[Bug 251617] Re: Firefox opens without window decoration with Compiz

spammesilly spammesilly at gmail.com
Wed Aug 20 12:30:39 UTC 2008


Please do not close this ticket! I can reproduce the issue everytime
with Firefox. I just need to know what information you'll need about my
system. I'm running Hardy 8.04. Using Compiz and Nvidia driver. I can
reproduce the issue with Gnome Desktop and XFCE. My display also flashes
a bit when opening firefox. Here's a dmesg output:

dg at GX280:~$ uname -a
Linux GX280 2.6.24-19-generic #1 SMP Fri Jul 11 23:41:49 UTC 2008 i686 GNU/Linux
dg at GX280:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.24-19-generic (buildd at terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Jul 11 23:41:49 UTC 2008 (Ubuntu 2.6.24-19.36-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000005fe88c00 (usable)
[    0.000000]  BIOS-e820: 000000005fe88c00 - 000000005fe8ac00 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000005fe8ac00 - 000000005fe8cc00 (ACPI data)
[    0.000000]  BIOS-e820: 000000005fe8cc00 - 0000000060000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[    0.000000] 638MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000fe710
[    0.000000] Entering add_active_range(0, 0, 392840) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   392840
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   392840
[    0.000000] On node 0 totalpages: 392840
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1277 pages used for memmap
[    0.000000]   HighMem zone: 162187 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xC00FEC00 checksum 0
[    0.000000] ACPI: RSDP 000FEC00, 0014 (r0 DELL  )
[    0.000000] ACPI: RSDT 000FCBFD, 0040 (r1 DELL    GX280          6 ASL        61)
[    0.000000] ACPI: FACP 000FCC3D, 0074 (r1 DELL    GX280          6 ASL        61)
[    0.000000] ACPI: DSDT FFFCEE87, 3022 (r1   DELL    dt_ex     1000 MSFT  100000D)
[    0.000000] ACPI: FACS 5FE88C00, 0040
[    0.000000] ACPI: SSDT FFFD20A0, 0096 (r1   DELL    st_ex     1000 MSFT  100000D)
[    0.000000] ACPI: APIC 000FCCB1, 0072 (r1 DELL    GX280          6 ASL        61)
[    0.000000] ACPI: BOOT 000FCD23, 0028 (r1 DELL    GX280          6 ASL        61)
[    0.000000] ACPI: ASF! 000FCD4B, 0067 (r16 DELL    GX280          6 ASL        61)
[    0.000000] ACPI: MCFG 000FCDB2, 003E (r1 DELL    GX280          6 ASL        61)
[    0.000000] ACPI: HPET 000FCDF0, 0038 (r1 DELL    GX280          6 ASL        61)
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:4 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 68000000 (gap: 60000000:80000000)
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 389771
[    0.000000] Kernel command line: root=UUID=bf995d3d-fc42-45ba-ab7c-e54bb8d054c9 ro quiet splash
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 2793.129 MHz processor.
[   14.409416] Console: colour VGA+ 80x25
[   14.409420] console [tty0] enabled
[   14.409705] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   14.410040] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   14.483298] Memory: 1545652k/1571360k available (2177k kernel code, 24548k reserved, 1006k data, 368k init, 653856k highmem)
[   14.483307] virtual kernel memory layout:
[   14.483308]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   14.483309]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   14.483310]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   14.483311]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   14.483312]       .init : 0xc0421000 - 0xc047d000   ( 368 kB)
[   14.483313]       .data : 0xc0320474 - 0xc041bdc4   (1006 kB)
[   14.483314]       .text : 0xc0100000 - 0xc0320474   (2177 kB)
[   14.483318] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   14.483357] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   14.483454] hpet clockevent registered
[   14.563324] Calibrating delay using timer specific routine.. 5591.37 BogoMIPS (lpj=11182751)
[   14.563347] Security Framework initialized
[   14.563352] SELinux:  Disabled at boot.
[   14.563366] AppArmor: AppArmor initialized
[   14.563371] Failure registering capabilities with primary security module.
[   14.563380] Mount-cache hash table entries: 512
[   14.563503] Initializing cgroup subsys ns
[   14.563508] Initializing cgroup subsys cpuacct
[   14.563521] CPU: After generic identify, caps: bfebfbff 00100000 00000000 00000000 0000441d 00000000 00000000 00000000
[   14.563531] monitor/mwait feature present.
[   14.563533] using mwait in idle threads.
