[ubuntu-in] gnome ppp problem
Shashi Bhushan
bhushanx.cool at gmail.com
Fri Jan 15 18:11:35 GMT 2010
On Mon, Jan 11, 2010 at 5:40 PM, Shashi Bhushan <bhushanx.cool at gmail.com>wrote:
> [ 0.981712] bus: 03 index 2 mmio: [0x92400000-0x933fffff]
> [ 0.981714] bus: 03 index 3 mmio: [0x0-0x0]
> [ 0.981716] bus: 04 index 0 io port: [0x3000-0x4fff]
> [ 0.981718] bus: 04 index 1 mmio: [0x98700000-0x996fffff]
> [ 0.981720] bus: 04 index 2 mmio: [0x93400000-0x944fffff]
> [ 0.981722] bus: 04 index 3 mmio: [0x0-0x0]
> [ 0.981724] bus: 05 index 0 io port: [0x2000-0x2fff]
> [ 0.981726] bus: 05 index 1 mmio: [0x97600000-0x986fffff]
> [ 0.981728] bus: 05 index 2 mmio: [0x94500000-0x954fffff]
> [ 0.981730] bus: 05 index 3 mmio: [0x0-0x0]
> [ 0.981732] bus: 06 index 0 io port: [0x1000-0x1fff]
> [ 0.981734] bus: 06 index 1 mmio: [0x96600000-0x975fffff]
> [ 0.981736] bus: 06 index 2 mmio: [0x95500000-0x964fffff]
> [ 0.981738] bus: 06 index 3 mmio: [0x0-0x0]
> [ 0.981740] bus: 09 index 0 mmio: [0x0-0x0]
> [ 0.981742] bus: 09 index 1 mmio: [0x0-0x0]
> [ 0.981743] bus: 09 index 2 mmio: [0x0-0x0]
> [ 0.981745] bus: 09 index 3 io port: [0x00-0xffff]
> [ 0.981747] bus: 09 index 4 mmio: [0x000000-0xffffffff]
> [ 0.981754] NET: Registered protocol family 2
> [ 0.996055] IP route cache hash table entries: 32768 (order: 5, 131072
> bytes)
> [ 0.996295] TCP established hash table entries: 131072 (order: 8,
> 1048576 bytes)
> [ 0.996707] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> [ 0.996923] TCP: Hash tables configured (established 131072 bind 65536)
> [ 0.996926] TCP reno registered
> [ 1.004081] NET: Registered protocol family 1
> [ 1.004198] checking if image is initramfs... it is
> [ 1.606911] Freeing initrd memory: 7383k freed
> [ 1.606953] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
> [ 1.606955] Simple Boot Flag at 0x44 set to 0x1
> [ 1.607125] cpufreq: No nForce2 chipset.
> [ 1.607263] audit: initializing netlink socket (disabled)
> [ 1.607281] type=2000 audit(1263206011.604:1): initialized
> [ 1.614343] highmem bounce pool size: 64 pages
> [ 1.614348] HugeTLB registered 4 MB page size, pre-allocated 0 pages
> [ 1.615643] VFS: Disk quotas dquot_6.5.1
> [ 1.615701] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [ 1.616302] fuse init (API version 7.10)
> [ 1.616382] msgmni has been set to 1698
> [ 1.616560] alg: No test for stdrng (krng)
> [ 1.616569] io scheduler noop registered
> [ 1.616572] io scheduler anticipatory registered
> [ 1.616574] io scheduler deadline registered
> [ 1.616586] io scheduler cfq registered (default)
> [ 1.616598] pci 0000:00:02.0: Boot video device
> [ 9.616007] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?)
> 01010001
> [ 17.616007] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?)
