Zire 31 working with Dapper anyone ?

[Anita Lewis]

On 08/14/2006 07:53 PM Roshan Mansinghani wrote:
> Indeed, if you are having 
> problems in kpilot, you should first make sure everything is working 
> using the pilot-link suite of tools.  PIlot-xfer is one tool from the 
> pilot-link suite.
> 

Yes, indeed.  In fact, I haven't tried anything else except pilot-xfer.

> Now, try the following and post the results:
> 
> {TYPE, do not run, the following command in the CLI}
> sudo pilot-xfer -p /dev/ttyUSB1 -l
> {Press the hotsync button, then wait 1 second, and run the above command}
> 
>

Thanks for the help!  I really thought I had this down pat after setting 
it up in Debian...


No difference:

I copied and pasted the command into an xterm
~$ sudo pilot-xfer -p /dev/ttyUSB1 -l

I then tapped the Hotsync button and waited a second (maybe two :))


    Listening to port: /dev/ttyUSB1

    Please press the HotSync button now...

--------------------------- messages ---------

Aug 14 20:51:18 localhost kernel: [17181186.436000] usb 1-2.2: new full 
speed USB device using uhci_hcd and address 6
Aug 14 20:51:18 localhost kernel: [17181186.544000] visor 1-2.2:1.0: 
Handspring Visor / Palm OS converter detected
Aug 14 20:51:18 localhost kernel: [17181186.544000] usb 1-2.2: 
Handspring Visor / Palm OS converter now attached to ttyUSB0
Aug 14 20:51:18 localhost kernel: [17181186.544000] usb 1-2.2: 
Handspring Visor / Palm OS converter now attached to ttyUSB1