[   14.563538] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   14.563540] CPU: L2 cache: 1024K
[   14.563543] CPU: Physical Processor ID: 0
[   14.563545] CPU: After all inits, caps: bfebfbff 00100000 00000000 0000b180 0000441d 00000000 00000000 00000000
[   14.563556] Compat vDSO mapped to ffffe000.
[   14.563572] Checking 'hlt' instruction... OK.
[   14.579751] SMP alternatives: switching to UP code
[   14.581576] Freeing SMP alternatives: 11k freed
[   14.581701] Early unpacking initramfs... done
[   14.894785] ACPI: Core revision 20070126
[   14.911624] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   14.943287] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01
[   14.943327] Total of 1 processors activated (5591.37 BogoMIPS).
[   14.943473] ENABLING IO-APIC IRQs
[   14.943649] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   15.090474] Brought up 1 CPUs
[   15.090497] CPU0 attaching sched-domain:
[   15.090501]  domain 0: span 01
[   15.090503]   groups: 01
[   15.090683] net_namespace: 64 bytes
[   15.090697] Booting paravirtualized kernel on bare hardware
[   15.091307] Time: 12:16:59  Date: 08/20/08
[   15.091330] NET: Registered protocol family 16
[   15.091584] EISA bus registered
[   15.091590] ACPI: bus type pci registered
[   15.091743] PCI: PCI BIOS revision 2.10 entry at 0xfb28d, last bus=4
[   15.091746] PCI: Using configuration type 1
[   15.091770] Setting up standard PCI resources
[   15.093466] ACPI: EC: Look up EC in DSDT
[   15.118649] ACPI: Interpreter enabled
[   15.118653] ACPI: (supports S0 S1 S4 S5)
[   15.118669] ACPI: Using IOAPIC for interrupt routing
[   15.155421] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   15.156026] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[   15.156031] PCI quirk: region 0880-08bf claimed by ICH6 GPIO
[   15.156751] PCI: Transparent bridge - 0000:00:1e.0
[   15.156785] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   15.157251] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[   15.157810] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[   15.158090] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
[   15.158382] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
[   15.424596] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[   15.424932] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[   15.425266] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
[   15.425594] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[   15.425936] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[   15.426271] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[   15.426601] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[   15.426934] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[   15.427188] Linux Plug and Play Support v0.97 (c) Adam Belay
[   15.427227] pnp: PnP ACPI init
[   15.427235] ACPI: bus type pnp registered
[   15.453953] pnpacpi: exceeded the max number of IO resources: 40 
[   15.454166] pnp: PnP ACPI: found 12 devices
[   15.454169] ACPI: ACPI bus type pnp unregistered
[   15.454173] PnPBIOS: Disabled by ACPI PNP
[   15.454456] PCI: Using ACPI for IRQ routing
[   15.454459] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   15.481762] NET: Registered protocol family 8
[   15.481765] NET: Registered protocol family 20
[   15.481806] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   15.481811] hpet0: 3 64-bit timers, 14318180 Hz
[   15.482848] AppArmor: AppArmor Filesystem Enabled
[   15.485748] Time: tsc clocksource has been installed.