> 01010001
> [ 17.616217] pcieport-driver 0000:00:1c.0: setting latency timer to 64
> [ 17.616270] pcieport-driver 0000:00:1c.0: found MSI capability
> [ 17.616273] pci_express 0000:00:1c.0:pcie00: allocate port service
> [ 17.616290] pci_express 0000:00:1c.0:pcie02: allocate port service
> [ 17.616301] pci_express 0000:00:1c.0:pcie03: allocate port service
> [ 17.616377] pcieport-driver 0000:00:1c.1: setting latency timer to 64
> [ 17.616428] pcieport-driver 0000:00:1c.1: found MSI capability
> [ 17.616431] pci_express 0000:00:1c.1:pcie00: allocate port service
> [ 17.616443] pci_express 0000:00:1c.1:pcie02: allocate port service
> [ 17.616454] pci_express 0000:00:1c.1:pcie03: allocate port service
> [ 17.616533] pcieport-driver 0000:00:1c.2: setting latency timer to 64
> [ 17.616584] pcieport-driver 0000:00:1c.2: found MSI capability
> [ 17.616586] pci_express 0000:00:1c.2:pcie00: allocate port service
> [ 17.616600] pci_express 0000:00:1c.2:pcie02: allocate port service
> [ 17.616612] pci_express 0000:00:1c.2:pcie03: allocate port service
> [ 17.616687] pcieport-driver 0000:00:1c.3: setting latency timer to 64
> [ 17.616737] pcieport-driver 0000:00:1c.3: found MSI capability
> [ 17.616740] pci_express 0000:00:1c.3:pcie00: allocate port service
> [ 17.616751] pci_express 0000:00:1c.3:pcie02: allocate port service
> [ 17.616763] pci_express 0000:00:1c.3:pcie03: allocate port service
> [ 17.616839] pcieport-driver 0000:00:1c.4: setting latency timer to 64
> [ 17.616889] pcieport-driver 0000:00:1c.4: found MSI capability
> [ 17.616892] pci_express 0000:00:1c.4:pcie00: allocate port service
> [ 17.616909] pci_express 0000:00:1c.4:pcie02: allocate port service
> [ 17.616921] pci_express 0000:00:1c.4:pcie03: allocate port service
> [ 17.616996] pcieport-driver 0000:00:1c.5: setting latency timer to 64
> [ 17.617047] pcieport-driver 0000:00:1c.5: found MSI capability
> [ 17.617050] pci_express 0000:00:1c.5:pcie00: allocate port service
> [ 17.617062] pci_express 0000:00:1c.5:pcie02: allocate port service
> [ 17.617074] pci_express 0000:00:1c.5:pcie03: allocate port service
> [ 17.617158] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 17.617385] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [ 17.748093] ACPI: AC Adapter [AC] (on-line)
> [ 17.971167] ACPI: Battery Slot [BAT0] (battery present)
> [ 17.971245] input: Power Button (FF) as
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> [ 17.971247] ACPI: Power Button (FF) [PWRF]
> [ 17.971287] input: Power Button (CM) as
> /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
> [ 17.971290] ACPI: Power Button (CM) [PWRB]
> [ 17.971333] input: Lid Switch as
> /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
> [ 17.971414] ACPI: Lid Switch [LID0]
> [ 17.971455] input: Sleep Button (CM) as
> /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
> [ 17.971465] ACPI: Sleep Button (CM) [SLPB]
> [ 18.010112] fan PNP0C0B:00: registered as cooling_device0
> [ 18.010118] ACPI: Fan [FAN] (on)
> [ 18.010912] ACPI: SSDT 7DA77C18, 0265 (r1 PmRef Cpu0Ist 3000
> INTL 20060912)
> [ 18.011470] ACPI: SSDT 7DA75618, 0594 (r1 PmRef Cpu0Cst 3001
> INTL 20060912)
> [ 18.012100] Monitor-Mwait will be used to enter C-1 state
> [ 18.012103] Monitor-Mwait will be used to enter C-2 state
> [ 18.012106] Monitor-Mwait will be used to enter C-3 state
> [ 18.012119] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
> [ 18.012138] processor ACPI_CPU:00: registered as cooling_device1
> [ 18.012142] ACPI: Processor [CPU0] (supports 8 throttling states)
> [ 18.012637] ACPI: SSDT 7DA76E18, 01CF (r1 PmRef ApIst 3000
> INTL 20060912)
> [ 18.013212] ACPI: SSDT 7DA77F18, 008D (r1 PmRef ApCst 3000
> INTL 20060912)
> [ 18.013924] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
> [ 18.013942] processor ACPI_CPU:01: registered as cooling_device2
> [ 18.013946] ACPI: Processor [CPU1] (supports 8 throttling states)
> [ 18.151510] thermal LNXTHERM:01: registered as thermal_zone0
> [ 18.172205] ACPI: Thermal Zone [THRM] (39 C)
> [ 18.172261] isapnp: Scanning for PnP cards...
