[Ubuntu-BR] Nvidia Solução

Segunda Outubro 17 18:47:04 UTC 2005

Como meus cd's ainda naum chegaram ainda estou com o Hoary, que por
sinal acho que ele é muitooooo bommm.... 

Peguei o driver no site da nvidia "1.0-7676", mas tive que baixar umas
paradas como
o linux-headers, linux-source, build-essential tudo para o kernel que vc
usa ( uname -r ). Isso tem tudo no manual, tenho uma Gforce Go 64MB que
é do note HP Pavilion, ficou DEZ...

Em Seg, 2005-10-17 às 14:30 -0200, Rafael Puga escreveu:
> eh.. tentei fazer isso no breezy usando o driver 7676 e nada..
> primeiramente dava erro na versao do gcc.. q era 4.0 nao consegui
> instalar a 3.4 sem q a 4.0 tivesse instalada.. por fim.. removi todas
> as versoes do GCC.. mudei meu sources.list temporariamente para
> repositorios do hoary.. e instalei o gcc 3.4 soh q daee.. o erro
> relativo ao gcc parou de aparecer.. e depois o erro passou a ser no
> "nvidia.ko" daee desisti.. to usando o Hoary again :/
> qdo estava a versao 4.0 e a 3.4 instalada.. tentei:
> CC=gcc-3.4
> export CC
> 
> mas nao mudava nada.. nao sei se a versao 7667 seria diferente..
> alias.. nem achei ela no site da nvidia..
> 
> 
> 
> On 10/17/05, Luis Felipe Pigozzo <felipe em pigozzo.com> wrote:
> > Depois de muito Stress baixei pelo synaptic todos os pacotes da Nvidia e
> > instalei um gcc mais atualizado...
> >
> > baixei o driver da nvidia e segui o seguinte tutorial abaixo:
> >
> >
> > > If you want to install Nvidia driver with the nvidia installer (I've
> > > tried v.7667) and you use a kernel from Ubuntu Hoary or you compiled it
> > > from Hoary sources (or kernel.org sources), then just try this HOWTO.
> > > If you have a kernel from Ubuntu Breezy then try this HOWTO:
> > > http://www.ubuntuforums.org/showthread.php?t=52924 OR just look at point
> > > 2 of the problems section of THIS guide.
> > >
> > > Make sure you graphic card is not among the ones which are NOT SUPPORTED
> > > by looking at the list you will find in the NOTES SECTION *
> > >
> > > You need 7676 version only if you have Geforce 7800, otherwise is
> > > useless (and it has some bugs). If you haven't got this graphic card
> > > PLEASE try 7667, it's more stable.
> > >
> > > Download the installer from this page according to your architecture
> > > (32bit or 64bit)
> > > http://www.nvidia.com/object/unix.html
> > >
> > > Before you start you have to make sure the following things are
> > > installed (see points "a","b","c"). If not, you can install them
> > > following these steps:
> > >
> > > Open either Terminal or Konsole and type:
> > >
> > > uname -r (this will tell you the name and version of the kernel you are
> > > using)
> > >
> > > Open either Synaptic or Kynaptic
> > >
> > > a) press the "Search" button and put "header" in the search field
> > >
> > > you will see a list of files, find "linux-headers-the name you got from
> > > uname -r"
> > >
> > > for example if your kernel is "2.6.10-5-386", the headers will be
> > > "linux-headers-2.6.10-5-386"
> > >
> > > click on the files and select "Mark for installation"
> > >
> > > b) press the "Search" button and put "linux-source" in the search field
> > >
> > > you will see a list of files, find "linux-source-the name you got from
> > > uname -r"
> > >
> > > click on the file and select "Mark for installation"
> > >
> > > c) press the "Search" button and put "build-essential" in the search
> > > field
> > >
> > > click on the file and select "Mark for installation"
> > >
> > >
> > > d) Press the "Apply" button.
> > >
> > > You can close Synaptic (or Kynaptic) after it has finished installing
> > > the headers.
