18.04 has no support for my printer

Charles Irons irons.charles at gmail.com
Wed Oct 17 06:29:12 UTC 2018


Hello Colin

I did the tail command with the results:
chas at Charles-PC:~$ tail -f /var/log/syslog
Oct 17 08:18:50 Charles-PC gvfsd-metadata[1767]:
g_udev_device_has_property: assertion 'G_UDEV_IS_DEVICE (device)' failed
Oct 17 08:18:50 Charles-PC gvfsd-metadata[1767]:
g_udev_device_has_property: assertion 'G_UDEV_IS_DEVICE (device)' failed
Oct 17 08:18:50 Charles-PC org.gnome.Shell.desktop[1693]: Window manager
warning: Overwriting existing binding of keysym 73 with keysym 73 (keycode
27).
Oct 17 08:20:19 Charles-PC kernel: [ 6906.220644] [UFW BLOCK] IN=eth0 OUT=
MAC=01:00:5e:00:00:01:98:de:d0:e7:d6:68:08:00 SRC=192.168.0.1 DST=224.0.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
Oct 17 08:20:33 Charles-PC kernel: [ 6920.379125] usb 3-3: USB disconnect,
device number 3
Oct 17 08:20:33 Charles-PC upowerd[1199]: unhandled action 'unbind' on
/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3
Oct 17 08:20:34 Charles-PC kernel: [ 6921.088725] [UFW BLOCK] IN=eth0 OUT=
MAC= SRC=fe80:0000:0000:0000:da79:0040:0449:cca6
DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1
FLOWLBL=269381 PROTO=UDP SPT=8612 DPT=8612 LEN=24
Oct 17 08:20:34 Charles-PC kernel: [ 6921.088735] [UFW BLOCK] IN=eth0 OUT=
MAC= SRC=fe80:0000:0000:0000:da79:0040:0449:cca6
DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1
FLOWLBL=149996 PROTO=UDP SPT=8612 DPT=8610 LEN=24
Oct 17 08:20:34 Charles-PC kernel: [ 6921.098884] [UFW BLOCK] IN=eth0 OUT=
MAC= SRC=fe80:0000:0000:0000:da79:0040:0449:cca6
DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1
FLOWLBL=269381 PROTO=UDP SPT=8612 DPT=8612 LEN=24
Oct 17 08:20:34 Charles-PC kernel: [ 6921.098894] [UFW BLOCK] IN=eth0 OUT=
MAC= SRC=fe80:0000:0000:0000:da79:0040:0449:cca6
DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1
FLOWLBL=149996 PROTO=UDP SPT=8612 DPT=8610 LEN=24