> [ 18.526179] isapnp: No Plug & Play device found
> [ 18.536745] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
> [ 18.537751] brd: module loaded
> [ 18.538055] loop: module loaded
> [ 18.538118] Fixed MDIO Bus: probed
> [ 18.538123] PPP generic driver version 2.4.2
> [ 18.538179] input: Macintosh mouse button emulation as
> /devices/virtual/input/input4
> [ 18.538206] Driver 'sd' needs updating - please use bus_type methods
> [ 18.538214] Driver 'sr' needs updating - please use bus_type methods
> [ 18.538254] ahci 0000:00:1f.2: version 3.0
> [ 18.538269] ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ
> 21
> [ 18.538368] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3
> Gbps 0x33 impl SATA mode
> [ 18.538371] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led
> clo pmp pio slum part ems
> [ 18.538377] ahci 0000:00:1f.2: setting latency timer to 64
> [ 18.538686] scsi0 : ahci
> [ 18.538773] scsi1 : ahci
> [ 18.538827] scsi2 : ahci
> [ 18.538879] scsi3 : ahci
> [ 18.538931] scsi4 : ahci
> [ 18.538985] scsi5 : ahci
> [ 18.539160] ata1: SATA max UDMA/133 abar m2048 at 0x9c804000 port
> 0x9c804100 irq 21
> [ 18.539163] ata2: SATA max UDMA/133 abar m2048 at 0x9c804000 port
> 0x9c804180 irq 21
> [ 18.539165] ata3: DUMMY
> [ 18.539167] ata4: DUMMY
> [ 18.539170] ata5: SATA max UDMA/133 irq_stat 0x00000040, connection
> status changed irq 21
> [ 18.539173] ata6: SATA max UDMA/133 abar m2048 at 0x9c804000 port
> 0x9c804380 irq 21
> [ 19.020014] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 19.021841] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by
> device (Stat=0x51 Err=0x04)
> [ 19.021997] ata1.00: ACPI cmd ef/10:01:00:00:00:a0 rejected by
> device (Stat=0x51 Err=0x04)
> [ 19.022150] ata1.00: ACPI cmd ef/10:02:00:00:00:a0 rejected by
> device (Stat=0x51 Err=0x04)
> [ 19.022153] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
> [ 19.022311] ata1.00: ACPI cmd ef/10:04:00:00:00:a0 rejected by
> device (Stat=0x51 Err=0x04)
> [ 19.022470] ata1.00: ACPI cmd ef/10:05:00:00:00:a0 rejected by
> device (Stat=0x51 Err=0x04)
> [ 19.022475] ata1.00: ATA-8: WDC WD1600BEVT-60ZCT0, 12.01A12, max
> UDMA/100
> [ 19.022478] ata1.00: 312581808 sectors, multi 0: LBA48
> [ 19.024390] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by
> device (Stat=0x51 Err=0x04)
> [ 19.024557] ata1.00: ACPI cmd ef/10:01:00:00:00:a0 rejected by
> device (Stat=0x51 Err=0x04)
> [ 19.024715] ata1.00: ACPI cmd ef/10:02:00:00:00:a0 rejected by
> device (Stat=0x51 Err=0x04)
> [ 19.024717] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
> [ 19.024875] ata1.00: ACPI cmd ef/10:04:00:00:00:a0 rejected by
> device (Stat=0x51 Err=0x04)
> [ 19.025039] ata1.00: ACPI cmd ef/10:05:00:00:00:a0 rejected by
> device (Stat=0x51 Err=0x04)
> [ 19.025064] ata1.00: configured for UDMA/100
> [ 19.360018] ata2: SATA link down (SStatus 0 SControl 300)
> [ 20.264015] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 20.280033] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by
> device (Stat=0x51 Err=0x04)
> [ 20.280442] ata5.00: ACPI cmd ef/10:01:00:00:00:a0 succeeded
> [ 20.280818] ata5.00: ACPI cmd ef/10:02:00:00:00:a0 succeeded
> [ 20.280820] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
> [ 20.281194] ata5.00: ACPI cmd ef/10:04:00:00:00:a0 succeeded
> [ 20.281631] ata5.00: ACPI cmd ef/10:05:00:00:00:a0 succeeded
> [ 20.294680] ata5.00: ATAPI: TSSTcorp CDDVDW TS-L633A, HH04, max UDMA/100
> [ 20.310187] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by
> device (Stat=0x51 Err=0x04)
> [ 20.310592] ata5.00: ACPI cmd ef/10:01:00:00:00:a0 succeeded
> [ 20.310968] ata5.00: ACPI cmd ef/10:02:00:00:00:a0 succeeded