[   15.485764] Switched to high resolution mode on CPU 0
[   15.493732] system 00:01: ioport range 0x800-0x85f has been reserved
[   15.493735] system 00:01: ioport range 0xc00-0xc7f has been reserved
[   15.493738] system 00:01: ioport range 0x860-0x8ff could not be reserved
[   15.493749] system 00:09: iomem range 0x0-0x9ffff could not be reserved
[   15.493752] system 00:09: iomem range 0x100000-0xffffff could not be reserved
[   15.493755] system 00:09: iomem range 0x1000000-0x5fe88bff could not be reserved
[   15.493758] system 00:09: iomem range 0xc0000-0xfffff could not be reserved
[   15.493761] system 00:09: iomem range 0xfec00000-0xfecfffff could not be reserved
[   15.493764] system 00:09: iomem range 0xfee00000-0xfeefffff could not be reserved
[   15.493767] system 00:09: iomem range 0xfed20000-0xfed9ffff could not be reserved
[   15.493769] system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
[   15.493772] system 00:09: iomem range 0xffc00000-0xffffffff could not be reserved
[   15.493778] system 00:0a: ioport range 0x100-0x1fe could not be reserved
[   15.493781] system 00:0a: ioport range 0x200-0x277 has been reserved
[   15.493783] system 00:0a: ioport range 0x280-0x2e7 has been reserved
[   15.493786] system 00:0a: ioport range 0x2f0-0x2f7 has been reserved
[   15.493788] system 00:0a: ioport range 0x300-0x377 could not be reserved
[   15.493791] system 00:0a: ioport range 0x380-0x3bb has been reserved
[   15.493793] system 00:0a: ioport range 0x3c0-0x3e7 could not be reserved
[   15.493796] system 00:0a: ioport range 0x3f6-0x3f7 could not be reserved
[   15.493799] system 00:0a: ioport range 0x400-0x4cf has been reserved
[   15.493801] system 00:0a: ioport range 0x4d2-0x57f has been reserved
[   15.493803] system 00:0a: ioport range 0x580-0x677 has been reserved
[   15.493806] system 00:0a: ioport range 0x680-0x777 has been reserved
[   15.493808] system 00:0a: ioport range 0x780-0x7bb has been reserved
[   15.493811] system 00:0a: ioport range 0x7c0-0x7ff has been reserved
[   15.493813] system 00:0a: ioport range 0x8e0-0x8ff has been reserved
[   15.493815] system 00:0a: ioport range 0x900-0x9fe has been reserved
[   15.493818] system 00:0a: ioport range 0xa00-0xafe has been reserved
[   15.493820] system 00:0a: ioport range 0xb00-0xbfe has been reserved
[   15.493823] system 00:0a: ioport range 0xc80-0xcaf has been reserved
[   15.493825] system 00:0a: ioport range 0xcb0-0xcbf has been reserved
[   15.493828] system 00:0a: ioport range 0xcc0-0xcf7 has been reserved
[   15.493830] system 00:0a: ioport range 0xd00-0xdfe has been reserved
[   15.493832] system 00:0a: ioport range 0xe00-0xefe has been reserved
[   15.493835] system 00:0a: ioport range 0xf00-0xffe has been reserved
[   15.493837] system 00:0a: ioport range 0x2000-0x20fe has been reserved
[   15.493840] system 00:0a: ioport range 0x2100-0x21fe has been reserved
[   15.493842] system 00:0a: ioport range 0x2200-0x22fe has been reserved
[   15.493845] system 00:0a: ioport range 0x2300-0x23fe has been reserved
[   15.493847] system 00:0a: ioport range 0x2400-0x24fe has been reserved
[   15.493850] system 00:0a: ioport range 0x2500-0x25fe has been reserved
[   15.493852] system 00:0a: ioport range 0x2600-0x26fe has been reserved
[   15.493855] system 00:0a: ioport range 0x2700-0x27fe has been reserved
[   15.493858] system 00:0a: ioport range 0x2800-0x28fe has been reserved
[   15.493860] system 00:0a: ioport range 0x2900-0x29fe has been reserved
[   15.493863] system 00:0a: ioport range 0x2a00-0x2afe has been reserved
[   15.493865] system 00:0a: ioport range 0x2b00-0x2bfe has been reserved
[   15.493868] system 00:0a: ioport range 0x2c00-0x2cfe has been reserved
[   15.493870] system 00:0a: ioport range 0x2d00-0x2dfe has been reserved
[   15.493873] system 00:0a: ioport range 0x2e00-0x2efe has been reserved
[   15.493875] system 00:0a: ioport range 0x2f00-0x2ffe has been reserved
[   15.493878] system 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved
[   15.493881] system 00:0a: iomem range 0xfeda0000-0xfedacfff has been reserved
[   15.524341] PCI: Bridge: 0000:00:01.0
[   15.524343]   IO window: disabled.
[   15.524347]   MEM window: dd000000-dfefffff
[   15.524350]   PREFETCH window: c0000000-cfffffff
[   15.524354] PCI: Bridge: 0000:00:1c.0
[   15.524356]   IO window: disabled.
[   15.524361]   MEM window: dcf00000-dcffffff
[   15.524364]   PREFETCH window: disabled.
[   15.524369] PCI: Bridge: 0000:00:1c.1
[   15.524370]   IO window: disabled.
[   15.524375]   MEM window: dce00000-dcefffff
[   15.524379]   PREFETCH window: disabled.
