Huawei EC1260 Modem on ubuntu 9.10
Yagnesh Desai
yndesai at gmail.com
Fri Jan 8 16:12:57 UTC 2010
Thanks Patton;
I am using 8.04 and tried dmesg
but it did not detect the modem.
I tried 9.04 liveCD and its working I
have decided to use 9.04 since I found
out there people are complaining about 9.10
and this modem.
Attached is the dmesg from 9.04 output for
the record.
- - - - -
Best regards
Yagnesh Desai
Save a tree...please don't print this e-mail.
-------------- next part --------------
[ 0.000000] BIOS EBDA/lowmem at: 0009f000/0009f000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-11-generic (buildd at palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001f6e0000 (usable)
[ 0.000000] BIOS-e820: 000000001f6e0000 - 000000001f6f5000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001f6f5000 - 000000001f700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x1f6e0 max_arch_pfn = 0x100000
[ 0.000000] Scanning 2 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable)
[ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000092000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d0000 - 00000000000d4000 (reserved)
[ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000001f6e0000 (usable)
[ 0.000000] modified: 000000001f6e0000 - 000000001f6f5000 (ACPI data)
[ 0.000000] modified: 000000001f6f5000 - 000000001f700000 (ACPI NVS)
[ 0.000000] modified: 000000001f700000 - 0000000020000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000f0008000 - 00000000f000c000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 1f6e0000 @ 10000-16000
[ 0.000000] RAMDISK: 1ef4c000 - 1f6af993
[ 0.000000] ACPI: RSDP 000F6BA0, 0024 (r2 IBM )
[ 0.000000] ACPI: XSDT 1F6E739B, 005C (r1 IBM TP-70 1260 LTP 0)
[ 0.000000] ACPI: FACP 1F6E7400, 00F4 (r3 IBM TP-70 1260 IBM 1)
[ 0.000000] ACPI Warning (tbfadt-0460): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080926]
[ 0.000000] ACPI: DSDT 1F6E75E7, D75F (r1 IBM TP-70 1260 MSFT 100000E)
[ 0.000000] ACPI: FACS 1F6F6000, 0040
[ 0.000000] ACPI: SSDT 1F6E75B4, 0033 (r1 IBM TP-70 1260 MSFT 100000E)
[ 0.000000] ACPI: ECDT 1F6F4D46, 0052 (r1 IBM TP-70 1260 IBM 1)
[ 0.000000] ACPI: TCPA 1F6F4D98, 0032 (r1 IBM TP-70 1260 PTL 1)
[ 0.000000] ACPI: APIC 1F6F4DCA, 005A (r1 IBM TP-70 1260 IBM 1)
[ 0.000000] ACPI: MCFG 1F6F4E24, 003E (r1 IBM TP-70 1260 IBM 1)
[ 0.000000] ACPI: BOOT 1F6F4FD8, 0028 (r1 IBM TP-70 1260 LTP 1)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 502MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1f6e0000
[ 0.000000] low ram: 00000000 - 1f6e0000
[ 0.000000] bootmap 00012000 - 00015edc
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001f6e0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c]
[ 0.000000] #4 [001ef4c000 - 001f6af993] RAMDISK ==> [001ef4c000 - 001f6af993]
[ 0.000000] #5 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000]
[ 0.000000] #6 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #8 [0000012000 - 0000016000] BOOTMAP ==> [0000012000 - 0000016000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001f6e0
[ 0.000000] HighMem 0x0001f6e0 -> 0x0001f6e0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x00000007
[ 0.000000] 0: 0x00000010 -> 0x00000092
[ 0.000000] 0: 0x00000100 -> 0x0001f6e0
[ 0.000000] On node 0 totalpages: 128613
[ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3941 pages, LIFO batch:0
[ 0.000000] Normal zone: 974 pages used for memmap
[ 0.000000] Normal zone: 123666 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 0000000000092000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127607
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1496.000 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] allocated 2574720 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 491880k/514944k available (4126k kernel code, 22292k reserved, 2208k data, 532k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xdfee0000 - 0xff3fe000 ( 501 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xdf6e0000 ( 502 MB)
[ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
[ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.004012] Calibrating delay loop (skipped), value calculated using timer frequency.. 2992.00 BogoMIPS (lpj=5984000)
[ 0.004033] Security Framework initialized
[ 0.004043] SELinux: Disabled at boot.
