lspci on 12.04 not showing hauppauge PVR-150 no video devices.

[Colin Law]

On 3 June 2013 03:40, Mike McMullin <mwmcmlln at mnsi.net> wrote:
> I'm trying to migrate to newer hardware, and the newer stuff is on
> 12.04, I've moved my Hauppage PVR-150 card and it doesn't show up when I
> do an lspci, and there are no video devices which should occour here are
> some outputs:  (I do have ivtv-utils installed)
> root at front-main:/home/mike# lspci
> ...

> 03:06.0 Multimedia video controller: Gammagraphx, Inc. (or missing ID)
> Device 8210 (rev 01)

What is that?  On 12.04 my PVR150 shows
01:0a.0 Multimedia video controller: Internext Compression Inc iTVC16
(CX23416) Video Decoder (rev 01)

Does
dmesg | grep ivtv
show anything, mine gives
[    9.022925] ivtv: Start initialization, version 1.4.3
[    9.023234] ivtv0: Initializing card 0
[    9.023239] ivtv0: Autodetected Hauppauge card (cx23416 based)
[    9.026465] ivtv 0000:01:0a.0: PCI INT A -> Link[LNKC] -> GSI 18
(level, low) -> IRQ 18
[    9.079488] ivtv0: Autodetected Hauppauge WinTV PVR-150
[    9.129376] cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
[    9.231769] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
[    9.257047] ivtv0: Registered device video0 for encoder MPG (4096 kB)
[    9.257089] ivtv0: Registered device video32 for encoder YUV (2048 kB)
[    9.257126] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
[    9.257160] ivtv0: Registered device video24 for encoder PCM (320 kB)
[    9.257194] ivtv0: Registered device radio0 for encoder radio
[    9.257197] ivtv0: Initialized card: Hauppauge WinTV PVR-150
[    9.257238] ivtv: End initialization
[   10.340312] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
[   10.540158] ivtv0: Encoder revision: 0x02060039

Colin