When dpkg install a package, when popularity-contest work, when I copy a file on Hard Disk, I can't use my computer, all interfaces are freeze

[Stéphane Klein]

Le 20/09/2011 16:02, Pop Horea-Vasile a écrit :
> Did you opened Disk utility and saw what is the health status of HDD ?

Do you speak about smartctl ?

$ sudo smartctl /dev/sda --all
smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Fujitsu MHY2 BH series
Device Model:     FUJITSU MHY2160BH
Serial Number:    K43AT7B26SGM
Firmware Version: 0081000D
User Capacity:    160 041 885 696 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 3f
Local Time is:    Tue Sep 20 16:07:46 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine 
completed
					without error or no self-test has ever
					been run.
Total time to complete Offline
data collection: 		 ( 649) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  92) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE 
UPDATED  WHEN_FAILED RAW_VALUE
   1 Raw_Read_Error_Rate     0x000f   100   100   046    Pre-fail 
Always       -       0
   2 Throughput_Performance  0x0005   100   100   030    Pre-fail 
Offline      -       0
   3 Spin_Up_Time            0x0003   100   100   025    Pre-fail 
Always       -       0
   4 Start_Stop_Count        0x0032   098   098   000    Old_age 
Always       -       6257
   5 Reallocated_Sector_Ct   0x0033   100   100   024    Pre-fail 
Always       -       0
   7 Seek_Error_Rate         0x000f   100   100   047    Pre-fail 
Always       -       0
   8 Seek_Time_Performance   0x0005   100   100   019    Pre-fail 
Offline      -       0
   9 Power_On_Hours          0x0032   085   085   000    Old_age 
Always       -       7846
  10 Spin_Retry_Count        0x0013   100   100   020    Pre-fail 
Always       -       0
  12 Power_Cycle_Count       0x0032   100   100   000    Old_age 
Always       -       2419
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always 
       -       17180196986
193 Load_Cycle_Count        0x0032   095   095   000    Old_age   Always 
       -       110002
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always 
       -       35 (Lifetime Min/Max 13/55)
195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always 
       -       0
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always 
       -       0
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always 
       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age 
Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   253   000    Old_age   Always 
       -       0
200 Multi_Zone_Error_Rate   0x000f   100   100   060    Pre-fail  Always 
       -       0
203 Run_Out_Cancel          0x0002   100   100   000    Old_age   Always 
       -       0
240 Transfer_Error_Rate     0x003e   200   200   000    Old_age   Always 
       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
     1        0        0  Not_testing
     2        0        0  Not_testing
     3        0        0  Not_testing
     4        0        0  Not_testing
     5        0        0  Not_testing
Selective self-test flags (0x0):
   After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


-- 
Stéphane Klein <stephane at harobed.org>
blog: http://stephane-klein.info
Twitter: http://twitter.com/klein_stephane
pro: http://www.is-webdesign.com