[Ubuntu-PT 8189] Re: Problemas no boot..
Rui Oliveira
ruimail24 gmail.com
Segunda-Feira, 25 de Outubro de 2010 - 19:45:45 BST
Em 25-10-2010 16:40, Luiz Gustavo Agostinho escreveu:
> Já tentou atualizar o GRUB?
>
De facto não tentei... porque eu tenho o ubuntu 10.10, instalado de
raiz, que presumo que tenha o ultimo GRUB... Está em dual boot com W.
Vista...
> Em 25 de outubro de 2010 12:17, Rui Oliveira<ruimail24 gmail.com> escreveu:
>
>
>> Ola...
>> Estou com um problema no boot.. O Pc liga mas demora uma eternidade... O
>> Problema parece ser a minha drive de DVD..
>> Uso Ubuntu 10.10 mas ja me aconteceu com todas as versões que por este
>> pc passaram...
>>
>> Abaixo posto o erro que me da. É exatamente isto que me aparece no ecra
>> de boot se o fizer sem "quiet splash". Negrito esta o que me parece ser
>> o fulcro da questão, sublinhado esta tudo o relacionado...
>>
>> Agradecia ajuda.. Obrugado...
>>
>> *0.613251] ata1.00: ATAPI: TSSTcorp CDDVDW SN-S082H, SB01, max UDMA/33*
>> [ 0.645264] ata1.00: configured for UDMA/33
>> [ 0.694231] isapnp: No Plug& Play device found
>> [ 0.916031] usb 1-6: new high speed USB device using ehci_hcd and
>> address 3
>> [ 1.164028] usb 1-7: new high speed USB device using ehci_hcd and
>> address 4
>> [ 1.940027] usb 3-2: new full speed USB device using ohci_hcd and
>> address 2
>> [ 2.456027] usb 3-4: new low speed USB device using ohci_hcd and
>> address 3
>> [ 21.856076] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
>> frozen
>> [ 21.856128] scsi 0:0:0:0: CDB: Inquiry: 12 00 00 00 60 00
>> [ 21.856401] ata1.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0
>> dma 96 in
>> [ 21.856403] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask
>> 0x4 (timeout)
>> _[ 21.856507] ata1.00: status: { DRDY }
>> *[ 26.896025] ata1: link is slow to respond, please be patient (ready=0)*
>> [ 31.880025] ata1: device not ready (errno=-16), forcing hardreset
>> [ 31.880075] ata1: soft resetting link
>> [ 32.092276] ata1.00: configured for UDMA/33
>> [ 32.092842] ata1: EH complete
>> [ 52.832069] ata1.00: limiting speed to UDMA/25:PIO4
>> [ 52.832115] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
>> frozen
>> [ 52.832164] scsi 0:0:0:0: CDB: Inquiry: 12 00 00 00 60 00
>> [ 52.832436] ata1.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0
>> dma 96 in
>> [ 52.832437] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask
>> 0x4 (timeout)
>> [ 52.832542] ata1.00: status: { DRDY }
>> [ 57.872025] ata1: link is slow to respond, please be patient (ready=0)
>> [ 62.856027] ata1: device not ready (errno=-16), forcing hardreset
>> [ 62.856076] ata1: soft resetting link
>> [ 63.068276] ata1.00: configured for UDMA/25
>> [ 63.070213] ata1: EH complete
>> [ 83.872077] ata1.00: limiting speed to PIO4
>> [ 83.872122] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
>> frozen
>> [ 83.872170] scsi 0:0:0:0: CDB: Inquiry: 12 00 00 00 60 00
>> [ 83.872442] ata1.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0
>> dma 96 in
>> [ 83.872443] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask
>> 0x4 (timeout)
>> [ 83.872548] ata1.00: status: { DRDY }
>> [ 88.912025] ata1: link is slow to respond, please be patient (ready=0)
>> [ 93.896024] ata1: device not ready (errno=-16), forcing hardreset
>> [ 93.896073] ata1: soft resetting link
>> [ 94.108276] ata1.00: configured for PIO4
>> [ 94.108707] ata1: EH complete_
>> [ 94.110889] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SN-S082H
>> SB01 PQ: 0 ANSI: 5
>> [ 94.118096] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
>> xa/form2 cdda tray
>> [ 94.118158] Uniform CD-ROM driver Revision: 3.20
>> [ 94.118324] sr 0:0:0:0: Attached scsi CD-ROM sr0
>> [ 94.118383] sr 0:0:0:0: Attached scsi generic sg0 type 5
>> [ 94.118837] ata2: port disabled. ignoring.
>> [ 94.118864] Freeing unused kernel memory: 684k freed
>> [ 94.119309] Write protecting the kernel text: 4932k
>> [ 94.119399] Write protecting the kernel read-only data: 1976k
>> [ 94.140060] udev[85]: starting version 163
>> [ 94.239506] sata_sis 0000:00:05.0: version 1.0
>> [ 94.239580] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low)
>> -> IRQ 17
>> [ 94.239639] sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680
>> controller in PATA mode
>> [ 94.243748] sdhci: Secure Digital Host Controller Interface driver
>> [ 94.243819] sdhci: Copyright(c) Pierre Ossman
>> [ 94.261115] scsi2 : sata_sis
>> [ 94.275991] Initializing USB Mass Storage driver...
>> [ 94.280674] scsi3 : sata_sis
>> [ 94.281386] ata3: PATA max UDMA/133 cmd 0x10c8 ctl 0x10bc bmdma
>> 0x10a0 irq 17
>> [ 94.281436] ata4: PATA max UDMA/133 cmd 0x10c0 ctl 0x10b8 bmdma
>> 0x10a8 irq 17
>> [ 94.281518] sis190: sis190 Gigabit Ethernet driver 1.4 loaded
>> [ 94.281583] alloc irq_desc for 19 on node -1
>> [ 94.281585] alloc kstat_irqs on node -1
>> [ 94.281595] sis190 0000:00:04.0: PCI INT A -> GSI 19 (level, low) ->
>> IRQ 19
>> [ 94.281653] sis190 0000:00:04.0: setting latency timer to 64
>> [ 94.281678] sis190: 0000:00:04.0: Read MAC address from EEPROM
>> [ 94.302559] scsi4 : usb-storage 1-6:1.0
>> [ 94.305058] scsi5 : usb-storage 3-2:1.0
>> [ 94.305299] usbcore: registered new interface driver usb-storage
>> [ 94.305348] USB Mass Storage support registered.
>> [ 94.368027] sis190: 0000:00:04.0: Realtek PHY RTL8201 transceiver at
>> address 1
>>
>> --
>> ubuntu-pt mailing list
>> ubuntu-pt lists.ubuntu.com
>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-pt
>>
>>
>
>
>
Mais informações acerca da lista ubuntu-pt