> [ 20.310970] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
> [ 20.311344] ata5.00: ACPI cmd ef/10:04:00:00:00:a0 succeeded
> [ 20.324117] ata5.00: configured for UDMA/100
> [ 20.660017] ata6: SATA link down (SStatus 0 SControl 300)
> [ 20.676105] scsi 0:0:0:0: Direct-Access ATA WDC
> WD1600BEVT-6 12.0 PQ: 0 ANSI: 5
> [ 20.676190] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors:
> (160 GB/149 GiB)
> [ 20.676206] sd 0:0:0:0: [sda] Write Protect is off
> [ 20.676208] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 20.676233] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 20.676293] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors:
> (160 GB/149 GiB)
> [ 20.676307] sd 0:0:0:0: [sda] Write Protect is off
> [ 20.676309] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 20.676333] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 20.676336] sda: sda1 sda2 < sda5 >
> [ 20.742780] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 20.742822] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 20.744867] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW
> TS-L633A HH04 PQ: 0 ANSI: 5
> [ 20.750353] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
> xa/form2 cdda tray
> [ 20.750356] Uniform CD-ROM driver Revision: 3.20
> [ 20.750440] sr 4:0:0:0: Attached scsi CD-ROM sr0
> [ 20.750477] sr 4:0:0:0: Attached scsi generic sg1 type 5
> [ 20.751197] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 20.751217] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) ->
> IRQ 18
> [ 20.751231] ehci_hcd 0000:00:1a.7: setting latency timer to 64
> [ 20.751235] ehci_hcd 0000:00:1a.7: EHCI Host Controller
> [ 20.751286] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
> bus number 1
> [ 20.755184] ehci_hcd 0000:00:1a.7: debug port 1
> [ 20.755191] ehci_hcd 0000:00:1a.7: cache line size of 32 is not
> supported
> [ 20.755205] ehci_hcd 0000:00:1a.7: irq 18, io mem 0x9c804c00
> [ 20.768009] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
> [ 20.768071] usb usb1: configuration #1 chosen from 1 choice
> [ 20.768101] hub 1-0:1.0: USB hub found
> [ 20.768108] hub 1-0:1.0: 4 ports detected
> [ 20.768207] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) ->
> IRQ 20
> [ 20.768218] ehci_hcd 0000:00:1d.7: setting latency timer to 64
> [ 20.768221] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> [ 20.768265] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
> bus number 2
> [ 20.772184] ehci_hcd 0000:00:1d.7: debug port 1
> [ 20.772191] ehci_hcd 0000:00:1d.7: cache line size of 32 is not
> supported
> [ 20.772203] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x9c804800
> [ 20.788008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> [ 20.788062] usb usb2: configuration #1 chosen from 1 choice
> [ 20.788086] hub 2-0:1.0: USB hub found
> [ 20.788093] hub 2-0:1.0: 8 ports detected
> [ 20.788197] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 20.788214] uhci_hcd: USB Universal Host Controller Interface driver
> [ 20.788234] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) ->
> IRQ 16
> [ 20.788241] uhci_hcd 0000:00:1a.0: setting latency timer to 64
> [ 20.788244] uhci_hcd 0000:00:1a.0: UHCI Host Controller
> [ 20.788287] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
> bus number 3
> [ 20.788322] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000080e0
> [ 20.788391] usb usb3: configuration #1 chosen from 1 choice
> [ 20.788416] hub 3-0:1.0: USB hub found
> [ 20.788423] hub 3-0:1.0: 2 ports detected
> [ 20.788502] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) ->
> IRQ 17
> [ 20.788508] uhci_hcd 0000:00:1a.1: setting latency timer to 64
> [ 20.788512] uhci_hcd 0000:00:1a.1: UHCI Host Controller
