Re: [Ubuntu-BR] Nvidia Solução

Segunda Outubro 17 20:24:16 UTC 2005

Nao sei se eu perdi o comeco da conversa mas, porque nao instalar os drivers
binarios do NVidia como sugerido aqui:
https://wiki.ubuntu.com/BinaryDriverHowto/Nvidia? Tenho um GeForce 5200 que
roda "redondinho" assim... =)

On 10/17/05, Luis Felipe Pigozzo <felipe em pigozzo.com> wrote:
>
> Como meus cd's ainda naum chegaram ainda estou com o Hoary, que por
> sinal acho que ele é muitooooo bommm....
>
> Peguei o driver no site da nvidia "1.0-7676", mas tive que baixar umas
> paradas como
> o linux-headers, linux-source, build-essential tudo para o kernel que vc
> usa ( uname -r ). Isso tem tudo no manual, tenho uma Gforce Go 64MB que
> é do note HP Pavilion, ficou DEZ...
>
>
>
>
>
>
>
> Em Seg, 2005-10-17 às 14:30 -0200, Rafael Puga escreveu:
> > eh.. tentei fazer isso no breezy usando o driver 7676 e nada..
> > primeiramente dava erro na versao do gcc.. q era 4.0 nao consegui
> > instalar a 3.4 sem q a 4.0 tivesse instalada.. por fim.. removi todas
> > as versoes do GCC.. mudei meu sources.list temporariamente para
> > repositorios do hoary.. e instalei o gcc 3.4 soh q daee.. o erro
> > relativo ao gcc parou de aparecer.. e depois o erro passou a ser no
> > "nvidia.ko" daee desisti.. to usando o Hoary again :/
> > qdo estava a versao 4.0 e a 3.4 instalada.. tentei:
> > CC=gcc-3.4
> > export CC
> >
> > mas nao mudava nada.. nao sei se a versao 7667 seria diferente..
> > alias.. nem achei ela no site da nvidia..
> >
> >
> >
> > On 10/17/05, Luis Felipe Pigozzo <felipe em pigozzo.com> wrote:
> > > Depois de muito Stress baixei pelo synaptic todos os pacotes da Nvidia
> e
> > > instalei um gcc mais atualizado...
> > >
> > > baixei o driver da nvidia e segui o seguinte tutorial abaixo:
> > >
> > >
> > > > If you want to install Nvidia driver with the nvidia installer (I've
> > > > tried v.7667) and you use a kernel from Ubuntu Hoary or you compiled
> it
> > > > from Hoary sources (or kernel.org <http://kernel.org> sources), then
> just try this HOWTO.
> > > > If you have a kernel from Ubuntu Breezy then try this HOWTO:
> > > > http://www.ubuntuforums.org/showthread.php?t=52924 OR just look at
> point
> > > > 2 of the problems section of THIS guide.
> > > >
> > > > Make sure you graphic card is not among the ones which are NOT
> SUPPORTED
> > > > by looking at the list you will find in the NOTES SECTION *
> > > >
> > > > You need 7676 version only if you have Geforce 7800, otherwise is
> > > > useless (and it has some bugs). If you haven't got this graphic card
> > > > PLEASE try 7667, it's more stable.
> > > >
> > > > Download the installer from this page according to your architecture
> > > > (32bit or 64bit)
> > > > http://www.nvidia.com/object/unix.html
> > > >
> > > > Before you start you have to make sure the following things are
> > > > installed (see points "a","b","c"). If not, you can install them
> > > > following these steps:
> > > >
> > > > Open either Terminal or Konsole and type:
> > > >
> > > > uname -r (this will tell you the name and version of the kernel you
> are
> > > > using)
> > > >
> > > > Open either Synaptic or Kynaptic
> > > >
> > > > a) press the "Search" button and put "header" in the search field
> > > >
> > > > you will see a list of files, find "linux-headers-the name you got
> from
> > > > uname -r"
> > > >
