[ubuntu-za] Ubuntu VPN Server pptpd

Thu Jan 31 12:55:35 GMT 2008

Besides I get this when i run what you say
SIOCADDRT: Invalid argument


On 31/01/2008, Mark Stockton <mark at linuxworx.co.za> wrote:
>
> Hi Glenn
>
> Try adding something like the following to your /etc/network/interfaces
> file
> and restarting the networking.
>
> up route add -net 192.6.31.253 gw 192.8.41.1 dev eth1
>
> This command might require some tuning as I've just thumbsucked it from
> memory.
>
> Regards
>
> Mark
>
> "The difference between genius and stupidity is that genius has it's
> limits."
>                 -- Albert Einstein
>
> ---------- Original Message -----------
> From: "Glenn S" <glennlinuxmail at gmail.com>
> To: "Post Ubuntu Users" <ubuntu-users at lists.ubuntu.com>, "Post ubuntu ZA"
> <ubuntu-za at lists.ubuntu.com>
> Sent: Thu, 31 Jan 2008 14:23:40 +0200
> Subject: [ubuntu-za] Ubuntu VPN Server pptpd
>
> > Hello All, I am a little lost at the moment trying to get my vpn server
> > working correctly.
> > I can connect to it via a MS vpn into the box fine. Once i am
> > connected to it I cannot see the rest of the network. Any help would
> > be handy. I know it is something to do with a route / setting in a
> > file somewhere, not sure which or what.
> >
> > Let me give you the scenario.
> >
> > 2 interfaces ETH1 and ETH2
> > ETH 2 - WAN to router
> > ETH1 - LAN to Network. Now there is one thing i want access to
> > mainly on the network and that is our Terminal Server on
> > 192.6.31.253 How do I get the Home PC once connected to see that server?
> >
> > /etc/network/interfaces
> > auto lo eth1 eth2
> > iface lo inet loopback
> >
> > iface eth1 inet static
> > address 192.8.41.18
> > netmask 255.255.255.0
> > gateway 192.8.41.1
> >
> > iface eth2 inet static
> > address 192.6.32.220
> > netmask 255.255.255.0
> > gateway 192.6.32.246
> >
> > /etc/pptpd.conf
> >
> ###############################################################################
> > # $Id: pptpd.conf 4255 2004-10-03 18:44:00Z rene $
> > #
> > # Sample Poptop configuration file /etc/pptpd.conf
> > #
> > # Changes are effective when pptpd is restarted.
> >
> ###############################################################################
> > # TAG: ppp
> > #    Path to the pppd program, default '/usr/sbin/pppd' on Linux
> > #
> > #ppp /usr/sbin/pppd
> > # TAG: option
> > #    Specifies the location of the PPP options file.
> > #    By default PPP looks in '/etc/ppp/options'
> > #
> > option    /etc/ppp/options.pptpd
> > # TAG: debug
> > #    Turns on (more) debugging to syslog
> > #
> > #debug
> > # TAG: stimeout
> > #    Specifies timeout (in seconds) on starting ctrl connection
> > #
> > # stimeout 10
> > # TAG: noipparam
> > #       Suppress the passing of the client's IP address to PPP, which is
> > #       done by default otherwise.
> > #
> > #noipparam
> > # TAG: logwtmp
> > #    Use wtmp(5) to record client connections and disconnections.
> > #
> > # logwtmp        ## comment this out!! broken deb package!!
> > # TAG: bcrelay
> > #    Turns on broadcast relay to clients from interface
> > #
> > #bcrelay eth1
> > # TAG: localip
> > # TAG: remoteip
> > #    Specifies the local and remote IP address ranges.
> > #
> > #       Any addresses work as long as the local machine takes care of
> the
> > #       routing.  But if you want to use MS-Windows networking, you
> should
> > #       use IP addresses out of the LAN address space and use the
> proxyarp
> > #       option in the pppd options file, or run bcrelay.
> > #
> > #    You can specify single IP addresses seperated by commas or you can
> > #    specify ranges, or both. For example:
> > #
> > #        192.168.0.234,192.168.0.245-249,192.168.0.254
> > #
> > #    IMPORTANT RESTRICTIONS:
> > #
> > #    1. No spaces are permitted between commas or within addresses.
> > #
> > #    2. If you give more IP addresses than MAX_CONNECTIONS, it will
> > #       start at the beginning of the list and go until it gets
> > #       MAX_CONNECTIONS IPs. Others will be ignored.
> > #
> > #    3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,
> > #       you must type 234-238 if you mean this.
> > #
> > #    4. If you give a single localIP, that's ok - all local IPs will
> > #       be set to the given one. You MUST still give at least one remote
> > #       IP for each simultaneous client.
> > #
> > # (Recommended)
> > localip    192.6.32.220
> > remoteip    192.6.32.221-225
> > # or
> > #localip 192.168.0.234-238,192.168.0.245
> > #remoteip 192.168.1.234-238,192.168.1.245
> >
> > /etc/ppp/options.pptpd
> > lock
> > ms-dns 192.6.32.220
> > ms-wins 192.6.32.220
> > debug
> > name pptp-vpn
> > auth
> > proxyarp
> > refuse-pap
> > refuse-chap
> > refuse-mschap
> > require-mschap-v2
> > require-mppe-128
> > chapms-strip-domain
> > lcp-echo-failure 10
> > lcp-echo-interval 30
> > nobsdcomp
> >
> > Output of netstat -rn
> > Kernel IP routing table
> > Destination     Gateway         Genmask         Flags   MSS Window  irtt
> > Iface
> > 192.6.31.0      192.8.41.1      255.255.255.0   UG        0 0
> >   0 eth1 192.8.41.0      0.0.0.0         255.255.255.0   U         0
> > 0          0 eth1 192.8.40.0      192.8.41.19     255.255.255.0   UG
> >        0 0          0 eth1 192.8.39.0      192.8.41.1
> > 255.255.255.0   UG        0 0          0 eth1 192.6.32.0
> >  0.0.0.0         255.255.255.0   U         0 0          0 eth2
> > 0.0.0.0         192.6.32.246    0.0.0.0         UG        0 0
> >   0 eth2
> > 0.0.0.0         192.8.41.1      0.0.0.0         UG        0 0
> >   0 eth1
> >
> > Thank you for any help - please ask if you need more information
> > ta
> ------- End of Original Message -------
>
>
> --
> ubuntu-za mailing list
> ubuntu-za at lists.ubuntu.com
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-za
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://lists.ubuntu.com/archives/ubuntu-za/attachments/20080131/cb6a7b46/attachment.htm