E100 Driver

[Christopher Chan]

On Saturday, November 06, 2010 03:20 PM, Joshua Wambua wrote:
> Output of dmesg | grep e100, cat /etc/modprobe.conf, mii-tool
>
> 1. dmesg | grep e100
> 	[    0.223241] pci 0000:02:08:0 Firmware left e100 interrupts
> enabled; disabling
> 	[    1.243888] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
> 	[    1.243892] e100: Copyright(x) 1999-2006 Intel Corporation
> 	[    1.243928] e100 0000:02:08.0: PCI INT A ->  GSI 20 (level, low)
> ->  IRQ 20
> 	[    1.271516] e100 0000:02:08.0: PME# disabled
> 	[    1.278460] e100: eth0: e100_probe: addr 0xf0101000, irq 20, MAC
> addr 00:1b:38:93:dc:71
>
> 2. cat /etc/modprobe.conf
> 	cat: /etc/modprobe.conf: No such file or directory
>
> 3. mii-tool
> 	eth0: negotiated 100baseTx-FD flow-control, link ok
>
>
>

Boy...that means everything checks out...

How is it configured on the Windows side? dhcp? static?

What do you get from ifconfig -a, route -n, cat /etc.resolv.conf?