > >>
> > >> Abaixo posto o erro que me da. É exatamente isto que me aparece no
> ecra
> > >> de boot se o fizer sem "quiet splash". Negrito esta o que me parece
> ser
> > >> o fulcro da questão, sublinhado esta tudo o relacionado...
> > >>
> > >> Agradecia ajuda.. Obrugado...
> > >>
> > >> *0.613251] ata1.00: ATAPI: TSSTcorp CDDVDW SN-S082H, SB01, max
> UDMA/33*
> > >> [ 0.645264] ata1.00: configured for UDMA/33
> > >> [ 0.694231] isapnp: No Plug& Play device found
> > >> [ 0.916031] usb 1-6: new high speed USB device using ehci_hcd and
> > >> address 3
> > >> [ 1.164028] usb 1-7: new high speed USB device using ehci_hcd and
> > >> address 4
> > >> [ 1.940027] usb 3-2: new full speed USB device using ohci_hcd and
> > >> address 2
> > >> [ 2.456027] usb 3-4: new low speed USB device using ohci_hcd and
> > >> address 3
> > >> [ 21.856076] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action
> 0x6
> > >> frozen
> > >> [ 21.856128] scsi 0:0:0:0: CDB: Inquiry: 12 00 00 00 60 00
> > >> [ 21.856401] ata1.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0
> > >> dma 96 in
> > >> [ 21.856403] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask
> > >> 0x4 (timeout)
> > >> _[ 21.856507] ata1.00: status: { DRDY }
> > >> *[ 26.896025] ata1: link is slow to respond, please be patient
> > (ready=0)*
> > >> [ 31.880025] ata1: device not ready (errno=-16), forcing hardreset
> > >> [ 31.880075] ata1: soft resetting link
> > >> [ 32.092276] ata1.00: configured for UDMA/33
> > >> [ 32.092842] ata1: EH complete
> > >> [ 52.832069] ata1.00: limiting speed to UDMA/25:PIO4
> > >> [ 52.832115] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action
> 0x6
> > >> frozen
> > >> [ 52.832164] scsi 0:0:0:0: CDB: Inquiry: 12 00 00 00 60 00
> > >> [ 52.832436] ata1.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0
> > >> dma 96 in
> > >> [ 52.832437] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask
> > >> 0x4 (timeout)
> > >> [ 52.832542] ata1.00: status: { DRDY }
> > >> [ 57.872025] ata1: link is slow to respond, please be patient
> > (ready=0)
> > >> [ 62.856027] ata1: device not ready (errno=-16), forcing hardreset
> > >> [ 62.856076] ata1: soft resetting link
> > >> [ 63.068276] ata1.00: configured for UDMA/25
> > >> [ 63.070213] ata1: EH complete
> > >> [ 83.872077] ata1.00: limiting speed to PIO4
> > >> [ 83.872122] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action
> 0x6
> > >> frozen
> > >> [ 83.872170] scsi 0:0:0:0: CDB: Inquiry: 12 00 00 00 60 00
> > >> [ 83.872442] ata1.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0
> > >> dma 96 in
> > >> [ 83.872443] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask
> > >> 0x4 (timeout)
> > >> [ 83.872548] ata1.00: status: { DRDY }
> > >> [ 88.912025] ata1: link is slow to respond, please be patient
> > (ready=0)
> > >> [ 93.896024] ata1: device not ready (errno=-16), forcing hardreset
> > >> [ 93.896073] ata1: soft resetting link
> > >> [ 94.108276] ata1.00: configured for PIO4
> > >> [ 94.108707] ata1: EH complete_
> > >> [ 94.110889] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW
> SN-S082H
> > >> SB01 PQ: 0 ANSI: 5
> > >> [ 94.118096] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
> > >> xa/form2 cdda tray
> > >> [ 94.118158] Uniform CD-ROM driver Revision: 3.20
> > >> [ 94.118324] sr 0:0:0:0: Attached scsi CD-ROM sr0
> > >> [ 94.118383] sr 0:0:0:0: Attached scsi generic sg0 type 5
> > >> [ 94.118837] ata2: port disabled. ignoring.
> > >> [ 94.118864] Freeing unused kernel memory: 684k freed
> > >> [ 94.119309] Write protecting the kernel text: 4932k
> > >> [ 94.119399] Write protecting the kernel read-only data: 1976k
> > >> [ 94.140060] udev[85]: starting version 163
> > >> [ 94.239506] sata_sis 0000:00:05.0: version 1.0
> > >> [ 94.239580] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level,
> low)
> > >> -> IRQ 17
> > >> [ 94.239639] sata_sis 0000:00:05.0: Detected SiS
> 1183/966/966L/968/680
> > >> controller in PATA mode
> > >> [ 94.243748] sdhci: Secure Digital Host Controller Interface driver
> > >> [ 94.243819] sdhci: Copyright(c) Pierre Ossman
> > >> [ 94.261115] scsi2 : sata_sis
> > >> [ 94.275991] Initializing USB Mass Storage driver...
> > >> [ 94.280674] scsi3 : sata_sis
> > >> [ 94.281386] ata3: PATA max UDMA/133 cmd 0x10c8 ctl 0x10bc bmdma
> > >> 0x10a0 irq 17
> > >> [ 94.281436] ata4: PATA max UDMA/133 cmd 0x10c0 ctl 0x10b8 bmdma
> > >> 0x10a8 irq 17
> > >> [ 94.281518] sis190: sis190 Gigabit Ethernet driver 1.4 loaded
> > >> [ 94.281583] alloc irq_desc for 19 on node -1
> > >> [ 94.281585] alloc kstat_irqs on node -1
> > >> [ 94.281595] sis190 0000:00:04.0: PCI INT A -> GSI 19 (level, low)
> ->
> > >> IRQ 19
> > >> [ 94.281653] sis190 0000:00:04.0: setting latency timer to 64
> > >> [ 94.281678] sis190: 0000:00:04.0: Read MAC address from EEPROM
> > >> [ 94.302559] scsi4 : usb-storage 1-6:1.0
> > >> [ 94.305058] scsi5 : usb-storage 3-2:1.0
> > >> [ 94.305299] usbcore: registered new interface driver usb-storage
> > >> [ 94.305348] USB Mass Storage support registered.
> > >> [ 94.368027] sis190: 0000:00:04.0: Realtek PHY RTL8201 transceiver
> at
> > >> address 1
> > >>
> > >> --
> > >> ubuntu-pt mailing list
> > >> ubuntu-pt lists.ubuntu.com
> > >> https://lists.ubuntu.com/mailman/listinfo/ubuntu-pt
> > >>
> > >>
> > >
> > >
> > >
> >
> >
> > --
> > ubuntu-pt mailing list
> > ubuntu-pt lists.ubuntu.com
> > https://lists.ubuntu.com/mailman/listinfo/ubuntu-pt
> >
> --
> ubuntu-pt mailing list
> ubuntu-pt lists.ubuntu.com
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-pt
>
--
Prodata Informática e Cadastro LTDA.
>-------------Contatos--------------->
33 - 3322-3092 Minha mesa.
33 - 3322-3001 Recepção
33 - 3322-3082 Mesa do Lado
Msn: Wendel086 hotmail.com
>---------------------------------------->
Wendel Henrique Ferreira.
Obrigado.
"Amigo é igual a um psicólogo porém não cobra nada pela sua consulta e ainda
fica feliz por você confiar nele." (Wendel
H.Ferreira<http://www.pensador.info/autor/Wendel_Henrique_Ferreira/>
)
Mais informações acerca da lista ubuntu-pt