[Bug 38231] Re: NEC CD-ROM drive not recognized
SilverBear
evrgreen at netsync.net
Tue Apr 18 16:36:32 UTC 2006
### ### dapper 6.06 alpha /var/log/dmesg file ### ###
[4294667.296000] Linux version 2.6.15-20-k7 (buildd at vernadsky) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 SMP PREEMPT Tue Apr 4 19:26:13 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[4294667.296000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
[4294667.296000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
[4294667.296000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)
[4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[4294667.296000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[4294667.296000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[4294667.296000] 126MB HIGHMEM available.
[4294667.296000] 896MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000f4190
[4294667.296000] On node 0 totalpages: 261872
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 225280 pages, LIFO batch:31
[4294667.296000] HighMem zone: 32496 pages, LIFO batch:7
[4294667.296000] DMI 2.2 present.
[4294667.296000] ACPI: RSDP (v000 KT600 ) @ 0x000f7cd0
[4294667.296000] ACPI: RSDT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef3040
[4294667.296000] ACPI: FADT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef30c0
[4294667.296000] ACPI: MADT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef8240
[4294667.296000] ACPI: DSDT (v001 KT600 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x4008
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 6:10 APIC version 16
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:bed00000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda9 ro quiet splash
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Detected 2008.838 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294668.590000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294668.591000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294668.627000] Memory: 1026476k/1047488k available (2083k kernel code, 20308k reserved, 595k data, 328k init, 129984k highmem)
[4294668.627000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294668.688000] Calibrating delay using timer specific routine.. 4019.68 BogoMIPS (lpj=2009842)
[4294668.688000] Security Framework v1.0.0 initialized
[4294668.688000] SELinux: Disabled at boot.
[4294668.688000] Mount-cache hash table entries: 512
[4294668.688000] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[4294668.688000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[4294668.688000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[4294668.688000] CPU: L2 Cache: 512K (64 bytes/line)
[4294668.688000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
[4294668.688000] mtrr: v2.0 (20020519)
[4294668.688000] Enabling fast FPU save and restore... done.
[4294668.688000] Enabling unmasked SIMD FPU exception support... done.
[4294668.688000] Checking 'hlt' instruction... OK.
[4294668.692000] SMP alternatives: switching to UP code
[4294668.692000] checking if image is initramfs... it is
[4294669.207000] Freeing initrd memory: 6529k freed
[4294669.223000] ACPI: Looking for DSDT ... not found!
[4294669.248000] CPU0: AMD Athlon(tm) XP 2900+ stepping 00
[4294669.248000] Total of 1 processors activated (4019.68 BogoMIPS).
[4294669.248000] ENABLING IO-APIC IRQs
[4294669.249000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294669.360000] Brought up 1 CPUs
[4294669.360000] NET: Registered protocol family 16
[4294669.360000] EISA bus registered
[4294669.360000] ACPI: bus type pci registered
[4294669.373000] PCI: PCI BIOS revision 2.10 entry at 0xf9f10, last bus=1
[4294669.373000] PCI: Using configuration type 1
[4294669.373000] ACPI: Subsystem revision 20051216
[4294669.384000] ACPI: Interpreter enabled
[4294669.384000] ACPI: Using IOAPIC for interrupt routing
[4294669.385000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294669.385000] PCI: Probing PCI hardware (bus 00)
[4294669.385000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294669.388000] Boot video device is 0000:01:00.0
[4294669.388000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294669.428000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[4294669.428000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[4294669.428000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
[4294669.429000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[4294669.429000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[4294669.429000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[4294669.430000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[4294669.430000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[4294669.431000] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
[4294669.431000] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[4294669.432000] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[4294669.432000] ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
[4294669.435000] ACPI: Power Resource [PFAN] (off)
[4294669.435000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294669.435000] pnp: PnP ACPI init
[4294669.440000] pnp: PnP ACPI: found 12 devices
[4294669.440000] PnPBIOS: Disabled by ACPI PNP
[4294669.440000] PCI: Using ACPI for IRQ routing
[4294669.440000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294669.458000] pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
[4294669.458000] pnp: 00:01: ioport range 0x5000-0x500f has been reserved
[4294669.458000] PCI: Bridge: 0000:00:01.0
[4294669.458000] IO window: disabled.