*********************** connected printer**********

Oct 17 08:21:51 Charles-PC kernel: [ 6998.107486] usb 3-3: new high-speed
USB device number 4 using xhci_hcd
Oct 17 08:21:51 Charles-PC kernel: [ 6998.256093] usb 3-3: New USB device
found, idVendor=03f0, idProduct=c111
Oct 17 08:21:51 Charles-PC kernel: [ 6998.256095] usb 3-3: New USB device
strings: Mfr=1, Product=2, SerialNumber=3
Oct 17 08:21:51 Charles-PC kernel: [ 6998.256096] usb 3-3: Product: Deskjet
1510 series
Oct 17 08:21:51 Charles-PC kernel: [ 6998.256097] usb 3-3: Manufacturer: HP
Oct 17 08:21:51 Charles-PC kernel: [ 6998.256098] usb 3-3: SerialNumber:
CN43B1D1DC05XJ
Oct 17 08:21:51 Charles-PC kernel: [ 6998.257201] usblp 3-3:1.1: usblp0:
USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0xC111
Oct 17 08:21:51 Charles-PC root: loading HP Device 003 004
Oct 17 08:21:51 Charles-PC python: io/hpmud/musb.c 2189: [5639]
hpmud_make_usb_uri() bus=003 dev=004
Oct 17 08:21:51 Charles-PC python: io/hpmud/musb.c 2287:
hpmud_make_usb_uri() uri=hp:/usb/Deskjet_1510_series?serial=CN43B1D1DC05XJ
bytes_read=49
Oct 17 08:21:51 Charles-PC colord[1028]: CdMain: failed to emit
DeviceAdded: failed to register object: An object is already exported for
the interface org.freedesktop.ColorManager.Device at
/org/freedesktop/ColorManager/devices/sysfs_HP_Deskjet_1510_series
Oct 17 08:21:51 Charles-PC kernel: [ 6998.792366] [UFW BLOCK] IN=eth0 OUT=
MAC= SRC=fe80:0000:0000:0000:da79:0040:0449:cca6
DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1
FLOWLBL=269381 PROTO=UDP SPT=8612 DPT=8612 LEN=24
Oct 17 08:21:51 Charles-PC kernel: [ 6998.792380] [UFW BLOCK] IN=eth0 OUT=
MAC= SRC=fe80:0000:0000:0000:da79:0040:0449:cca6
DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1
FLOWLBL=149996 PROTO=UDP SPT=8612 DPT=8610 LEN=24
Oct 17 08:21:51 Charles-PC kernel: [ 6998.802492] [UFW BLOCK] IN=eth0 OUT=
MAC= SRC=fe80:0000:0000:0000:da79:0040:0449:cca6
DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1
FLOWLBL=269381 PROTO=UDP SPT=8612 DPT=8612 LEN=24
Oct 17 08:21:51 Charles-PC kernel: [ 6998.802501] [UFW BLOCK] IN=eth0 OUT=
MAC= SRC=fe80:0000:0000:0000:da79:0040:0449:cca6
DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1
FLOWLBL=149996 PROTO=UDP SPT=8612 DPT=8610 LEN=24
Oct 17 08:21:51 Charles-PC colord-sane: io/hpmud/musb.c 2101: Invalid
usb_open: Permission denied
Oct 17 08:21:51 Charles-PC colord-sane: io/hpmud/musb.c 2101: Invalid
usb_open: Permission denied
Oct 17 08:21:51 Charles-PC upowerd[1199]: unhandled action 'bind' on
/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1
Oct 17 08:21:51 Charles-PC colord-sane: io/hpmud/musb.c 2101: Invalid
usb_open: Permission denied
Oct 17 08:21:51 Charles-PC upowerd[1199]: unhandled action 'bind' on
/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3
Oct 17 08:22:04 Charles-PC dhclient[1428]: DHCPREQUEST of 192.168.0.104 on
eth0 to 192.168.0.1 port 67 (xid=0x2c652a01)
Oct 17 08:22:04 Charles-PC dhclient[1428]: DHCPACK of 192.168.0.104 from
192.168.0.1
Oct 17 08:22:04 Charles-PC NetworkManager[910]: <info>  [1539757324.5604]
dhcp4 (eth0):   address 192.168.0.104
Oct 17 08:22:04 Charles-PC NetworkManager[910]: <info>  [1539757324.5604]
dhcp4 (eth0):   plen 24 (255.255.255.0)
Oct 17 08:22:04 Charles-PC NetworkManager[910]: <info>  [1539757324.5604]
dhcp4 (eth0):   gateway 192.168.0.1
Oct 17 08:22:04 Charles-PC NetworkManager[910]: <info>  [1539757324.5605]
dhcp4 (eth0):   lease time 7200
Oct 17 08:22:04 Charles-PC NetworkManager[910]: <info>  [1539757324.5605]
dhcp4 (eth0):   nameserver '192.168.0.1'
Oct 17 08:22:04 Charles-PC NetworkManager[910]: <info>  [1539757324.5605]
dhcp4 (eth0): state changed bound -> bound
Oct 17 08:22:04 Charles-PC dbus-daemon[903]: [system] Activating via
systemd: service name='org.freedesktop.nm_dispatcher'
unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.20'
(uid=0 pid=910 comm="/usr/sbin/NetworkManager --no-daemon "
label="unconfined")
Oct 17 08:22:04 Charles-PC systemd[1]: Starting Network Manager Script
Dispatcher Service...
Oct 17 08:22:04 Charles-PC dbus-daemon[903]: [system] Successfully
activated service 'org.freedesktop.nm_dispatcher'
Oct 17 08:22:04 Charles-PC systemd[1]: Started Network Manager Script
Dispatcher Service.
Oct 17 08:22:04 Charles-PC nm-dispatcher: req:1 'dhcp4-change' [eth0]: new
request (1 scripts)
Oct 17 08:22:04 Charles-PC nm-dispatcher: req:1 'dhcp4-change' [eth0]:
start running ordered scripts...
Oct 17 08:22:04 Charles-PC dhclient[1428]: bound to 192.168.0.104 --
renewal in 3350 seconds.
Oct 17 08:22:24 Charles-PC kernel: [ 7031.199201] [UFW BLOCK] IN=eth0 OUT=
MAC=01:00:5e:00:00:01:98:de:d0:e7:d6:68:08:00 SRC=192.168.0.1 DST=224.0.0.1
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
^C
chas at Charles-PC:~$
************************
I see errors but hope they help you fix next step.
Take care. Chas

irons.charles at gmail.com
 Mobile +2783 588 0028


On Tue, 16 Oct 2018 at 21:53, Colin Law <clanlaw at gmail.com> wrote:

> On Tue, 16 Oct 2018 at 20:32, Charles Irons <irons.charles at gmail.com>
> wrote:
>
> > So I do not know what else to try.
>
> Unplug the printer from the PC, then in a terminal run
> tail -f /var/log/syslog
> That will show the end of the system log and will sit waiting for more
> logs.  Hit enter a couple of times so you get a gap in the text.  Now plug
> the printer into the PC.  Copy/paste here what you see added to the
> terminal.  To copy from the terminal use Ctrl-Shift-C.  When you have done
> you can type Ctrl-C in the terminal to break out of the tail command.
>
> Colin
> --
> ubuntu-users mailing list
> ubuntu-users at lists.ubuntu.com
> Modify settings or unsubscribe at:
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/ubuntu-users/attachments/20181017/8a1994c6/attachment.html>


More information about the ubuntu-users mailing list