Printer won't initialize

[Chris]

On Tue, 2015-01-27 at 20:27 +0000, Colin Law wrote:
> On 27 January 2015 at 20:17, Chris <cpollock at embarqmail.com> wrote:
> > This is really beginning to get my goat. Seems like every time I turn around I'm having some kind of
> > an issue. Now my HP 1020 Laserjet won't initialize. The last time a successful print job was run was
> > Mon 26 Jan 2015 04:54:09 PM CST according to the CUPS Job Manager.  I'm seeing this in dmesg:
> >
> > Jan 27 11:32:34 localhost kernel: [   16.860019] usb 2-6: device descriptor read/64, error -110
> 
> I presume you have tried a power cycle (including powering down the
> printer at the same time).
> Otherwise, have you changed anything on the system since it last
> worked, switched to a different kernel for example?
> 
> Colin
> 
> > Jan 27 11:32:34 localhost kernel: [   32.088017] usb 2-6: device descriptor read/64, error -110
> > Jan 27 11:32:34 localhost kernel: [   32.316019] usb 2-6: new high-speed USB device number 3 using ehci-pci
> >
> > Jan 27 11:35:09 localhost hp[3101]: prnt/backend/hp.c 808: ERROR: open
> > device failed stat=12: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC
> >
> > Jan 27 11:26:55 localhost hp[18533]: io/hpmud/musb.c 1143: unable to
> > open hp:/usb/HP_LaserJet_1020?serial=JL1F0DC
> > Jan 27 11:26:55 localhost hp[18533]: prnt/backend/hp.c 808: ERROR: open
> > device failed stat=12: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC
> > Jan 27 11:28:32 localhost hp[18610]: io/hpmud/musb.c 1143: unable to
> > open hp:/usb/HP_LaserJet_1020?serial=JL1F0DC
> > Jan 27 11:28:32 localhost hp[18610]: prnt/backend/hp.c 808: ERROR: open
> > device failed stat=12: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC
> > Jan 27 11:28:59 localhost hp[18632]: io/hpmud/musb.c 1143: unable to
> > open hp:/usb/HP_LaserJet_1020?serial=JL1F0DC
> > Jan 27 11:28:59 localhost hp[18632]: prnt/backend/hp.c 808: ERROR: open
> > device failed stat=12: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC
> > Jan 27 11:29:19 localhost hp[18647]: io/hpmud/musb.c 1143: unable to
> > open hp:/usb/HP_LaserJet_1020?serial=JL1F0DC
> > Jan 27 11:29:19 localhost hp[18647]: prnt/backend/hp.c 808: ERROR: open
> > device failed stat=12: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC
> > Jan 27 11:29:42 localhost hp[18666]: io/hpmud/musb.c 1143: unable to
> > open hp:/usb/HP_LaserJet_1020?serial=JL1F0DC
> > Jan 27 11:29:42 localhost hp[18666]: prnt/backend/hp.c 808: ERROR: open
> > device failed stat=12: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC
> > Jan 27 11:30:07 localhost hp[18679]: io/hpmud/musb.c 1143: unable to
> > open hp:/usb/HP_LaserJet_1020?serial=JL1F0DC
> > Jan 27 11:30:07 localhost hp[18679]: prnt/backend/hp.c 808: ERROR: open
> > device failed stat=12: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC
> >
> > Basically the printer for some reason will not initialize since yesterday evening (I just
> > noticed it this morning). I've changed to another USB port and instead of
> > usb 2-6: device descriptor read/64, error -110 I get usb 2-5 which makes sense since I
> > changed to a different port. Bottom line, I have no idea what the heck is going on or
> > where or how to figure out how to fix it. Any assistance is appreciated.
> >
Colin, I unplugged the printer, booted then plugged in during the boot.
The printer initialized however when trying to print something the print
job starts according to HPLIP report then says completed however nothing
prints. Also says device error can't connect. All I've done as far as
changing kernels is to go from the 3.19 back to the 3.13 for a little
while.

-- 
Chris
KeyID 0xE372A7DA98E6705C
31.11°N 97.89°W (Elev. 1092 ft)
16:27:53 up 5 min, 1 user, load average: 2.65, 2.28, 1.07
Ubuntu 14.04.1 LTS, kernel 3.19.0-031900rc5-generic