[4294669.458000] MEM window: e8000000-e9ffffff
[4294669.458000] PREFETCH window: e0000000-e7ffffff
[4294669.458000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[4294669.459000] audit: initializing netlink socket (disabled)
[4294669.459000] audit(1145361940.457:1): initialized
[4294669.459000] highmem bounce pool size: 64 pages
[4294669.459000] VFS: Disk quotas dquot_6.5.1
[4294669.459000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294669.459000] Initializing Cryptographic API
[4294669.459000] io scheduler noop registered
[4294669.459000] io scheduler anticipatory registered
[4294669.459000] io scheduler deadline registered
[4294669.459000] io scheduler cfq registered
[4294669.459000] PCI: Bypassing VIA 8237 APIC De-Assert Message
[4294669.459000] isapnp: Scanning for PnP cards...
[4294669.816000] isapnp: No Plug & Play device found
[4294669.829000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294669.829000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294669.830000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294669.830000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294669.830000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294669.831000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294669.832000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294669.832000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294669.832000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294669.832000] ACPI: bus type ide registered
[4294669.832000] mice: PS/2 mouse device common for all mice
[4294669.832000] EISA: Probing bus 0 at eisa.0
[4294669.832000] Cannot allocate resource for EISA slot 4
[4294669.832000] Cannot allocate resource for EISA slot 5
[4294669.832000] EISA: Detected 0 cards.
[4294669.832000] NET: Registered protocol family 2
[4294669.841000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294669.841000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[4294669.844000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[4294669.845000] TCP: Hash tables configured (established 131072 bind 65536)
[4294669.845000] TCP reno registered
[4294669.845000] TCP bic registered
[4294669.845000] NET: Registered protocol family 1
[4294669.845000] NET: Registered protocol family 8
[4294669.845000] NET: Registered protocol family 20
[4294669.845000] Using IPI No-Shortcut mode
[4294669.845000] ACPI wakeup devices:
[4294669.845000] SLPB PCI0 USB3 USB4 USB5 USB6 USB7 LAN0 UAR1 ECP1
[4294669.845000] ACPI: (supports S0 S3 S4 S5)
[4294669.845000] Freeing unused kernel memory: 328k freed
[4294669.855000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294669.912000] vga16fb: initializing
[4294669.912000] vga16fb: mapped to 0xc00a0000
[4294670.046000] Console: switching to colour frame buffer device 80x25
[4294670.046000] fb0: VGA16 VGA frame buffer device
[4294671.185000] Capability LSM initialized
[4294671.214000] ACPI: Fan [FAN] (off)
[4294671.217000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[4294671.223000] ACPI: Thermal Zone [THRM] (40 C)
[4294671.715000] SCSI subsystem initialized
[4294671.716000] libata version 1.20 loaded.
[4294671.718000] sata_via 0000:00:0f.0: version 1.1
[4294671.718000] **** SET: Misaligned resource pointer: df851ce2 Type 07 Len 0
[4294671.718000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[4294671.718000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169
[4294671.718000] PCI: Via IRQ fixup for 0000:00:0f.0, from 11 to 9
[4294671.718000] sata_via 0000:00:0f.0: routed to hard irq line 9
[4294671.718000] ata1: SATA max UDMA/133 cmd 0xE000 ctl 0xE102 bmdma 0xE400 irq 169
[4294671.718000] ata2: SATA max UDMA/133 cmd 0xE200 ctl 0xE302 bmdma 0xE408 irq 169
[4294672.073000] ata1: dev 0 cfg 49:2f00 82:346b 83:7fe9 84:4773 85:3469 86:3c01 87:4763 88:407f
[4294672.073000] ata1: dev 0 ATA-7, max UDMA/133, 160836480 sectors: LBA48
[4294672.073000] ata1: dev 0 configured for UDMA/133
[4294672.073000] scsi0 : sata_via
[4294672.274000] ata2: no device found (phy stat 00000000)
[4294672.274000] scsi1 : sata_via
[4294672.274000] Vendor: ATA Model: HDS728080PLA380 Rev: PF2O
[4294672.274000] Type: Direct-Access ANSI SCSI revision: 05
[4294672.280000] SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
[4294672.280000] SCSI device sda: drive cache: write back
[4294672.283000] SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
[4294672.283000] SCSI device sda: drive cache: write back
[4294672.283000] sda: sda1 sda2 sda3
[4294672.308000] sd 0:0:0:0: Attached scsi disk sda
[4294672.526000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[4294672.526000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169
[4294672.526000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9
[4294672.526000] VP_IDE: chipset revision 6
[4294672.526000] VP_IDE: not 100% native mode: will probe irqs later
[4294672.526000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[4294672.526000] ide0: BM-DMA at 0xe600-0xe607, BIOS settings: hda:DMA, hdb:DMA
[4294672.526000] ide1: BM-DMA at 0xe608-0xe60f, BIOS settings: hdc:DMA, hdd:DMA
[4294672.526000] Probing IDE interface ide0...