[ 0.004066] AppArmor: AppArmor initialized
[ 0.004075] Mount-cache hash table entries: 512
[ 0.004227] Initializing cgroup subsys ns
[ 0.004232] Initializing cgroup subsys cpuacct
[ 0.004236] Initializing cgroup subsys memory
[ 0.004241] Initializing cgroup subsys freezer
[ 0.004260] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004263] CPU: L2 cache: 1024K
[ 0.004276] Checking 'hlt' instruction... OK.
[ 0.020830] SMP alternatives: switching to UP code
[ 0.151789] Freeing SMP alternatives: 18k freed
[ 0.151795] ACPI: Core revision 20080926
[ 0.158970] ACPI: Checking initramfs for custom DSDT
[ 0.580594] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.621848] CPU0: Intel(R) Celeron(R) M processor 1.50GHz stepping 08
[ 0.624002] Brought up 1 CPUs
[ 0.624002] Total of 1 processors activated (2992.00 BogoMIPS).
[ 0.624002] CPU0 attaching NULL sched-domain.
[ 0.624002] net_namespace: 776 bytes
[ 0.624002] Booting paravirtualized kernel on bare hardware
[ 0.624002] Time: 20:59:17 Date: 01/08/10
[ 0.624002] regulator: core version 0.5
[ 0.624002] NET: Registered protocol family 16
[ 0.624002] EISA bus registered
[ 0.624002] ACPI: bus type pci registered
[ 0.624002] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.624002] PCI: MCFG area at e0000000 reserved in E820
[ 0.624002] PCI: Using MMCONFIG for extended config space
[ 0.624002] PCI: Using configuration type 1 for base access
[ 0.624002] ACPI: EC: EC description table is found, configuring boot EC
[ 0.633880] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.640972] ACPI: Interpreter enabled
[ 0.640977] ACPI: (supports S0 S3 S4 S5)
[ 0.641003] ACPI: Using IOAPIC for interrupt routing
[ 0.656774] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.656778] ACPI: EC: driver started in interrupt mode
[ 0.660649] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.660669] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.660764] pci 0000:00:02.0: reg 10 32bit mmio: [0x90080000-0x900fffff]
[ 0.660770] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
[ 0.660776] pci 0000:00:02.0: reg 18 32bit mmio: [0xb0000000-0xbfffffff]
[ 0.660782] pci 0000:00:02.0: reg 1c 32bit mmio: [0x90000000-0x9003ffff]
[ 0.660815] pci 0000:00:02.1: reg 10 32bit mmio: [0x000000-0x07ffff]
[ 0.660940] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.660948] pci 0000:00:1c.0: PME# disabled
[ 0.661018] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.661024] pci 0000:00:1c.2: PME# disabled
[ 0.661090] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[ 0.661153] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[ 0.661215] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[ 0.661279] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
[ 0.661346] pci 0000:00:1d.7: reg 10 32bit mmio: [0x90040000-0x900403ff]
[ 0.661394] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.661400] pci 0000:00:1d.7: PME# disabled
[ 0.661497] pci 0000:00:1e.2: reg 10 io port: [0x1c00-0x1cff]
[ 0.661506] pci 0000:00:1e.2: reg 14 io port: [0x18c0-0x18ff]
[ 0.661515] pci 0000:00:1e.2: reg 18 32bit mmio: [0x90040800-0x900409ff]
[ 0.661524] pci 0000:00:1e.2: reg 1c 32bit mmio: [0x90040400-0x900404ff]
[ 0.661554] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[ 0.661559] pci 0000:00:1e.2: PME# disabled
[ 0.661662] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.661672] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.661677] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.661716] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.661724] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.661733] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.661741] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.661750] pci 0000:00:1f.2: reg 20 io port: [0x1810-0x181f]
[ 0.661776] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.661781] pci 0000:00:1f.2: PME# disabled
[ 0.661845] pci 0000:00:1f.3: reg 20 io port: [0x18a0-0x18bf]
[ 0.661957] pci 0000:02:00.0: reg 10 64bit mmio: [0x90100000-0x9010ffff]
