Can't mount external USB HDD drive :(

[Florian Diesch]

alecs <alecs.box at gmail.com> writes:

> Hi all! Can someone help with such a problem ...
>
> When i plug in my usb drive /dev/sdc1 is not generated at all!
> Only /dev/sdc :(
> This device works ok in 9.04. Everything ok with my kingston usb flash 4
> Gb stick. 
> 	Also should notice that i had to install from alternate, cause desktop
> installer didn't see my Seagate 320Gb sata drive(not usb, internal
> drive)
>
> dmesg says:
> [ 145.840719] scsi 7:0:0:0: Direct-Access StoreJet Transcend PQ: 0 ANSI:
> 2 CCS
> [ 145.841044] sd 7:0:0:0: Attached scsi generic sg3 type 0
> [ 145.843331] sd 7:0:0:0: [sdc] 625142448 512-byte logical blocks: (320
> GB/298 GiB)
> [ 145.844421] sd 7:0:0:0: [sdc] Write Protect is off
> [ 145.844424] sd 7:0:0:0: [sdc] Mode Sense: 34 00 00 00
> [ 145.844426] sd 7:0:0:0: [sdc] Assuming drive cache: write through
> [ 145.845955] sd 7:0:0:0: [sdc] Assuming drive cache: write through
> [ 145.845963] sdc: sdc1
> [ 145.870826] sd 7:0:0:0: [sdc] Assuming drive cache: write through
> [ 145.870830] sd 7:0:0:0: [sdc] Attached SCSI disk
> [ 146.387521] device-mapper: table: 252:0: striped: Couldn't parse
> stripe destination
> [ 146.387524] device-mapper: ioctl: error adding target to table
>
> blkid /dev/sdc
> /dev/sdc: TYPE="nvidia_raid_member"
>
> cat /proc/scsi/usb-storage/7 
> Host scsi7: usb-storage
> Vendor: JMicron
> Product: StoreJet Transcend
> Serial Number: 33271F131A00
> Protocol: Transparent SCSI
> Transport: Bulk
> Quirks:

Please post the output of
  devkit-disks --dump
with your USB Flash attached


   Florian
-- 
<http://www.florian-diesch.de/software/shell-scripts/>