> [ 20.788549] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
> bus number 4
> [ 20.788582] uhci_hcd 0000:00:1a.1: irq 17, io base 0x000080c0
> [ 20.788656] usb usb4: configuration #1 chosen from 1 choice
> [ 20.788680] hub 4-0:1.0: USB hub found
> [ 20.788686] hub 4-0:1.0: 2 ports detected
> [ 20.788770] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) ->
> IRQ 20
> [ 20.788776] uhci_hcd 0000:00:1d.0: setting latency timer to 64
> [ 20.788780] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 20.788820] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
> bus number 5
> [ 20.788848] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000080a0
> [ 20.788917] usb usb5: configuration #1 chosen from 1 choice
> [ 20.788940] hub 5-0:1.0: USB hub found
> [ 20.788948] hub 5-0:1.0: 2 ports detected
> [ 20.789028] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) ->
> IRQ 22
> [ 20.789034] uhci_hcd 0000:00:1d.1: setting latency timer to 64
> [ 20.789038] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 20.789075] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
> bus number 6
> [ 20.789110] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00008080
> [ 20.789177] usb usb6: configuration #1 chosen from 1 choice
> [ 20.789203] hub 6-0:1.0: USB hub found
> [ 20.789209] hub 6-0:1.0: 2 ports detected
> [ 20.789287] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) ->
> IRQ 18
> [ 20.789293] uhci_hcd 0000:00:1d.2: setting latency timer to 64
> [ 20.789297] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [ 20.789339] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
> bus number 7
> [ 20.789366] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008060
> [ 20.789436] usb usb7: configuration #1 chosen from 1 choice
> [ 20.789459] hub 7-0:1.0: USB hub found
> [ 20.789466] hub 7-0:1.0: 2 ports detected
> [ 20.789545] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) ->
> IRQ 19
> [ 20.789552] uhci_hcd 0000:00:1d.3: setting latency timer to 64
> [ 20.789555] uhci_hcd 0000:00:1d.3: UHCI Host Controller
> [ 20.789593] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
> bus number 8
> [ 20.789628] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00008040
> [ 20.789701] usb usb8: configuration #1 chosen from 1 choice
> [ 20.789725] hub 8-0:1.0: USB hub found
> [ 20.789731] hub 8-0:1.0: 2 ports detected
> [ 20.789865] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at
> 0x60,0x64 irq 1,12
> [ 20.832269] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 20.832275] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 20.836039] mice: PS/2 mouse device common for all mice
> [ 20.856070] rtc_cmos 00:03: RTC can wake from S4
> [ 20.856104] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
> [ 20.856136] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
> [ 20.856193] device-mapper: uevent: version 1.0.3
> [ 20.856273] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23)
> initialised: dm-devel at redhat.com
> [ 20.856340] device-mapper: multipath: version 1.0.5 loaded
> [ 20.856342] device-mapper: multipath round-robin: version 1.0.0 loaded
> [ 20.856412] EISA: Probing bus 0 at eisa.0
> [ 20.856419] Cannot allocate resource for EISA slot 1
> [ 20.856421] Cannot allocate resource for EISA slot 2
> [ 20.856423] Cannot allocate resource for EISA slot 3
> [ 20.856425] Cannot allocate resource for EISA slot 4
> [ 20.856427] Cannot allocate resource for EISA slot 5
> [ 20.856430] Cannot allocate resource for EISA slot 6
> [ 20.856432] Cannot allocate resource for EISA slot 7
> [ 20.856434] Cannot allocate resource for EISA slot 8
> [ 20.856436] EISA: Detected 0 cards.