[ 0.662016] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.662023] pci 0000:02:00.0: PME# disabled
[ 0.662090] pci 0000:00:1c.0: bridge 32bit mmio: [0x90100000-0x901fffff]
[ 0.662155] pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff]
[ 0.662161] pci 0000:00:1c.2: bridge 32bit mmio: [0x90200000-0x902fffff]
[ 0.662170] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xc0000000-0xc00fffff]
[ 0.662225] pci 0000:04:00.0: reg 10 32bit mmio: [0x90300000-0x90300fff]
[ 0.662240] pci 0000:04:00.0: supports D1 D2
[ 0.662243] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.662249] pci 0000:04:00.0: PME# disabled
[ 0.662305] pci 0000:04:02.0: reg 10 32bit mmio: [0x90301000-0x90301fff]
[ 0.662368] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold
[ 0.662375] pci 0000:04:02.0: PME# disabled
[ 0.662441] pci 0000:00:1e.0: transparent bridge
[ 0.662447] pci 0000:00:1e.0: bridge io port: [0x3000-0x6fff]
[ 0.662453] pci 0000:00:1e.0: bridge 32bit mmio: [0x90300000-0x9fffffff]
[ 0.662462] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xc8000000-0xcfffffff]
[ 0.662510] bus 00 -> node 0
[ 0.662519] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.662810] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.663000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.663196] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.667463] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.667763] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.668068] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.668364] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.668659] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.668956] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.669256] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.669555] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.669705] ACPI: Power Resource [PUBS] (on)
[ 0.669705] ACPI: WMI: Mapper loaded
[ 0.669705] SCSI subsystem initialized
[ 0.669705] libata version 3.00 loaded.
[ 0.669705] usbcore: registered new interface driver usbfs
[ 0.669705] usbcore: registered new interface driver hub
[ 0.669705] usbcore: registered new device driver usb
[ 0.669705] PCI: Using ACPI for IRQ routing
[ 0.669705] Expanded resource reserved due to conflict with Adapter ROM
[ 0.669705] Bluetooth: Core ver 2.13
[ 0.669705] NET: Registered protocol family 31
[ 0.669705] Bluetooth: HCI device and connection manager initialized
[ 0.669705] Bluetooth: HCI socket layer initialized
[ 0.669705] NET: Registered protocol family 8
[ 0.669705] NET: Registered protocol family 20
[ 0.669705] NetLabel: Initializing
[ 0.669705] NetLabel: domain hash size = 128
[ 0.669705] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.669705] NetLabel: unlabeled traffic allowed by default
[ 0.669705] hpet clockevent registered
[ 0.669705] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.669705] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.669705] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.676091] AppArmor: AppArmor Filesystem Enabled
[ 0.676101] pnp: PnP ACPI init
[ 0.676101] ACPI: bus type pnp registered
[ 0.681468] pnp: PnP ACPI: found 14 devices
[ 0.681471] ACPI: ACPI bus type pnp unregistered
[ 0.681476] PnPBIOS: Disabled by ACPI PNP
[ 0.681489] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.681492] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
[ 0.681496] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
[ 0.681499] system 00:00: iomem range 0xc8000-0xcbfff has been reserved
[ 0.681503] system 00:00: iomem range 0xcc000-0xcffff could not be reserved
[ 0.681506] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
[ 0.681510] system 00:00: iomem range 0xdc000-0xdffff could not be reserved
[ 0.681513] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
[ 0.681517] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
[ 0.681520] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
[ 0.681524] system 00:00: iomem range 0xec000-0xeffff could not be reserved