[   15.524383] PCI: Bridge: 0000:00:1e.0
[   15.524386]   IO window: d000-dfff
[   15.524391]   MEM window: dcd00000-dcdfffff
[   15.524395]   PREFETCH window: d0000000-d00fffff
[   15.524415] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   15.524421] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   15.524440] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[   15.524447] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   15.524466] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[   15.524471] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   15.524482] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   15.524493] NET: Registered protocol family 2
[   15.561644] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   15.561940] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   15.562560] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   15.562868] TCP: Hash tables configured (established 131072 bind 65536)
[   15.562870] TCP reno registered
[   15.573713] checking if image is initramfs... it is
[   16.182960] Freeing initrd memory: 7307k freed
[   16.183102] Simple Boot Flag value 0x87 read from CMOS RAM was invalid
[   16.183105] Simple Boot Flag at 0x7a set to 0x1
[   16.183561] audit: initializing netlink socket (disabled)
[   16.183574] audit(1219234619.592:1): initialized
[   16.183763] highmem bounce pool size: 64 pages
[   16.185981] VFS: Disk quotas dquot_6.5.1
[   16.186063] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   16.186199] io scheduler noop registered
[   16.186202] io scheduler anticipatory registered
[   16.186204] io scheduler deadline registered
[   16.186216] io scheduler cfq registered (default)
[   16.186311] Boot video device is 0000:01:00.0
[   16.186433] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   16.186474] assign_interrupt_mode Found MSI capability
[   16.186509] Allocate Port Service[0000:00:01.0:pcie00]
[   16.186600] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   16.186644] assign_interrupt_mode Found MSI capability
[   16.186680] Allocate Port Service[0000:00:1c.0:pcie00]
[   16.186722] Allocate Port Service[0000:00:1c.0:pcie02]
[   16.186816] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   16.186858] assign_interrupt_mode Found MSI capability
[   16.186894] Allocate Port Service[0000:00:1c.1:pcie00]
[   16.187170] isapnp: Scanning for PnP cards...
[   16.538579] isapnp: No Plug & Play device found
[   16.574404] Real Time Clock Driver v1.12ac
[   16.574626] hpet_resources: 0xfed00000 is busy
[   16.574642] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   16.574776] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   16.575573] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   16.576494] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   16.576573] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   16.576747] PNP: No PS/2 controller found. Probing ports directly.
[   16.579352] serio: i8042 KBD port at 0x60,0x64 irq 1
[   16.579357] serio: i8042 AUX port at 0x60,0x64 irq 12
[   16.580056] mice: PS/2 mouse device common for all mice
[   16.580199] EISA: Probing bus 0 at eisa.0
[   16.580203] EISA: Cannot allocate resource for mainboard
[   16.580209] Cannot allocate resource for EISA slot 2
[   16.580230] EISA: Detected 0 cards.
[   16.580233] cpuidle: using governor ladder
[   16.580235] cpuidle: using governor menu
[   16.580314] NET: Registered protocol family 1
[   16.580342] Using IPI No-Shortcut mode
[   16.580371] registered taskstats version 1
[   16.580463]   Magic number: 4:506:279
[   16.580479]   hash matches device ttyy7
[   16.580485]   hash matches device ttyva
[   16.580534]   hash matches device tty16
[   16.580551] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   16.580553] EDD information not available.
[   16.580735] Freeing unused kernel memory: 368k freed
[   17.826176] fuse init (API version 7.9)
[   17.852153] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   18.361096] tg3.c:v3.86 (November 9, 2007)
[   18.361120] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   18.361131] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   18.385272] eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:11:43:a5:53:6f
[   18.385281] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[   18.385284] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[   18.431477] usbcore: registered new interface driver usbfs
[   18.431505] usbcore: registered new interface driver hub
[   18.440661] usbcore: registered new device driver usb
[   18.451238] USB Universal Host Controller Interface driver v3.0
[   18.451297] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 18
[   18.451309] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   18.451313] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   18.451512] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   18.451541] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000ff80
[   18.451682] usb usb1: configuration #1 chosen from 1 choice
[   18.451717] hub 1-0:1.0: USB hub found
[   18.451724] hub 1-0:1.0: 2 ports detected
[   18.508050] 8139too Fast Ethernet driver 0.9.28
[   18.549942] SCSI subsystem initialized
[   18.558242] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 19
[   18.558255] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   18.558260] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   18.558286] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   18.558314] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60
[   18.558430] usb usb2: configuration #1 chosen from 1 choice
[   18.558457] hub 2-0:1.0: USB hub found
[   18.558465] hub 2-0:1.0: 2 ports detected
[   18.578109] libata version 3.00 loaded.