> [ 20.856555] cpuidle: using governor ladder
> [ 20.856670] cpuidle: using governor menu
> [ 20.857159] TCP cubic registered
> [ 20.857251] NET: Registered protocol family 10
> [ 20.857672] lo: Disabled Privacy Extensions
> [ 20.857993] NET: Registered protocol family 17
> [ 20.858008] Bluetooth: L2CAP ver 2.11
> [ 20.858010] Bluetooth: L2CAP socket layer initialized
> [ 20.858013] Bluetooth: SCO (Voice Link) ver 0.6
> [ 20.858014] Bluetooth: SCO socket layer initialized
> [ 20.858046] Bluetooth: RFCOMM socket layer initialized
> [ 20.858053] Bluetooth: RFCOMM TTY layer initialized
> [ 20.858055] Bluetooth: RFCOMM ver 1.10
> [ 20.858082] Marking TSC unstable due to TSC halts in idle
> [ 20.858629] Using IPI No-Shortcut mode
> [ 20.858694] registered taskstats version 1
> [ 20.858834] Magic number: 10:881:577
> [ 20.858928] rtc_cmos 00:03: setting system clock to 2010-01-11
> 10:33:51 UTC (1263206031)
> [ 20.858931] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [ 20.858933] EDD information not available.
> [ 20.859215] Freeing unused kernel memory: 532k freed
> [ 20.859364] Write protecting the kernel text: 4120k
> [ 20.859421] Write protecting the kernel read-only data: 1524k
> [ 20.882733] input: AT Translated Set 2 keyboard as
> /devices/platform/i8042/serio0/input/input5
> [ 21.169627] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
> [ 21.169682] r8169 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ
> 19
> [ 21.169876] r8169 0000:04:00.0: setting latency timer to 64
> [ 21.170400] r8169 0000:04:00.0: no MSI. Back to INTx.
> [ 21.171041] eth0: RTL8102e at 0xf7c6e000, 00:1e:ec:a1:71:4d, XID
> 24a00000 IRQ 19
> [ 21.268566] usb 2-5: new high speed USB device using ehci_hcd and
> address 4
> [ 21.418859] usb 2-5: configuration #1 chosen from 1 choice
> [ 21.502775] PM: Starting manual resume from disk
> [ 21.502778] PM: Resume from partition 8:5
> [ 21.502780] PM: Checking hibernation image.
> [ 21.502956] PM: Resume from disk failed.
> [ 21.560431] kjournald starting. Commit interval 5 seconds
> [ 21.560446] EXT3-fs: mounted filesystem with ordered data mode.
> [ 21.664612] usb 5-1: new full speed USB device using uhci_hcd and
> address 2
> [ 21.881032] usb 5-1: configuration #1 chosen from 1 choice
> [ 22.000115] Clocksource tsc unstable (delta = -382637125 ns)
> [ 22.128119] usb 6-1: new low speed USB device using uhci_hcd and address
> 2
> [ 22.309279] usb 6-1: configuration #1 chosen from 1 choice
> [ 26.307532] udev: starting version 141
> [ 26.439030] acpi device:04: registered as cooling_device3
> [ 26.454851] input: Video Bus as
> /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input6
> [ 26.480144] ACPI: Video Device [OVGA] (multi-head: yes rom: no post:
> no)
> [ 26.755783] iTCO_vendor_support: vendor-support=0
> [ 26.770276] Linux agpgart interface v0.103
> [ 26.856933] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45
> Express Chipset
> [ 26.857640] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
> [ 26.861079] agpgart-intel 0000:00:00.0: AGP aperture is 256M @
> 0x80000000
> [ 27.013089] sdhci: Secure Digital Host Controller Interface driver
> [ 27.013092] sdhci: Copyright(c) Pierre Ossman
> [ 27.057001] sdhci-pci 0000:05:00.0: SDHCI controller found
> [197b:2382] (rev 0)
> [ 27.057025] sdhci-pci 0000:05:00.0: PCI INT A -> GSI 16 (level,
> low) -> IRQ 16
> [ 27.057092] sdhci-pci 0000:05:00.0: setting latency timer to 64
> [ 27.057145] mmc0: SDHCI controller on PCI [0000:05:00.0] using ADMA
> [ 27.057155] sdhci-pci 0000:05:00.2: SDHCI controller found
> [197b:2381] (rev 0)
> [ 27.057172] sdhci-pci 0000:05:00.2: PCI INT A -> GSI 16 (level,
> low) -> IRQ 16
> [ 27.057178] sdhci-pci 0000:05:00.2: Refusing to bind to secondary
> interface.
> [ 27.057186] sdhci-pci 0000:05:00.2: PCI INT A disabled
> [ 27.206516] ieee80211_crypt: registered algorithm 'NULL'
> [ 27.209353] wl: module license 'MIXED/Proprietary' taints kernel.