[ 0.681527] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.681531] system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
[ 0.681535] system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.681544] system 00:02: ioport range 0x1000-0x107f has been reserved
[ 0.681548] system 00:02: ioport range 0x1180-0x11bf has been reserved
[ 0.681551] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[ 0.681555] system 00:02: ioport range 0x1600-0x1641 has been reserved
[ 0.681558] system 00:02: ioport range 0x1644-0x167f has been reserved
[ 0.681562] system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.681566] system 00:02: iomem range 0xf0008000-0xf000bfff has been reserved
[ 0.681570] system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.681574] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.681577] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.716347] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.716350] pci 0000:00:1c.0: IO window: disabled
[ 0.716357] pci 0000:00:1c.0: MEM window: 0x90100000-0x901fffff
[ 0.716363] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.716371] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
[ 0.716376] pci 0000:00:1c.2: IO window: 0x2000-0x2fff
[ 0.716383] pci 0000:00:1c.2: MEM window: 0x90200000-0x902fffff
[ 0.716389] pci 0000:00:1c.2: PREFETCH window: 0x000000c0000000-0x000000c00fffff
[ 0.716400] pci 0000:04:00.0: CardBus bridge, secondary bus 0000:05
[ 0.716403] pci 0000:04:00.0: IO window: 0x003000-0x0030ff
[ 0.716409] pci 0000:04:00.0: IO window: 0x003400-0x0034ff
[ 0.716416] pci 0000:04:00.0: PREFETCH window: 0xc8000000-0xcbffffff
[ 0.716423] pci 0000:04:00.0: MEM window: 0x94000000-0x97ffffff
[ 0.716430] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.716434] pci 0000:00:1e.0: IO window: 0x3000-0x6fff
[ 0.716441] pci 0000:00:1e.0: MEM window: 0x90300000-0x9fffffff
[ 0.716447] pci 0000:00:1e.0: PREFETCH window: 0x000000c8000000-0x000000cfffffff
[ 0.716471] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.716477] pci 0000:00:1c.0: setting latency timer to 64
[ 0.716488] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.716494] pci 0000:00:1c.2: setting latency timer to 64
[ 0.716503] pci 0000:00:1e.0: setting latency timer to 64
[ 0.716516] pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.716524] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.716527] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.716530] bus: 02 index 0 mmio: [0x0-0x0]
[ 0.716532] bus: 02 index 1 mmio: [0x90100000-0x901fffff]
[ 0.716535] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.716537] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.716540] bus: 03 index 0 io port: [0x2000-0x2fff]
[ 0.716543] bus: 03 index 1 mmio: [0x90200000-0x902fffff]
[ 0.716545] bus: 03 index 2 mmio: [0xc0000000-0xc00fffff]
[ 0.716548] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.716551] bus: 04 index 0 io port: [0x3000-0x6fff]
[ 0.716553] bus: 04 index 1 mmio: [0x90300000-0x9fffffff]
[ 0.716556] bus: 04 index 2 mmio: [0xc8000000-0xcfffffff]
[ 0.716559] bus: 04 index 3 io port: [0x00-0xffff]
[ 0.716561] bus: 04 index 4 mmio: [0x000000-0xffffffff]
[ 0.716564] bus: 05 index 0 io port: [0x3000-0x30ff]
[ 0.716567] bus: 05 index 1 io port: [0x3400-0x34ff]
[ 0.716570] bus: 05 index 2 mmio: [0xc8000000-0xcbffffff]
[ 0.716573] bus: 05 index 3 mmio: [0x94000000-0x97ffffff]
[ 0.716586] NET: Registered protocol family 2
[ 0.716718] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.716988] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.717105] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.717216] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.717219] TCP reno registered
[ 0.717315] NET: Registered protocol family 1
[ 0.717476] checking if image is initramfs... it is
[ 1.172111] Switched to high resolution mode on CPU 0
[ 1.548723] Freeing initrd memory: 7566k freed
[ 1.548783] Simple Boot Flag at 0x35 set to 0x1
[ 1.548824] cpufreq: No nForce2 chipset.