[   18.656378] Floppy drive(s): fd0 is 1.44M
[   18.660325] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[   18.660338] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   18.660342] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   18.660370] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   18.660398] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000ff40
[   18.660514] usb usb3: configuration #1 chosen from 1 choice
[   18.660542] hub 3-0:1.0: USB hub found
[   18.660549] hub 3-0:1.0: 2 ports detected
[   18.678339] FDC 0 is a post-1991 82077
[   18.764156] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 21
[   18.764170] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   18.764174] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   18.764202] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   18.764231] uhci_hcd 0000:00:1d.3: irq 21, io base 0x0000ff20
[   18.764356] usb usb4: configuration #1 chosen from 1 choice
[   18.764385] hub 4-0:1.0: USB hub found
[   18.764391] hub 4-0:1.0: 2 ports detected
[   18.796001] usb 1-1: new low speed USB device using uhci_hcd and address 2
[   18.868078] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 18
[   18.868094] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   18.868098] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   18.868125] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   18.872039] ehci_hcd 0000:00:1d.7: debug port 1
[   18.872045] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[   18.872052] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xffa80800
[   18.923792] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   18.923918] usb usb5: configuration #1 chosen from 1 choice
[   18.923946] hub 5-0:1.0: USB hub found
[   18.923953] hub 5-0:1.0: 8 ports detected
[   19.027789] ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 17 (level, low) -> IRQ 17
[   19.028550] eth1: RealTek RTL8139 at 0xdc00, 00:c0:26:62:93:53, IRQ 17
[   19.028554] eth1:  Identified 8139 chip type 'RTL-8139C'
[   19.030752] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 22
[   19.030787] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   19.030799] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[   19.031989] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   19.037191] ata_piix 0000:00:1f.2: version 2.12
[   19.037197] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[   19.191353] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 22
[   19.191392] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   19.193086] scsi0 : ata_piix
[   19.193777] scsi1 : ata_piix
[   19.193815] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[   19.193818] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[   19.327068] usb 1-1: device not accepting address 2, error -71
[   19.363904] ata1.00: ATA-7: WDC WD740ADFD-00NLR5, 21.07QR5, max UDMA/133
[   19.363908] ata1.00: 145226112 sectors, multi 8: LBA48 NCQ (depth 0/32)
[   19.404443] ata1.01: ATA-7: MAXTOR STM380215AS, 3.AAD, max UDMA/133
[   19.404446] ata1.01: 156301488 sectors, multi 8: LBA48 NCQ (depth 0/32)
[   19.419799] ata1.00: configured for UDMA/133
[   19.479291] ata1.01: configured for UDMA/133
[   19.798579] ata2.00: ATAPI: HL-DT-ST GCE-8483B, B105, max UDMA/33
[   19.970222] ata2.00: configured for UDMA/33
[   19.970339] scsi 0:0:0:0: Direct-Access     ATA      WDC WD740ADFD-00 21.0 PQ: 0 ANSI: 5
[   19.970730] scsi 0:0:1:0: Direct-Access     ATA      MAXTOR STM380215 3.AA PQ: 0 ANSI: 5
[   19.971159] scsi 1:0:0:0: CD-ROM            HL-DT-ST CD-RW GCE-8483B  B105 PQ: 0 ANSI: 5
[   19.985515] Driver 'sd' needs updating - please use bus_type methods
[   19.985602] sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB)
[   19.985618] sd 0:0:0:0: [sda] Write Protect is off
[   19.985621] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   19.985646] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   19.985699] sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB)
[   19.985713] sd 0:0:0:0: [sda] Write Protect is off
[   19.985716] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   19.985739] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   19.985743]  sda: sda1 sda2 <<4>Driver 'sr' needs updating - please use bus_type methods
[   20.000248]  sda5 >
[   20.000350] sd 0:0:0:0: [sda] Attached SCSI disk
[   20.000420] sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[   20.000437] sd 0:0:1:0: [sdb] Write Protect is off
[   20.000440] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[   20.000464] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   20.000516] sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[   20.000530] sd 0:0:1:0: [sdb] Write Protect is off
[   20.000533] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[   20.000555] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   20.000560]  sdb: sdb1 sdb2
[   20.044417] sd 0:0:1:0: [sdb] Attached SCSI disk
[   20.055385] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   20.055409] sd 0:0:1:0: Attached scsi generic sg1 type 0
[   20.055430] sr 1:0:0:0: Attached scsi generic sg2 type 5
[   20.055883] sr0: scsi3-mmc drive: 40x/48x writer cd/rw xa/form2 cdda tray
[   20.055887] Uniform CD-ROM driver Revision: 3.20
[   20.055934] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   20.173605] usb 1-1: new low speed USB device using uhci_hcd and address 4
[   20.346460] usb 1-1: configuration #1 chosen from 1 choice
[   20.588880] usb 1-2: new low speed USB device using uhci_hcd and address 5
[   20.762759] usb 1-2: configuration #1 chosen from 1 choice
[   20.781713] usbcore: registered new interface driver hiddev
[   20.796826] input: Dell Dell USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input1
[   20.808537] input,hidraw0: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:1d.0-1
[   20.822756] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input2
[   20.832480] input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-2
[   20.832496] usbcore: registered new interface driver usbhid
[   20.832500] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   26.040043] kjournald starting.  Commit interval 5 seconds
[   26.040056] EXT3-fs: mounted filesystem with ordered data mode.
