(2nd try) ubuntu 12.04LTS: sometime won't detect my iphone4s!

ping songpingemail at gmail.com
Fri Nov 23 20:39:19 UTC 2012


for unknown reason it works now:

sudofdisk -l

Disk /dev/sdb: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0005f6f4

    Device Boot      Start         End      Blocks   Id System
/dev/sdb1              63   102398309    51199123+  83 Linux
/dev/sdb2       102398310   102494699       48195   83 Linux
/dev/sdb3       102494700   204893009    51199155   83 Linux
/dev/sdb4       204893010  1250258624   522682807+  83 Linux


and still I have the same "not ready" thing, so that turns out to be not 
related...

[51548.316007] ipheth 1-1.1:4.2: Apple iPhone USB Ethernet device attached
[51548.496016] ADDRCONF(NETDEV_UP): eth0: link is not ready
[51548.496510] ADDRCONF(NETDEV_UP): eth0: link is not ready





On 11/22/2012 10:48 AM, ping wrote:
>
> On 11/22/2012 10:29 AM, Colin Law wrote:
>> On 22 November 2012 15:09, ping <songpingemail at gmail.com> wrote:
>>> On 11/22/2012 03:41 AM, Colin Law wrote:
>>>> On 21 November 2012 21:09, ping <songpingemail at gmail.com> wrote:
>>>>> On 11/13/2012 04:44 PM, ping wrote:
>>>>>> folks:
>>>>>> not sure you guys expericence the same,  sometime my iphone4s 
>>>>>> can't be
>>>>>> recognized when I connect the USB cable into ubuntu PC.
>>>>>> previously I had similiar issue with blackberry and in that case 
>>>>>> can be
>>>>>> constantly resolved by:
>>>>>>       $ sudo modprobe -r usb_storage
>>>>>>       $ sudo modprobe usb_storage
>>>>>>
>>>>>> but now this doesn't work, any known solutions?
>>>>>>
>>>>>> thanks!
>>>>>> regards
>>>>>> ping
>>>>>
>>>>> guys, anyone can help here?
>>>> Does running dmesg in a terminal tell you anything useful (in the case
>>>> that it does not work).  Run dmesg then plug it in and run dmesg again
>>>> and see what new messages have been added.
>>>>
>>>> Colin
>>>>
>>> thanks Colin,
>>> I'm really confused here, what does it has anything to do with eth0?
>>> yes the iphone looks been detected here, but fdisk detected nothing.
>>> how to proceed now?
>> fdisk?  What command are you running?
>
> here is the command of fdisk
> $ sudo fdisk -l
> currently my disk was marked and detected as sda1, and I expect to see 
> sdb1 or sth else appears for the new device attached, but there is 
> nothing...
>>
>>> [11786.566321] usb 2-1.1: new high-speed USB device number 6 using 
>>> ehci_hcd
>>> [11786.799690] ipheth 2-1.1:4.2: Apple iPhone USB Ethernet device 
>>> attached
>>> [11786.866078] ADDRCONF(NETDEV_UP): eth0: link is not ready
>>> [11786.866980] ADDRCONF(NETDEV_UP): eth0: link is not ready
>> It appears to be trying to attach it as a ethernet device.  What do
>> you see when it does connect ok?  I don't know about the iphone, can
>> it be used via the usb in different modes?  Maybe someone with more
>> detailed knowledge of the iphone can help.
> thanks, I didn't even check it with more info when it worked...
>>
>> Colin
>>
>> Colin
>>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/ubuntu-users/attachments/20121123/ab0b3aac/attachment.html>


More information about the ubuntu-users mailing list