[ 1.549022] audit: initializing netlink socket (disabled)
[ 1.549066] type=2000 audit(1262984357.548:1): initialized
[ 1.558746] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.560370] VFS: Disk quotas dquot_6.5.1
[ 1.560440] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.561206] fuse init (API version 7.10)
[ 1.561314] msgmni has been set to 976
[ 1.561541] alg: No test for stdrng (krng)
[ 1.561557] io scheduler noop registered
[ 1.561560] io scheduler anticipatory registered
[ 1.561562] io scheduler deadline registered
[ 1.561582] io scheduler cfq registered (default)
[ 1.561600] pci 0000:00:02.0: Boot video device
[ 1.569514] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.569566] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.569604] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X
[ 1.569621] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.569643] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.569658] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.569735] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 1.569784] pcieport-driver 0000:00:1c.2: found MSI capability
[ 1.569817] pcieport-driver 0000:00:1c.2: irq 2302 for MSI/MSI-X
[ 1.569833] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 1.569853] pci_express 0000:00:1c.2:pcie02: allocate port service
[ 1.569868] pci_express 0000:00:1c.2:pcie03: allocate port service
[ 1.569957] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.570041] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.570523] ACPI: AC Adapter [AC] (on-line)
[ 1.599871] ACPI: Battery Slot [BAT0] (battery present)
[ 1.599962] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.599965] ACPI: Power Button (FF) [PWRF]
[ 1.600029] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.600513] ACPI: Lid Switch [LID]
[ 1.600574] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.600580] ACPI: Sleep Button (CM) [SLPB]
[ 1.601647] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.601682] processor ACPI_CPU:00: registered as cooling_device0
[ 1.601687] ACPI: Processor [CPU] (supports 8 throttling states)
[ 1.608391] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.610143] ACPI: Thermal Zone [THM0] (52 C)
[ 1.610199] isapnp: Scanning for PnP cards...
[ 1.964383] isapnp: No Plug & Play device found
[ 1.965727] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.966883] serial 00:0a: activated
[ 1.967013] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 1.967960] brd: module loaded
[ 1.968342] loop: module loaded
[ 1.968428] Fixed MDIO Bus: probed
[ 1.968436] PPP generic driver version 2.4.2
[ 1.968510] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 1.968548] Driver 'sd' needs updating - please use bus_type methods
[ 1.968559] Driver 'sr' needs updating - please use bus_type methods
[ 1.968608] ahci 0000:00:1f.2: version 3.0
[ 1.968634] ahci: probe of 0000:00:1f.2 failed with error -22
[ 1.968681] ata_piix 0000:00:1f.2: version 2.12
[ 1.968689] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 2.124046] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.124148] scsi0 : ata_piix
[ 2.124262] scsi1 : ata_piix
[ 2.125639] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 2.125643] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 2.288441] ata1.00: ATA-6: FUJITSU MHV2040AH, 00840096, max UDMA/100
[ 2.288445] ata1.00: 78140160 sectors, multi 16: LBA
[ 2.288462] ata1.00: applying bridge limits
[ 2.304459] ata1.00: configured for UDMA/100
[ 2.468443] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4244N, 1.02, max UDMA/33
[ 2.484407] ata2.00: configured for UDMA/33
[ 2.485024] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2040A 0084 PQ: 0 ANSI: 5
[ 2.485144] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 2.485165] sd 0:0:0:0: [sda] Write Protect is off
[ 2.485168] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.485199] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.485277] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 2.485294] sd 0:0:0:0: [sda] Write Protect is off
[ 2.485297] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.485326] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.485333] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
[ 2.971354] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.971414] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.973886] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4244N 1.02 PQ: 0 ANSI: 5
[ 2.975983] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 2.975987] Uniform CD-ROM driver Revision: 3.20
[ 2.976105] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.976152] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.976917] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.977404] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 2.977421] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.977445] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.977450] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.977544] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.981463] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.981472] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.981492] ehci_hcd 0000:00:1d.7: irq 19, io mem 0x90040000