> > >
> > >
> > > Ok, now let's begin:
> > >
> > > 1) uninstall nvidia-glx (if you don't have it just go to step 2)
> > >
> > > 2) remove the file manually:
> > > sudo rm /etc/init.d/nvidia-glx
> > >
> > > 3) sudo apt-get install gcc (just in case)
> > >
> > > ctl-alt-f1 (so as to get to the command line, not a windowed terminal,
> > > but out of the graphical interface GUI)
> > >
> > > login with your username and password (if required)
> > >
> > > sudo /etc/init.d/gdm stop (or "kdm stop" if you use KDE)
> > >
> > > cd "directory where you have the nvidia installer"
> > >
> > > If you have Ubuntu 64bit type: **
> > > sudo sh NVIDIA-Linux-x86_64-1.0-7667-pkg2.run
> > >
> > > Otherwise if you have Ubuntu 32 bit type:
> > > sudo sh NVIDIA-Linux-x86-1.0-7667-pkg2.run
> > >
> > > If you have Ubuntu 64bit you can't install OpenGL32bit compatibility
> > > libraries, so when the installer asks whether to install it just answer
> > > no OR you may want to try a workaround which Draugen found but which I
> > > haven't tried myself (look at the PROBLEMS SECTION at the end of the
> > > guide: point 5).
> > >
> > > sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf_backup
> > >
> > > sudo nano /etc/X11/xorg.conf
> > > scroll the file down until you find the line with "Modules" and comment
> > > out (by putting a "#" before the line) the 2 lines I put in blue and add
> > > Load "glx". It should look like the example below:
> > >
> > >
> > > Section "Module"
> > > Load "bitmap"
> > > Load "dbe"
> > > Load "ddc"
> > > #Load "dri"
> > > #Load "GLcore"
> > > Load "extmod"
> > > Load "freetype"
> > > Load "glx"
> > > Load "int10"
> > > Load "record"
> > > Load "type1"
> > > Load "vbe"
> > >
> > > Then find the section Device and make sure the word I put in red is
> > > "nvidia":
> > >
> > > Section "Device"
> > > Identifier "NVIDIA Corporation NV40 [GeForce 6200 TurboCache]"
> > > Driver "nvidia"
> > > BusID "PCI:1:0:0"
> > >
> > >
> > > CTRL+O to save (yes, use the same name and overwrite the file)
> > > CTRL+X to exit
> > >
> > > sudo /etc/init.d/gdm start (or "kdm start" if you use KDE)
> > >
> > > Now you have installed the new nvidia driver.
> > >
> > > If you want a "control panel" which shows the settings of your card you
> > > might want to install "Nvidia-settings" (this part of the guide has been
> > > taken from the Unofficial Ubuntu Starter Guide) although they driver
> > > works fine also without it (the choice it's up to you).
> > >
> > > Open Terminal or Konsole and type
> > >
> > > sudo apt-get install nvidia-settings
> > >
> > > sudo gedit /usr/share/applications/NVIDIA-Settings.desktop (you can use
> > > "kate" instead of "gedit" in KDE)
> > >
> > > Insert the following lines into the new file:
> > >
> > > [Desktop Entry]
> > > Name=NVIDIA Settings
> > > Comment=NVIDIA Settings
> > > Exec=nvidia-settings
> > > Icon=
> > > Terminal=false
> > > Type=Application
> > > Categories=Application;System;
> > >
> > >
> > > Save the file and exit.
> > >
> > > Restart your computer
> > >
> > > You will be able to see "Nvidia settings" in the menu (the one from
> > > which you launch all the applications)
> > >
> > > Enjoy!
> > > -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
> > > NOTES SECTION
> > >
> > > * Below are the legacy GPUs that are no longer supported in the unified
> > > driver.
> > > These GPUs will continue to be maintained through the special legacy
> > > NVIDIA
> > > GPU driver releases.
> > >
> > > NVIDIA chip name Device PCI ID
> > > ------------------------------- -------------------------------
> > > RIVA TNT 0x0020
> > > RIVA TNT2/TNT2 Pro 0x0028
> > > RIVA TNT2 Ultra 0x0029
> > > Vanta/Vanta LT 0x002C
> > > RIVA TNT2 Model 64/Model 64 Pro 0x002D
> > > Aladdin TNT2 0x00A0
> > > GeForce 256 0x0100
> > > GeForce DDR 0x0101
> > > Quadro 0x0103
> > > GeForce2 GTS/GeForce2 Pro 0x0150
> > > GeForce2 Ti 0x0151
> > > GeForce2 Ultra 0x0152
> > > Quadro2 Pro 0x0153
> > > ----------------------------------------------------------------
> > >
> > >
> > > ** the name of the installer may vary:
> > > e.g. it could be NVIDIA-Linux-x86_64-1.0-7667-pkg1.run.
> > >
> > > So just put the name of the installer you've downloaded from Nvidia
> > > website.
> > > -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
> > >
> > > PROBLEMS SECTION
> > >
> > > 1) If the installer reports that the "Framebuffer" kernel module
> > > conflicts with the drivers you will have to recompile your kernel and
> > > disable this function
> > > Here's a HOWTO for kernel compilation for newbies
> > > http://www.ubuntuforums.org/showthre...5&page=1&pp=10
> > >
> > > 2) If the installer complains in this way (this is an example of part of
> > > the error):
> > > ...