> [ 27.211340] wl 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 27.211355] wl 0000:03:00.0: setting latency timer to 64
> [ 27.257854] input: PC Speaker as /devices/platform/pcspkr/input/input7
> [ 27.268274] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
> [ 27.268778] iTCO_wdt: Found a ICH9M TCO device (Version=2,
> TCOBASE=0x0460)
> [ 27.268889] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> [ 27.284223] Initializing USB Mass Storage driver...
> [ 27.285247] usb-storage: probe of 5-1:1.0 failed with error -5
> [ 27.285345] usb-storage: probe of 5-1:1.1 failed with error -5
> [ 27.285367] usbcore: registered new interface driver usb-storage
> [ 27.285393] USB Mass Storage support registered.
> [ 27.312282] usbcore: registered new interface driver hiddev
> [ 27.325949] input: Microsoft Microsoft Basic Optical Mouse v2.0
> as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input8
> [ 27.334690] generic-usb 0003:045E:00CB.0001: input,hidraw0: USB HID
> v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on
> usb-0000:00:1d.1-1/input0
> [ 27.334712] usbcore: registered new interface driver usbhid
> [ 27.334717] usbhid: v2.6:USB HID core driver
> [ 27.342869] Linux video capture interface: v2.00
> [ 27.345808] ieee80211_crypt: registered algorithm 'TKIP'
> [ 27.370593] usbcore: registered new interface driver usbserial
> [ 27.370607] USB Serial support registered for generic
> [ 27.370651] usbcore: registered new interface driver usbserial_generic
> [ 27.370653] usbserial: USB Serial Driver core
> [ 27.384802] USB Serial support registered for GSM modem (1-port)
> [ 27.384862] option 5-1:1.0: GSM modem (1-port) converter detected
> [ 27.384985] usb 5-1: GSM modem (1-port) converter now attached to
> ttyUSB0
> [ 27.384996] option 5-1:1.1: GSM modem (1-port) converter detected
> [ 27.385086] usb 5-1: GSM modem (1-port) converter now attached to
> ttyUSB1
> [ 27.385104] usbcore: registered new interface driver option
> [ 27.385106] option: v0.7.2:USB Driver for GSM modems
> [ 27.389055] eth1: Broadcom BCM4315 802.11 Wireless Controller 5.10.91.9
> [ 27.405624] uvcvideo: Found UVC 1.00 device CNF7062 (04f2:b098)
> [ 27.406564] input: CNF7062 as
> /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input9
> [ 27.418068] usbcore: registered new interface driver uvcvideo
> [ 27.418187] USB Video Class driver (v0.1.0)
> [ 27.473881] synaptics was reset on resume, see
> synaptics_resume_reset if you have trouble on resume
> [ 27.542413] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
> [ 27.542424] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 22 (level,
> low) -> IRQ 22
> [ 27.542542] HDA Intel 0000:00:1b.0: setting latency timer to 64
> [ 28.143632] lp: driver loaded but no devices found
> [ 28.216119] Adding 5927944k swap on /dev/sda5. Priority:-1
> extents:1 across:5927944k
> [ 28.422777] input: PS/2 Mouse as
> /devices/platform/i8042/serio1/input/input10
> [ 28.470865] input: AlpsPS/2 ALPS GlidePoint as
> /devices/platform/i8042/serio1/input/input11
> [ 28.862598] EXT3 FS on sda1, internal journal
> [ 29.904483] type=1505 audit(1263206040.545:2):
> operation="profile_load" name="/usr/share/gdm/guest-session/Xsession"
> name2="default" pid=2226
> [ 29.948746] type=1505 audit(1263206040.589:3):
> operation="profile_load" name="/sbin/dhclient-script" name2="default"
> pid=2230
> [ 29.948846] type=1505 audit(1263206040.589:4):
> operation="profile_load" name="/sbin/dhclient3" name2="default"
> pid=2230
> [ 29.948884] type=1505 audit(1263206040.589:5):
> operation="profile_load"
> name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default"
> pid=2230
> [ 29.948923] type=1505 audit(1263206040.589:6):
