When dpkg install a package, when popularity-contest work, when I copy a file on Hard Disk, I can't use my computer, all interfaces are freeze

[Pop Horea-Vasile]

On 09/20/2011 05:08 PM, Stéphane Klein wrote:
> Le 20/09/2011 16:02, Pop Horea-Vasile a écrit :
>> Did you opened Disk utility and saw what is the health status of HDD ?
>
> Do you speak about smartctl ?
>
> $ sudo smartctl /dev/sda --all
> smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build)
> Copyright (C) 2002-10 by Bruce Allen, 
> http://smartmontools.sourceforge.net
>
> === START OF INFORMATION SECTION ===
> Model Family:     Fujitsu MHY2 BH series
> Device Model:     FUJITSU MHY2160BH
> Serial Number:    K43AT7B26SGM
> Firmware Version: 0081000D
> User Capacity:    160 041 885 696 bytes
> Device is:        In smartctl database [for details use: -P show]
> ATA Version is:   8
> ATA Standard is:  ATA-8-ACS revision 3f
> Local Time is:    Tue Sep 20 16:07:46 2011 CEST
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
>
> General SMART Values:
> Offline data collection status:  (0x00)    Offline data collection 
> activity
>                     was never started.
>                     Auto Offline Data Collection: Disabled.
> Self-test execution status:      (   0)    The previous self-test 
> routine completed
>                     without error or no self-test has ever
>                     been run.
> Total time to complete Offline
> data collection:          ( 649) seconds.
> Offline data collection
> capabilities:              (0x7b) SMART execute Offline immediate.
>                     Auto Offline data collection on/off support.
>                     Suspend Offline collection upon new
>                     command.
>                     Offline surface scan supported.
>                     Self-test supported.
>                     Conveyance Self-test supported.
>                     Selective Self-test supported.
> SMART capabilities:            (0x0003)    Saves SMART data before 
> entering
>                     power-saving mode.
>                     Supports SMART auto save timer.
> Error logging capability:        (0x01)    Error logging supported.
>                     General Purpose Logging supported.
> Short self-test routine
> recommended polling time:      (   2) minutes.
> Extended self-test routine
> recommended polling time:      (  92) minutes.
> Conveyance self-test routine
> recommended polling time:      (   2) minutes.
> SCT capabilities:            (0x003d)    SCT Status supported.
>                     SCT Error Recovery Control supported.
>                     SCT Feature Control supported.
>                     SCT Data Table supported.
>
> SMART Attributes Data Structure revision number: 16
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE UPDATED  
> WHEN_FAILED RAW_VALUE
>   1 Raw_Read_Error_Rate     0x000f   100   100   046    Pre-fail 
> Always       -       0
>   2 Throughput_Performance  0x0005   100   100   030    Pre-fail 
> Offline      -       0
>   3 Spin_Up_Time            0x0003   100   100   025    Pre-fail 
> Always       -       0
>   4 Start_Stop_Count        0x0032   098   098   000    Old_age 
> Always       -       6257
>   5 Reallocated_Sector_Ct   0x0033   100   100   024    Pre-fail 
> Always       -       0
>   7 Seek_Error_Rate         0x000f   100   100   047    Pre-fail 
> Always       -       0
>   8 Seek_Time_Performance   0x0005   100   100   019    Pre-fail 
> Offline      -       0
>   9 Power_On_Hours          0x0032   085   085   000    Old_age 
> Always       -       7846
>  10 Spin_Retry_Count        0x0013   100   100   020    Pre-fail 
> Always       -       0
>  12 Power_Cycle_Count       0x0032   100   100   000    Old_age 
> Always       -       2419
> 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   
> Always       -       17180196986
> 193 Load_Cycle_Count        0x0032   095   095   000    Old_age   
> Always       -       110002
> 194 Temperature_Celsius     0x0022   100   100   000    Old_age   
> Always       -       35 (Lifetime Min/Max 13/55)
> 195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   
> Always       -       0
> 196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   
> Always       -       0
> 197 Current_Pending_Sector  0x0012   100   100   000    Old_age   
> Always       -       0
> 198 Offline_Uncorrectable   0x0010   100   100   000    Old_age 
> Offline      -       0
> 199 UDMA_CRC_Error_Count    0x003e   200   253   000    Old_age   
> Always       -       0
> 200 Multi_Zone_Error_Rate   0x000f   100   100   060    Pre-fail  
> Always       -       0
> 203 Run_Out_Cancel          0x0002   100   100   000    Old_age   
> Always       -       0
> 240 Transfer_Error_Rate     0x003e   200   200   000    Old_age   
> Always       -       0
>
> SMART Error Log Version: 1
> No Errors Logged
>
> SMART Self-test log structure revision number 1
> No self-tests have been logged.  [To run self-tests, use: smartctl -t]
>
>
> SMART Selective self-test log data structure revision number 1
>  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
>     1        0        0  Not_testing
>     2        0        0  Not_testing
>     3        0        0  Not_testing
>     4        0        0  Not_testing
>     5        0        0  Not_testing
> Selective self-test flags (0x0):
>   After scanning selected spans, do NOT read-scan remainder of disk.
> If Selective self-test is pending on power-up, resume after 0 minute 
> delay.
>
>
No. Searchin the menu for apllication Disk Utility. It is wtih GUI and 
you can do things like mount or unmount or see the health status of HDD. 
It is in the right corner of GUI.