[4294672.912000] hda: WDC WD800JB-00FMA0, ATA DISK drive
[4294673.167000] hdb: WDC WD3200JB-00KFA0, ATA DISK drive
[4294673.218000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294673.218000] Probing IDE interface ide1...
[4294708.293000] ide1: Wait for ready failed before probe !
[4294708.874000] hdd: ST3200822A, ATA DISK drive
[4294708.925000] ide1 at 0x170-0x177,0x376 on irq 15
[4294708.931000] hda: max request size: 128KiB
[4294708.941000] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
[4294708.941000] hda: cache flushes supported
[4294708.941000] hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
[4294709.021000] hdb: max request size: 1024KiB
[4294709.031000] hdb: 625142448 sectors (320072 MB) w/8192KiB Cache, CHS=38913/255/63, UDMA(100)
[4294709.031000] hdb: cache flushes supported
[4294709.031000] hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 hdb7 hdb8 >
[4294709.088000] hdd: max request size: 1024KiB
[4294709.089000] hdd: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
[4294709.089000] hdd: cache flushes supported
[4294709.089000] hdd: hdd1 hdd2 hdd3 hdd4 < hdd5 hdd6 hdd7 hdd8 hdd9 hdd10 hdd11 hdd12 hdd13 hdd14 hdd15 hdd16 hdd17 hdd18 hdd19 hdd20 >
[4294709.291000] hdd2: <bsd: hdd21 hdd22 hdd23 hdd24 hdd25 >
[4294710.404000] usbcore: registered new driver usbfs
[4294710.404000] usbcore: registered new driver hub
[4294710.406000] USB Universal Host Controller Interface driver v2.3
[4294710.406000] **** SET: Misaligned resource pointer: df8514a2 Type 07 Len 0
[4294710.407000] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[4294710.407000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[4294710.407000] PCI: Via IRQ fixup for 0000:00:10.0, from 10 to 1
[4294710.407000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[4294710.407000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[4294710.407000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000e700
[4294710.407000] hub 1-0:1.0: USB hub found
[4294710.407000] hub 1-0:1.0: 2 ports detected
[4294710.509000] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[4294710.509000] PCI: Via IRQ fixup for 0000:00:10.1, from 10 to 1
[4294710.509000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[4294710.509000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[4294710.509000] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000e800
[4294710.509000] hub 2-0:1.0: USB hub found
[4294710.509000] hub 2-0:1.0: 2 ports detected
[4294710.610000] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[4294710.610000] PCI: Via IRQ fixup for 0000:00:10.2, from 11 to 1
[4294710.610000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[4294710.610000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[4294710.610000] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000e900
[4294710.610000] hub 3-0:1.0: USB hub found
[4294710.610000] hub 3-0:1.0: 2 ports detected
[4294710.711000] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[4294710.711000] PCI: Via IRQ fixup for 0000:00:10.3, from 11 to 1
[4294710.711000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[4294710.711000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[4294710.711000] uhci_hcd 0000:00:10.3: irq 177, io base 0x0000ea00
[4294710.711000] hub 4-0:1.0: USB hub found
[4294710.711000] hub 4-0:1.0: 2 ports detected
[4294710.814000] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[4294710.814000] PCI: Via IRQ fixup for 0000:00:10.4, from 5 to 1
[4294710.814000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[4294710.814000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[4294710.814000] ehci_hcd 0000:00:10.4: irq 177, io mem 0xea000000
[4294710.814000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294710.815000] hub 5-0:1.0: USB hub found
[4294710.815000] hub 5-0:1.0: 8 ports detected
[4294711.334000] Attempting manual resume
[4294711.359000] EXT3-fs: mounted filesystem with ordered data mode.