[   33.654359] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   33.949740] iTCO_vendor_support: vendor-support=0
[   33.989353] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   33.989438] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[   33.989513] iTCO_wdt: No card detected
[   34.042295] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   34.081431] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   34.133420] Linux agpgart interface v0.102
[   34.265195] intel_rng: Firmware space is locked read-only. If you can't or
[   34.265199] intel_rng: don't want to disable this in firmware setup, and if
[   34.265200] intel_rng: you are certain that your system has a functional
[   34.265201] intel_rng: RNG, try using the 'no_fwh_detect' option.
[   34.428958] parport_pc 00:07: reported by Plug and Play ACPI
[   34.429016] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[   34.623301] input: Power Button (FF) as /devices/virtual/input/input4
[   34.632549] ACPI: Power Button (FF) [PWRF]
[   34.632663] input: Power Button (CM) as /devices/virtual/input/input5
[   34.648506] ACPI: Power Button (CM) [VBTN]
[   35.324750] nvidia: module license 'NVIDIA' taints kernel.
[   35.911162] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 23 (level, low) -> IRQ 21
[   35.911186] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[   35.962317] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   36.329580] intel8x0_measure_ac97_clock: measured 55133 usecs
[   36.329584] intel8x0: clocking to 48000
[   36.832620] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   36.832632] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   36.832800] NVRM: loading NVIDIA UNIX x86 Kernel Module  169.12  Thu Feb 14 17:53:07 PST 2008
[   38.282856] lp0: using parport0 (interrupt-driven).
[   38.706252] EXT3 FS on sda1, internal journal
[   39.402650] ip_tables: (C) 2000-2006 Netfilter Core Team
[   39.861342] No dock devices found.
[   41.140581] ppdev: user-space parallel port driver
[   41.340269] audit(1219234645.158:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5020 profile="/usr/sbin/cupsd" namespace="default"
[   41.600981] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   41.600987] apm: overridden by ACPI.
[   42.027816] audit(1219234645.847:3): type=1503 operation="inode_permission" requested_mask="::rw" denied_mask="::rw" name="/dev/tty" pid=5100 profile="/usr/sbin/cupsd" namespace="default"
[   45.788085] eth1: link down
[   46.172535] Bluetooth: Core ver 2.11
[   46.196532] NET: Registered protocol family 31
[   46.196537] Bluetooth: HCI device and connection manager initialized
[   46.196542] Bluetooth: HCI socket layer initialized
[   46.232453] Bluetooth: L2CAP ver 2.9
[   46.232458] Bluetooth: L2CAP socket layer initialized
[   46.316264] Bluetooth: RFCOMM socket layer initialized
[   46.316508] Bluetooth: RFCOMM TTY layer initialized
[   46.316512] Bluetooth: RFCOMM ver 1.8
[   47.517411] tg3: eth0: Link is up at 100 Mbps, full duplex.
[   47.517417] tg3: eth0: Flow control is on for TX and on for RX.
[   47.562805] NET: Registered protocol family 17
[   49.431026] NET: Registered protocol family 10
[   49.431505] lo: Disabled Privacy Extensions
[   49.432485] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   64.667794] eth0: no IPv6 routers present

-- 
Firefox opens without window decoration with Compiz
https://bugs.launchpad.net/bugs/251617
You received this bug notification because you are a member of Mozilla
Bugs, which is subscribed to firefox in ubuntu.




More information about the Ubuntu-mozillateam-bugs mailing list