> operation="profile_load"
> name="/usr/lib/connman/scripts/dhclient-script" name2="default"
> pid=2230
> [ 30.071788] type=1505 audit(1263206040.709:7):
> operation="profile_load" name="/usr/lib/cups/backend/cups-pdf"
> name2="default" pid=2235
> [ 30.071962] type=1505 audit(1263206040.709:8):
> operation="profile_load" name="/usr/sbin/cupsd" name2="default"
> pid=2235
> [ 30.098634] type=1505 audit(1263206040.737:9):
> operation="profile_load" name="/usr/sbin/tcpdump" name2="default"
> pid=2239
> [ 32.436971] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 32.436974] Bluetooth: BNEP filters: protocol multicast
> [ 32.462183] Bridge firewalling registered
> [ 33.591041] ppdev: user-space parallel port driver
> [ 34.610768] [drm] Initialized drm 1.1.0 20060810
> [ 34.616401] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 34.616407] pci 0000:00:02.0: setting latency timer to 64
> [ 34.617259] [drm] Initialized i915 1.6.0 20080730 on minor 0
> [ 34.618304] [drm:i915_setparam] *ERROR* unknown parameter 4
> [ 37.358926] r8169: eth0: link down
> [ 37.359143] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 42.344050] eth1: no IPv6 routers present
> [ 43.257878] PPP BSD Compression module registered
> [ 43.580023] PPP Deflate Compression module registered
> [ 52.529252] CPU0 attaching NULL sched-domain.
> [ 52.529257] CPU1 attaching NULL sched-domain.
> [ 52.532122] CPU0 attaching sched-domain:
> [ 52.532126] domain 0: span 0-1 level MC
> [ 52.532130] groups: 0 1
> [ 52.532139] CPU1 attaching sched-domain:
> [ 52.532142] domain 0: span 0-1 level MC
> [ 52.532146] groups: 1 0
> [ 1105.831819] PPP: VJ decompression error
> [ 2253.992137] hub 6-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
> [ 2253.992151] usb 6-1: USB disconnect, address 2
> [ 2254.244581] usb 6-1: new low speed USB device using uhci_hcd and address
> 3
> [ 2254.428749] usb 6-1: configuration #1 chosen from 1 choice
> [ 2254.445024] input: Microsoft Microsoft Basic Optical Mouse v2.0
> as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input12
> [ 2254.474532] generic-usb 0003:045E:00CB.0002: input,hidraw0: USB HID
> v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on
> usb-0000:00:1d.1-1/input0
> [ 2932.485045] PPP: VJ decompression error
> [ 3561.792223] PPP: VJ decompression error
> [ 3828.462219] PPP: VJ decompression error
> [ 3911.904231] PPP: VJ decompression error
> [ 5553.880455] usb 5-1: USB disconnect, address 2
> [ 5553.883473] option1 ttyUSB0: GSM modem (1-port) converter now
> disconnected from ttyUSB0
> [ 5553.883648] option 5-1:1.0: device disconnected
> [ 5553.887926] option1 ttyUSB1: GSM modem (1-port) converter now
> disconnected from ttyUSB1
> [ 5553.887962] option 5-1:1.1: device disconnected
> [ 5568.460184] usb 5-1: new full speed USB device using uhci_hcd and
> address 3
> [ 5568.672121] hub 5-0:1.0: unable to enumerate USB device on port 1
> [ 5569.744190] usb 5-1: new full speed USB device using uhci_hcd and
> address 4
> [ 5569.973235] usb 5-1: configuration #1 chosen from 1 choice
> [ 5569.984681] usb-storage: probe of 5-1:1.0 failed with error -5
> [ 5569.984731] option 5-1:1.0: GSM modem (1-port) converter detected
> [ 5569.984911] usb 5-1: GSM modem (1-port) converter now attached to
> ttyUSB0
> [ 5569.990354] usb-storage: probe of 5-1:1.1 failed with error -5
> [ 5569.990394] option 5-1:1.1: GSM modem (1-port) converter detected
> [ 5569.990536] usb 5-1: GSM modem (1-port) converter now attached to
> ttyUSB1
> shashi at shashi-laptop:~$
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://lists.ubuntu.com/archives/ubuntu-in/attachments/20100115/dfaf1e8d/attachment-0001.htm
More information about the ubuntu-in
mailing list