[4294711.376000] kjournald starting. Commit interval 5 seconds
[4294720.177000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[4294720.587000] Linux agpgart interface v0.101 (c) Dave Jones
[4294720.590000] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[4294720.597000] agpgart: AGP aperture is 128M @ 0xd8000000
[4294720.756000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294720.758000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294721.093000] Real Time Clock Driver v1.12
[4294721.157000] input: PC Speaker as /class/input/input1
[4294721.418000] nvidia: module license 'NVIDIA' taints kernel.
[4294721.423000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 185
[4294721.423000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8756 Wed Mar 29 14:26:26 PST 2006
[4294721.428000] input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
[4294721.514000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[4294721.514000] **** SET: Misaligned resource pointer: f7df54c2 Type 07 Len 0
[4294721.514000] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[4294721.514000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 193
[4294721.514000] PCI: Via IRQ fixup for 0000:00:12.0, from 10 to 1
[4294721.518000] eth0: VIA Rhine II at 0x1ec00, 00:50:8d:74:0f:19, IRQ 193.
[4294721.519000] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[4294721.749000] parport: PnPBIOS parport detected.
[4294721.749000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[4294721.988000] via82xx: Assuming DXS channels with 48k fixed sample rate.
[4294721.988000] Please try dxs_support=5 option
[4294721.988000] and report if it works on your machine.
[4294721.988000] For more details, read ALSA-Configuration.txt.
[4294721.988000] **** SET: Misaligned resource pointer: f7df5342 Type 07 Len 0
[4294721.988000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[4294721.988000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 201
[4294721.988000] PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 9
[4294721.988000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[4294721.999000] ts: Compaq touchscreen protocol output
[4294722.007000] Floppy drive(s): fd0 is 1.44M
[4294722.023000] FDC 0 is a post-1991 82077
[4294722.250000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294722.930000] lp0: using parport0 (interrupt-driven).
[4294722.981000] Adding 1365484k swap on /dev/hda5. Priority:-1 extents:1 across:1365484k
[4294723.116000] EXT3 FS on hda9, internal journal
[4294723.243000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294723.243000] md: bitmap version 4.39
[4294723.283000] NET: Registered protocol family 17
[4294724.137000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com
[4294725.202000] NET: Registered protocol family 10
[4294725.202000] lo: Disabled Privacy Extensions
[4294725.202000] IPv6 over IPv4 tunneling driver
[4294729.491000] kjournald starting. Commit interval 5 seconds
[4294729.492000] EXT3 FS on hda10, internal journal
[4294729.492000] EXT3-fs: mounted filesystem with ordered data mode.
[4294729.493000] kjournald starting. Commit interval 5 seconds
[4294729.493000] EXT3 FS on hda11, internal journal
[4294729.493000] EXT3-fs: mounted filesystem with ordered data mode.
[4294729.494000] kjournald starting. Commit interval 5 seconds
[4294729.494000] EXT3 FS on hda6, internal journal
[4294729.494000] EXT3-fs: mounted filesystem with ordered data mode.
[4294729.495000] kjournald starting. Commit interval 5 seconds
[4294729.495000] EXT3 FS on hda7, internal journal
[4294729.495000] EXT3-fs: mounted filesystem with ordered data mode.
[4294729.509000] kjournald starting. Commit interval 5 seconds
[4294729.509000] EXT3 FS on hda8, internal journal
[4294729.509000] EXT3-fs: mounted filesystem with ordered data mode.
[4294729.601000] kjournald starting. Commit interval 5 seconds
[4294729.601000] EXT3 FS on hdd6, internal journal
[4294729.601000] EXT3-fs: mounted filesystem with ordered data mode.
[4294729.612000] kjournald starting. Commit interval 5 seconds
[4294729.612000] EXT3 FS on hdd7, internal journal
[4294729.612000] EXT3-fs: mounted filesystem with ordered data mode.
[4294729.624000] kjournald starting. Commit interval 5 seconds
[4294729.624000] EXT3 FS on hdd8, internal journal
[4294729.624000] EXT3-fs: mounted filesystem with ordered data mode.
[4294729.636000] kjournald starting. Commit interval 5 seconds
[4294729.636000] EXT3 FS on hdd9, internal journal
[4294729.636000] EXT3-fs: mounted filesystem with ordered data mode.
--
NEC CD-ROM drive not recognized
https://launchpad.net/bugs/38231
More information about the kernel-bugs
mailing list