[ 2.996011] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.996096] usb usb1: configuration #1 chosen from 1 choice
[ 2.996129] hub 1-0:1.0: USB hub found
[ 2.996139] hub 1-0:1.0: 8 ports detected
[ 2.996277] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.996300] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.996724] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 2.996731] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.996740] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.996745] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.996803] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.996840] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
[ 2.996928] usb usb2: configuration #1 chosen from 1 choice
[ 2.996958] hub 2-0:1.0: USB hub found
[ 2.996966] hub 2-0:1.0: 2 ports detected
[ 2.997441] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 2.997450] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.997457] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.997461] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.997511] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.997546] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
[ 2.997632] usb usb3: configuration #1 chosen from 1 choice
[ 2.997665] hub 3-0:1.0: USB hub found
[ 2.997673] hub 3-0:1.0: 2 ports detected
[ 2.997769] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.997777] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.997781] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.997839] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.997873] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 2.997963] usb usb4: configuration #1 chosen from 1 choice
[ 2.997992] hub 4-0:1.0: USB hub found
[ 2.998000] hub 4-0:1.0: 2 ports detected
[ 2.998098] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.998107] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.998111] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.998164] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.998190] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
[ 2.998299] usb usb5: configuration #1 chosen from 1 choice
[ 2.998329] hub 5-0:1.0: USB hub found
[ 2.998337] hub 5-0:1.0: 2 ports detected
[ 2.998488] usbcore: registered new interface driver libusual
[ 2.998529] usbcore: registered new interface driver usbserial
[ 2.998544] USB Serial support registered for generic
[ 2.998562] usbcore: registered new interface driver usbserial_generic
[ 2.998565] usbserial: USB Serial Driver core
[ 2.998631] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 3.006003] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.006011] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.006145] mice: PS/2 mouse device common for all mice
[ 3.006336] rtc_cmos 00:06: RTC can wake from S4
[ 3.006386] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 3.006421] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.006511] device-mapper: uevent: version 1.0.3
[ 3.006656] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel at redhat.com
[ 3.006715] device-mapper: multipath: version 1.0.5 loaded
[ 3.006718] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.006831] EISA: Probing bus 0 at eisa.0
[ 3.006840] Cannot allocate resource for EISA slot 1
[ 3.006844] Cannot allocate resource for EISA slot 2
[ 3.006847] Cannot allocate resource for EISA slot 3
[ 3.006850] Cannot allocate resource for EISA slot 4
[ 3.006852] Cannot allocate resource for EISA slot 5
[ 3.006855] Cannot allocate resource for EISA slot 6
[ 3.006866] EISA: Detected 0 cards.
[ 3.006948] cpuidle: using governor ladder
[ 3.007036] cpuidle: using governor menu
[ 3.007647] TCP cubic registered
[ 3.007769] NET: Registered protocol family 10
[ 3.008256] lo: Disabled Privacy Extensions
[ 3.008616] NET: Registered protocol family 17
[ 3.008639] Bluetooth: L2CAP ver 2.11
[ 3.008641] Bluetooth: L2CAP socket layer initialized
[ 3.008644] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.008646] Bluetooth: SCO socket layer initialized
[ 3.008691] Bluetooth: RFCOMM socket layer initialized
[ 3.008703] Bluetooth: RFCOMM TTY layer initialized
[ 3.008705] Bluetooth: RFCOMM ver 1.10
[ 3.008757] Using IPI No-Shortcut mode
[ 3.008858] registered taskstats version 1
[ 3.008985] Magic number: 10:134:1003
[ 3.008999] block sda5: hash matches
[ 3.009032] vc vcs: hash matches
[ 3.009036] input input0: hash matches
[ 3.009045] pnp 00:05: hash matches
[ 3.009109] rtc_cmos 00:06: setting system clock to 2010-01-08 20:59:19 UTC (1262984359)
[ 3.009113] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.009116] EDD information not available.