> > > nvidia: version magic '2.6.10-5-386 preempt 386 gcc-3.4' should be
> > > '2.6.10-5-386 preempt 386 gcc-3.3'
> > > ERROR: Installation has failed. Please see the file
> > > '/var/log/nvidia-installer.log' for details.
> > > ...
> > >
> > > This means the installer tries to use gcc-3.4 instead of gcc-3.3(the
> > > right one).Type this before launching NVIDIA installer:
> > >
> > > CC=gcc-3.3
> > > export CC
> > >
> > > The number of the version of gcc has to be the same as the 2nd one
> > > reported in the error by nvidia installer (i.e. the word I put in red
> > > instead of the one I put in blue)
> > >
> > > then run nvidia installer again.
> > >
> > > 3) If the installer complains in this way:
> > > ...
> > > ERROR: Unable to find the development tool `cc` in your path; please
> > > make sure
> > > that you have the package 'gcc' installed. If gcc is installed on your
> > > system, then please check that `cc` is in your PATH.
> > >
> > > The user Reid has suggested this solution:
> > >
> > > To find out where 'gcc' is located I did:
> > > Code:
> > >
> > > which gcc
> > >
> > >
> > > which returned:
> > > Code:
> > >
> > > /usr/bin/gcc
> > >
> > >
> > > then I made a symbolic link to gcc called cc so programs trying to use
> > > 'cc' would get gcc, with this code:
> > > Code:
> > >
> > > sudo ln -s /usr/bin/gcc /usr/bin/cc
> > >
> > > Then try the installer again.
> > >
> > > 4) If you have an AGP graphic card and your system freezes but you can
> > > still move the mouse pointer you will have to do this:
> > > sudo nano /etc/X11/xorg.conf
> > > Add the lines in red at this section of the file:
> > >
> > > Section "Device"
> > > Identifier "NVIDIA Corporation NV40 [GeForce 6200 TurboCache]"
> > > Driver "nvidia"
> > > BusID "PCI:1:0:0"
> > > Option "NvAGP" "0"
> > > Option "RenderAccel" "Off"
> > > Option "IgnoreDisplayDevices" "DFP,TV"
> > > Option "NoRenderExtension" "Off"
> > > Option "Accel" "Off"
> > > Option "AllowGLXWithComposite" "Off"
> > >
> > > EndSection
> > >
> > >
> > > This will either disable 3d acceleration or make it slower (sorry but I
> > > haven't got an AGP card so I haven't tried them myself)
> > >
> > > If this doesn't work for you try asking at this Forum and you might be
> > > talking to some of the developers of the NVIDIA drivers (there's a Linux
> > > section) (it's very useful)
> > > http://www.nvnews.net/vbulletin/forumdisplay.php?f=14
> > >
> > > 5) If you have Ubuntu 64bit you will have some problems when trying to
> > > install OpenGL32bit compatibility libraries, so yuomay want to try a
> > > workaround suggested by Draugen but which I haven't tried myself
> > >
> > > type:
> > >
> > > sudo mkdir /emul
> > > sudo mkdir /emul/ia32-linux
> > > sudo mkdir /emul/ia32-linux/usr
> > >
> > > sudo ln -s /usr/lib32 /emul/ia32-linux/usr/lib
> > >
> > >
> > > if /usr/lib32 does not exist, you need to do this
> > >
> > > Type:
> > >
> > > sudo apt-get install ia32-libs lib32gcc1 lib32stdc++6
> > >
> > > without which the opengl compat libs probably won't be much use anyway
> > >
> > > there are more 32bit libs as well. check synaptic.
> >
> >
> > Isso funcionou perfeitamente, uso meu note widescreen com a resolução
> > apropriada.
> >
> >
> >
> >
> > --
> > Luis Felipe Pigozzo
> > felipe em pigozzo.com
> > pigozzo em gmail.com
> > www.pigozzo.com
> >
> >
> >
> >
> > --
> > ubuntu-br mailing list
> > ubuntu-br em lists.ubuntu.com
> > www.ubuntu-br.org
> > http://lists.ubuntu.com/mailman/listinfo/ubuntu-br
> >
> >
> >
> >
> 
> 
> --
> Rafael Puga
> CCP (COC-RP) - 2º Semestre :)
> Iniciante: C / Python
> 
-- 
Luis Felipe Pigozzo
felipe em pigozzo.com
pigozzo em gmail.com
www.pigozzo.com