> > > > for example if your kernel is "2.6.10-5-386", the headers will be
> > > > "linux-headers-2.6.10-5-386"
> > > >
> > > > click on the files and select "Mark for installation"
> > > >
> > > > b) press the "Search" button and put "linux-source" in the search
> field
> > > >
> > > > you will see a list of files, find "linux-source-the name you got
> from
> > > > uname -r"
> > > >
> > > > click on the file and select "Mark for installation"
> > > >
> > > > c) press the "Search" button and put "build-essential" in the search
> > > > field
> > > >
> > > > click on the file and select "Mark for installation"
> > > >
> > > >
> > > > d) Press the "Apply" button.
> > > >
> > > > You can close Synaptic (or Kynaptic) after it has finished
> installing
> > > > the headers.
> > > >
> > > >
> > > > Ok, now let's begin:
> > > >
> > > > 1) uninstall nvidia-glx (if you don't have it just go to step 2)
> > > >
> > > > 2) remove the file manually:
> > > > sudo rm /etc/init.d/nvidia-glx
> > > >
> > > > 3) sudo apt-get install gcc (just in case)
> > > >
> > > > ctl-alt-f1 (so as to get to the command line, not a windowed
> terminal,
> > > > but out of the graphical interface GUI)
> > > >
> > > > login with your username and password (if required)
> > > >
> > > > sudo /etc/init.d/gdm stop (or "kdm stop" if you use KDE)
> > > >
> > > > cd "directory where you have the nvidia installer"
> > > >
> > > > If you have Ubuntu 64bit type: **
> > > > sudo sh NVIDIA-Linux-x86_64-1.0-7667-pkg2.run
> > > >
> > > > Otherwise if you have Ubuntu 32 bit type:
> > > > sudo sh NVIDIA-Linux-x86-1.0-7667-pkg2.run
> > > >
> > > > If you have Ubuntu 64bit you can't install OpenGL32bit compatibility
> > > > libraries, so when the installer asks whether to install it just
> answer
> > > > no OR you may want to try a workaround which Draugen found but which
> I
> > > > haven't tried myself (look at the PROBLEMS SECTION at the end of the
> > > > guide: point 5).
> > > >
> > > > sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf_backup
> > > >
> > > > sudo nano /etc/X11/xorg.conf
> > > > scroll the file down until you find the line with "Modules" and
> comment
> > > > out (by putting a "#" before the line) the 2 lines I put in blue and
> add
> > > > Load "glx". It should look like the example below:
> > > >
> > > >
> > > > Section "Module"
> > > > Load "bitmap"
> > > > Load "dbe"
> > > > Load "ddc"
> > > > #Load "dri"
> > > > #Load "GLcore"
> > > > Load "extmod"
> > > > Load "freetype"
> > > > Load "glx"
> > > > Load "int10"
> > > > Load "record"
> > > > Load "type1"
> > > > Load "vbe"
> > > >
> > > > Then find the section Device and make sure the word I put in red is
> > > > "nvidia":
> > > >
> > > > Section "Device"
> > > > Identifier "NVIDIA Corporation NV40 [GeForce 6200 TurboCache]"
> > > > Driver "nvidia"
> > > > BusID "PCI:1:0:0"
> > > >
> > > >
> > > > CTRL+O to save (yes, use the same name and overwrite the file)
> > > > CTRL+X to exit
> > > >
> > > > sudo /etc/init.d/gdm start (or "kdm start" if you use KDE)
> > > >
> > > > Now you have installed the new nvidia driver.
> > > >
> > > > If you want a "control panel" which shows the settings of your card
> you
> > > > might want to install "Nvidia-settings" (this part of the guide has
> been
> > > > taken from the Unofficial Ubuntu Starter Guide) although they driver
> > > > works fine also without it (the choice it's up to you).
> > > >
