configure static ip address with yast

[Thufir]

I'm trying to configure a server, which uses yast, with a static ip 
address.  

ip:  192.168.0.15
subnet: 255.255.255.0
hostname:  foo.bar.com  (not actual, of course)

on yast, should it change the host name via DHP, or loopback IP?

for the domain search, that's google.com?  Or, do they mean, in this 
case, that noip.com manages the DNS lookup for the hostname?

I was looking for "yast print all config" but haven't yet found that 
option, I'm reading the fine manual on it :)



another computer on the network:



thufir at ix:~$ 
thufir at ix:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:24:1d:aa:19:75  
          inet addr:192.168.0.13  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::224:1dff:feaa:1975/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:181254 errors:0 dropped:0 overruns:0 frame:0
          TX packets:99971 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:123974549 (123.9 MB)  TX bytes:14352081 (14.3 MB)
          Interrupt:17 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:13871 errors:0 dropped:0 overruns:0 frame:0
          TX packets:13871 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:1517339 (1.5 MB)  TX bytes:1517339 (1.5 MB)

thufir at ix:~$ 
thufir at ix:~$ ethtool eth0
Settings for eth0:
	Supported ports: [ TP ]
	Supported link modes:   10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	                        1000baseT/Half 1000baseT/Full 
	Supported pause frame use: No
	Supports auto-negotiation: Yes
	Advertised link modes:  10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	                        1000baseT/Half 1000baseT/Full 
	Advertised pause frame use: No
	Advertised auto-negotiation: No
	Speed: 100Mb/s
	Duplex: Full
	Port: Twisted Pair
	PHYAD: 0
	Transceiver: internal
	Auto-negotiation: on
	MDI-X: Unknown
Cannot get wake-on-lan settings: Operation not permitted
	Current message level: 0x000000ff (255)
			       drv probe link timer ifdown ifup rx_err 
tx_err
	Link detected: yes
thufir at ix:~$ 




thanks,

Thufir