[Bug 353237] [NEW] 2:2.4.1-1ubuntu10.4 breaks resolution detection of VGA output
Andrew
andrew.rw.robinson at gmail.com
Wed Apr 1 15:48:57 UTC 2009
Public bug reported:
Binary package hint: xserver-xorg-video-intel
I have a dell 2000FP monitor that has a native resolution of 1600x1200.
It has always worked in Ubuntu, correctly displaying the 1600x1200 @
60Hz mode. That is until yesterday when I installed the
2:2.4.1-1ubuntu10.4 version of xserver-xorg-video-intel. I have this
monitor connected to work laptop at the moment (Dell Latitude D630) on
the VGA output.
Now this is my xrandr output:
VGA connected 1400x1050+0+0 (normal left inverted right x axis y axis) 367mm x 275mm
1440x900 59.9 +
1680x1050 60.0
1600x1024 60.2
1400x1050 70.0 60.0*
1280x1024 75.0 60.0 60.0
1280x960 60.0
1360x768 59.8
1152x864 75.0 75.0 75.0 70.0 60.0
1024x768 75.1 75.0 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 75.0 60.0 59.9
720x400 70.1
LVDS connected 1440x900+1400+0 (normal left inverted right x axis y axis) 304mm x 190mm
1440x900 60.0*+ 59.9
1360x768 59.8
1152x864 60.0
1024x768 60.0
800x600 60.3
640x480 59.9
As you can see, 1600x1200 is missing
Pertinent output of lspci -vv:
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
Subsystem: Dell Device 01f9
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at efe8 [size=8]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Kernel modules: intelfb
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
Subsystem: Dell Device 01f9
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
I will attempt to find the previous version of the driver and install it as this will not work at all for me.
FYI, I tried "ubuntu-bug -p xserver-xorg-video-intel", but it fails with a not implemented exception and this is printed to the console:
Error: Cannot open display ":0 -"
Exiting
This is on Ubuntu Intrepid
** Affects: xserver-xorg-video-intel (Ubuntu)
Importance: Undecided
Status: New
--
2:2.4.1-1ubuntu10.4 breaks resolution detection of VGA output
https://bugs.launchpad.net/bugs/353237
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs at lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
More information about the universe-bugs
mailing list