> > > > Open Terminal or Konsole and type
> > > >
> > > > sudo apt-get install nvidia-settings
> > > >
> > > > sudo gedit /usr/share/applications/NVIDIA-Settings.desktop (you can
> use
> > > > "kate" instead of "gedit" in KDE)
> > > >
> > > > Insert the following lines into the new file:
> > > >
> > > > [Desktop Entry]
> > > > Name=NVIDIA Settings
> > > > Comment=NVIDIA Settings
> > > > Exec=nvidia-settings
> > > > Icon=
> > > > Terminal=false
> > > > Type=Application
> > > > Categories=Application;System;
> > > >
> > > >
> > > > Save the file and exit.
> > > >
> > > > Restart your computer
> > > >
> > > > You will be able to see "Nvidia settings" in the menu (the one from
> > > > which you launch all the applications)
> > > >
> > > > Enjoy!
> > > >
> -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
> > > > NOTES SECTION
> > > >
> > > > * Below are the legacy GPUs that are no longer supported in the
> unified
> > > > driver.
> > > > These GPUs will continue to be maintained through the special legacy
> > > > NVIDIA
> > > > GPU driver releases.
> > > >
> > > > NVIDIA chip name Device PCI ID
> > > > ------------------------------- -------------------------------
> > > > RIVA TNT 0x0020
> > > > RIVA TNT2/TNT2 Pro 0x0028
> > > > RIVA TNT2 Ultra 0x0029
> > > > Vanta/Vanta LT 0x002C
> > > > RIVA TNT2 Model 64/Model 64 Pro 0x002D
> > > > Aladdin TNT2 0x00A0
> > > > GeForce 256 0x0100
> > > > GeForce DDR 0x0101
> > > > Quadro 0x0103
> > > > GeForce2 GTS/GeForce2 Pro 0x0150
> > > > GeForce2 Ti 0x0151
> > > > GeForce2 Ultra 0x0152
> > > > Quadro2 Pro 0x0153
> > > > ----------------------------------------------------------------
> > > >
> > > >
> > > > ** the name of the installer may vary:
> > > > e.g. it could be NVIDIA-Linux-x86_64-1.0-7667-pkg1.run.
> > > >
> > > > So just put the name of the installer you've downloaded from Nvidia
> > > > website.
> > > >
> -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
> > > >
> > > > PROBLEMS SECTION
> > > >
> > > > 1) If the installer reports that the "Framebuffer" kernel module
> > > > conflicts with the drivers you will have to recompile your kernel
> and
> > > > disable this function
> > > > Here's a HOWTO for kernel compilation for newbies
> > > > http://www.ubuntuforums.org/showthre...5&page=1&pp=10
> > > >
> > > > 2) If the installer complains in this way (this is an example of
> part of
> > > > the error):
> > > > ...
> > > > nvidia: version magic '2.6.10-5-386 preempt 386 gcc-3.4' should be
> > > > '2.6.10-5-386 preempt 386 gcc-3.3'
> > > > ERROR: Installation has failed. Please see the file
> > > > '/var/log/nvidia-installer.log' for details.
> > > > ...
> > > >
> > > > This means the installer tries to use gcc-3.4 instead of gcc-3.3(the
> > > > right one).Type this before launching NVIDIA installer:
> > > >
> > > > CC=gcc-3.3
> > > > export CC
> > > >
> > > > The number of the version of gcc has to be the same as the 2nd one
> > > > reported in the error by nvidia installer (i.e. the word I put in
> red
> > > > instead of the one I put in blue)
> > > >
> > > > then run nvidia installer again.
> > > >
> > > > 3) If the installer complains in this way:
> > > > ...
> > > > ERROR: Unable to find the development tool `cc` in your path; please
> > > > make sure
> > > > that you have the package 'gcc' installed. If gcc is installed on
> your
> > > > system, then please check that `cc` is in your PATH.
