wpa_supplicant - Correction

[Howard Coles Jr.]

Does anyone know what happened to wpa_supplicant?  yesterday my wireless was 
working, (even though its gotten to where I have to manually modprobe my 
madwifi driver) however now, I can't get wpa_supplicant to load.

I'm running dapper.
wpa_supplicant version is now 0.4.8-0ubuntu1

Here's the message I receive when I enter:  wpa_supplicant -w -iath0 
-c/etc/wpa_supplicant manually:

root at homep4:/var/run# wpa_supplicant -w -iath0 -c/etc/wpa_supplicant.conf 
-Dmadwifi -d
Initializing interface 'ath0' conf '/etc/wpa_supplicant.conf' driver 'madwifi' 
ctrl_interface 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group=0
eapol_version=1
ap_scan=1
fast_reauth=1
Priority group 0
   id=0 ssid='myssid'
Initializing interface (2) 'ath0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=19 WE(source)=13 enc_capa=0xf
  capabilities: key_mgmt 0xf enc 0xf
Own MAC address: 00:00:00:00:00:00
wpa_driver_madwifi_del_key: keyidx=0
wpa_driver_madwifi_del_key: keyidx=1
wpa_driver_madwifi_del_key: keyidx=2
wpa_driver_madwifi_del_key: keyidx=3
wpa_driver_madwifi_set_countermeasures: enabled=0
wpa_driver_madwifi_set_drop_unencrypted: enabled=1
Setting scan request: 0 sec 100000 usec
Added interface ath0
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=17):
     [hexcode]   [myssid]
     37                                                7
Wireless event: cmd=0x8b1a len=26
Wireless event: cmd=0x8b19 len=8
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8b1a len=8
Wireless event: cmd=0x8b19 len=8
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=17):
     [hexcode]   [myssid]
     37                                                7
Wireless event: cmd=0x8b1a len=26
Wireless event: cmd=0x8b19 len=8
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8b1a len=8
Wireless event: cmd=0x8b19 len=8
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=17):
     [hexcode]   [myssid]
     37                                                7
Wireless event: cmd=0x8b1a len=26
Wireless event: cmd=0x8b19 len=8
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8b1a len=8
Wireless event: cmd=0x8b19 len=8
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=17):
     [hexcode]   [myssid]
     37                                                7
Wireless event: cmd=0x8b1a len=26
Wireless event: cmd=0x8b19 len=8
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8b1a len=8
Wireless event: cmd=0x8b19 len=8
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=17):
     [hexcode]   [myssid]
     37                                                7
Wireless event: cmd=0x8b1a len=26
Wireless event: cmd=0x8b19 len=8
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8b1a len=8
Wireless event: cmd=0x8b19 len=8
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=17):
     [hexcode]   [myssid]
     37                                                7
Wireless event: cmd=0x8b1a len=26
Wireless event: cmd=0x8b19 len=8
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8b1a len=8
Wireless event: cmd=0x8b19 len=8
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=17):
     [hexcode]   [myssid]
     37                                                7
Wireless event: cmd=0x8b1a len=26
Wireless event: cmd=0x8b19 len=8
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8b1a len=8
Wireless event: cmd=0x8b19 len=8
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=17):
     [hexcode]   [myssid]
     37                                                7
Wireless event: cmd=0x8b1a len=26
Wireless event: cmd=0x8b19 len=8
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8b1a len=8
Wireless event: cmd=0x8b19 len=8
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=17):
     [hexcode]   [myssid]
     37                                                7
Wireless event: cmd=0x8b1a len=26
Wireless event: cmd=0x8b19 len=8
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8b1a len=8
Wireless event: cmd=0x8b19 len=8
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=17):
     [hexcode]   [myssid]
     37                                                7
Wireless event: cmd=0x8b1a len=26
Wireless event: cmd=0x8b19 len=8
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8b1a len=8
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface ath0
State: SCANNING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_madwifi_set_drop_unencrypted: enabled=0
wpa_driver_madwifi_set_countermeasures: enabled=0
No keys have been configured - skip key clearing
Cancelling scan request


It appears that I have no /var/run/wpa_supplicant file any longer, and that 
wpa has been disabled for the driver.  My question is what should be in that 
file?  I found an /etc/default/wpasupplicant file, should I copy that 
to /var/run?

-- 

See Ya'
Howard Coles Jr.
John 3:16!

Christian Books On-Line http://risenbooks.com
http://home.comcast.net/~dhcolesj