[ 3.009473] Freeing unused kernel memory: 532k freed
[ 3.009615] Write protecting the kernel text: 4128k
[ 3.009663] Write protecting the kernel read-only data: 1532k
[ 3.013183] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3.094077] compcache: Compressed swap size set to: 125072 KB
[ 3.094319] TLSF: pool: dffe6000, init_size=16384, max_size=0, grow_size=16384
[ 3.594496] Floppy drive(s): fd0 is 1.44M
[ 3.611274] FDC 0 is a National Semiconductor PC87306
[ 3.668387] tg3.c:v3.94 (August 14, 2008)
[ 3.668409] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.668423] tg3 0000:02:00.0: setting latency timer to 64
[ 3.712244] eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:11:25:d8:87:ca
[ 3.712250] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 3.712253] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 3.957129] Adding 125068k swap on /dev/ramzswap0. Priority:100 extents:1 across:125068k
[ 4.024184] Marking TSC unstable due to TSC halts in idle
[ 4.668046] Clocksource tsc unstable (delta = -218569774 ns)
[ 4.847014] kjournald starting. Commit interval 5 seconds
[ 4.847028] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.001566] kjournald starting. Commit interval 5 seconds
[ 5.001579] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.634118] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 5.719661] ISO 9660 Extensions: RRIP_1991A
[ 6.041507] aufs 20080922
[ 6.288811] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 70.199697] udev: starting version 141
[ 72.069605] Non-volatile memory driver v1.2
[ 72.115578] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 72.346678] intel_rng: FWH not detected
[ 72.413106] ieee80211_crypt: registered algorithm 'NULL'
[ 72.503023] Linux agpgart interface v0.103
[ 72.648587] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 72.885114] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 72.885119] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno at linux.intel.com>
[ 72.924402] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/input/input6
[ 72.952216] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 73.030850] irda_init()
[ 73.030872] NET: Registered protocol family 23
[ 73.094689] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 73.095131] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 73.099579] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[ 73.196587] thinkpad_acpi: ThinkPad ACPI Extras v0.21
[ 73.196591] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 73.196594] thinkpad_acpi: ThinkPad BIOS 70ET66WW (1.26 ), EC 70HT28WW-1.05
[ 73.196597] thinkpad_acpi: IBM ThinkPad R52, model 1858MQ8
[ 73.201111] Registered led device: tpacpi::thinklight
[ 73.201458] Registered led device: tpacpi::power
[ 73.201507] Registered led device: tpacpi:orange:batt
[ 73.201554] Registered led device: tpacpi:green:batt
[ 73.201601] Registered led device: tpacpi::dock_active
[ 73.201648] Registered led device: tpacpi::bay_active
[ 73.201695] Registered led device: tpacpi::dock_batt
[ 73.201741] Registered led device: tpacpi::unknown_led
[ 73.201794] Registered led device: tpacpi::standby
[ 73.205579] thinkpad_acpi: fan_init: initial fan status is unknown, assuming it is in auto mode
[ 73.205806] input: ThinkPad Extra Buttons as /devices/virtual/input/input7
[ 73.239240] iTCO_vendor_support: vendor-support=0
[ 73.287176] parport_pc 00:0b: reported by Plug and Play ACPI
[ 73.287234] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 73.350748] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 73.350753] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 73.356453] yenta_cardbus 0000:04:00.0: CardBus bridge found [1014:0528]
[ 73.356483] yenta_cardbus 0000:04:00.0: Using INTVAL to route CSC interrupts to PCI
[ 73.356486] yenta_cardbus 0000:04:00.0: Routing CardBus interrupts to PCI
[ 73.356493] yenta_cardbus 0000:04:00.0: TI: mfunc 0x01d21002, devctl 0x64
[ 73.360289] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 73.360471] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 73.360586] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 73.515710] ppdev: user-space parallel port driver
[ 73.567066] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
[ 73.567074] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 73.578372] nsc-ircc 00:0c: activated
[ 73.578378] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
[ 73.578436] nsc-ircc, chip->init
[ 73.578450] nsc-ircc, Found chip at base=0x02e
[ 73.578487] nsc-ircc, driver loaded (Dag Brattli)
[ 73.579363] IrDA: Registered device irda0
[ 73.579366] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[ 73.589065] yenta_cardbus 0000:04:00.0: ISA IRQ mask 0x0c30, PCI irq 16
[ 73.589072] yenta_cardbus 0000:04:00.0: Socket status: 30000007
[ 73.589080] yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x6fff
[ 73.589084] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x6fff: clean.