> > > >
> > > > The user Reid has suggested this solution:
> > > >
> > > > To find out where 'gcc' is located I did:
> > > > Code:
> > > >
> > > > which gcc
> > > >
> > > >
> > > > which returned:
> > > > Code:
> > > >
> > > > /usr/bin/gcc
> > > >
> > > >
> > > > then I made a symbolic link to gcc called cc so programs trying to
> use
> > > > 'cc' would get gcc, with this code:
> > > > Code:
> > > >
> > > > sudo ln -s /usr/bin/gcc /usr/bin/cc
> > > >
> > > > Then try the installer again.
> > > >
> > > > 4) If you have an AGP graphic card and your system freezes but you
> can
> > > > still move the mouse pointer you will have to do this:
> > > > sudo nano /etc/X11/xorg.conf
> > > > Add the lines in red at this section of the file:
> > > >
> > > > Section "Device"
> > > > Identifier "NVIDIA Corporation NV40 [GeForce 6200 TurboCache]"
> > > > Driver "nvidia"
> > > > BusID "PCI:1:0:0"
> > > > Option "NvAGP" "0"
> > > > Option "RenderAccel" "Off"
> > > > Option "IgnoreDisplayDevices" "DFP,TV"
> > > > Option "NoRenderExtension" "Off"
> > > > Option "Accel" "Off"
> > > > Option "AllowGLXWithComposite" "Off"
> > > >
> > > > EndSection
> > > >
> > > >
> > > > This will either disable 3d acceleration or make it slower (sorry
> but I
> > > > haven't got an AGP card so I haven't tried them myself)
> > > >
> > > > If this doesn't work for you try asking at this Forum and you might
> be
> > > > talking to some of the developers of the NVIDIA drivers (there's a
> Linux
> > > > section) (it's very useful)
> > > > http://www.nvnews.net/vbulletin/forumdisplay.php?f=14
> > > >
> > > > 5) If you have Ubuntu 64bit you will have some problems when trying
> to
> > > > install OpenGL32bit compatibility libraries, so yuomay want to try a
> > > > workaround suggested by Draugen but which I haven't tried myself
> > > >
> > > > type:
> > > >
> > > > sudo mkdir /emul
> > > > sudo mkdir /emul/ia32-linux
> > > > sudo mkdir /emul/ia32-linux/usr
> > > >
> > > > sudo ln -s /usr/lib32 /emul/ia32-linux/usr/lib
> > > >
> > > >
> > > > if /usr/lib32 does not exist, you need to do this
> > > >
> > > > Type:
> > > >
> > > > sudo apt-get install ia32-libs lib32gcc1 lib32stdc++6
> > > >
> > > > without which the opengl compat libs probably won't be much use
> anyway
> > > >
> > > > there are more 32bit libs as well. check synaptic.
> > >
> > >
> > > Isso funcionou perfeitamente, uso meu note widescreen com a resolução
> > > apropriada.
> > >
> > >
> > >
> > >
> > > --
> > > Luis Felipe Pigozzo
> > > felipe em pigozzo.com
> > > pigozzo em gmail.com
> > > www.pigozzo.com <http://www.pigozzo.com>
> > >
> > >
> > >
> > >
> > > --
> > > ubuntu-br mailing list
> > > ubuntu-br em lists.ubuntu.com
> > > www.ubuntu-br.org <http://www.ubuntu-br.org>
> > > http://lists.ubuntu.com/mailman/listinfo/ubuntu-br
> > >
> > >
> > >
> > >
> >
> >
> > --
> > Rafael Puga
> > CCP (COC-RP) - 2º Semestre :)
> > Iniciante: C / Python
> >
> --
> Luis Felipe Pigozzo
> felipe em pigozzo.com
> pigozzo em gmail.com
> www.pigozzo.com <http://www.pigozzo.com>
>
>
>
>
> --
> ubuntu-br mailing list
> ubuntu-br em lists.ubuntu.com
> www.ubuntu-br.org <http://www.ubuntu-br.org>
> http://lists.ubuntu.com/mailman/listinfo/ubuntu-br
>
>
>

--
"There's no place like 127.0.0.1 <http://127.0.0.1>"

Og B. Maciel

.NET / Oracle Developer by day
Linux Evangelist by night

Linux Registered User 286200