[ 73.590289] yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge Memory window: 0x90300000 - 0x9fffffff
[ 73.590294] yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge Memory window: 0xc8000000 - 0xcfffffff
[ 73.598047] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 73.607390] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 73.607460] ipw2200 0000:04:02.0: firmware: requesting ipw2200-bss.fw
[ 73.656799] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 73.910051] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 73.910147] Intel ICH 0000:00:1e.2: setting latency timer to 64
[ 74.140810] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[ 74.259678] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 74.261434] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 74.262173] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 74.262792] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 74.263602] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 74.832197] intel8x0_measure_ac97_clock: measured 55236 usecs
[ 74.832202] intel8x0: clocking to 48000
[ 74.973502] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 76.314232] psmouse serio2: ID: 10 00 64<6>Adding 763520k swap on /dev/sda5. Priority:-1 extents:1 across:763520k
[ 80.101261] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 80.320055] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
[ 86.972943] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 86.972948] Bluetooth: BNEP filters: protocol multicast
[ 87.027636] Bridge firewalling registered
[ 92.823667] lp0: using parport0 (interrupt-driven).
[ 94.563966] [drm] Initialized drm 1.1.0 20060810
[ 94.613476] pci 0000:00:02.0: power state changed by ACPI to D0
[ 94.613489] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 94.613495] pci 0000:00:02.0: setting latency timer to 64
[ 94.613725] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 94.618792] [drm:i915_setparam] *ERROR* unknown parameter 4
[ 94.618825] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 95.734603] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 96.165442] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 106.196033] eth1: no IPv6 routers present
[ 118.565517] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 161.948054] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 162.132298] usb 3-2: configuration #1 chosen from 1 choice
[ 162.280160] Initializing USB Mass Storage driver...
[ 162.283157] usb-storage: probe of 3-2:1.0 failed with error -1
[ 162.283191] usbcore: registered new interface driver usb-storage
[ 162.283195] USB Mass Storage support registered.
[ 162.524107] usb 3-2: USB disconnect, address 2
[ 162.764082] usb 3-2: new full speed USB device using uhci_hcd and address 3
[ 162.928253] usb 3-2: configuration #1 chosen from 1 choice
[ 162.974573] usb-storage: probe of 3-2:1.0 failed with error -5
[ 162.978838] usb-storage: probe of 3-2:1.1 failed with error -5
[ 162.982479] usb-storage: probe of 3-2:1.2 failed with error -5
[ 162.987208] usb-storage: probe of 3-2:1.3 failed with error -1
[ 162.993856] USB Serial support registered for GSM modem (1-port)
[ 162.993904] option 3-2:1.0: GSM modem (1-port) converter detected
[ 162.994028] usb 3-2: GSM modem (1-port) converter now attached to ttyUSB0
[ 162.994048] option 3-2:1.1: GSM modem (1-port) converter detected
[ 162.994103] usb 3-2: GSM modem (1-port) converter now attached to ttyUSB1
[ 162.994115] option 3-2:1.2: GSM modem (1-port) converter detected
[ 162.994167] usb 3-2: GSM modem (1-port) converter now attached to ttyUSB2
[ 162.994185] usbcore: registered new interface driver option
[ 162.994189] option: v0.7.2:USB Driver for GSM modems
[ 327.297639] PPP BSD Compression module registered
[ 327.318691] PPP Deflate Compression module registered
[ 401.405916] PPP: VJ decompression error
[ 401.485961] PPP: VJ decompression error
[ 401.585940] PPP: VJ decompression error
[ 1319.994722] PPP: VJ decompression error
[ 1320.094718] PPP: VJ decompression error
[ 1320.175720] PPP: VJ decompression error
[ 1320.254713] PPP: VJ decompression error
More information about the ubuntu-users
mailing list