Scan/Kooka/Samsung clx-2160

[Osman Kemal Kadiroğlu]

Hi,

I am using a AMD64 / Kubuntu 8.04 computer. I tried to connect it to a
Samsung clx-2160 laser printer/scanner. Printer work without any problems.
Scanner is a totally different story. Sane and Kooka did not see any
scanner. When I tried to install the drivers that is given in the web page
of Samsung this tien I cannot run both softwares. With Sane I get a small
window telling that it is looking for a scanner for few seconds and then
disappears. with Kooka I get:

(no debugging symbols found)
[Thread debugging using libthread_db enabled]
[New Thread 0x7ffc5389b6f0 (LWP 8308)]
[KCrash handler]
#5  0x00007ffc498cace0 in ?? () from /usr/lib/libmfp.so
#6  0x00007ffc498cc64a in m_parport_ECP_supported () from /usr/lib/libmfp.so
#7  0x00007ffc498cca77 in port_init () from /usr/lib/libmfp.so
#8  0x00007ffc498ccb8b in dpa_init () from /usr/lib/libmfp.so
#9  0x00007ffc498c6c15 in mfp_get_devices () from /usr/lib/libmfp.so
#10 0x00007ffc49a15251 in port::init_mfp_port_control ()
   from /usr/lib/sane/libsane-smfp.so.1
#11 0x00007ffc49a06a09 in device::init_mfp_port_control ()
   from /usr/lib/sane/libsane-smfp.so.1
#12 0x00007ffc49a08e99 in driver::init_mfp_port_control ()
   from /usr/lib/sane/libsane-smfp.so.1
#13 0x00007ffc49a052a4 in backend::init ()
   from /usr/lib/sane/libsane-smfp.so.1
#14 0x00007ffc49a04d01 in sane_smfp_init ()
   from /usr/lib/sane/libsane-smfp.so.1
#15 0x00007ffc4eb1ed30 in init (be=0x826b80) at dll.c:613
#16 0x00007ffc4eb1f023 in sane_dll_get_devices (device_list=0x7ffc5250be30,
    local_only=0) at dll.c:1034
#17 0x00007ffc522e33fa in KScanDevice::KScanDevice ()
   from /usr/lib/libkscan.so.1
#18 0x000000000043beab in ?? ()
#19 0x000000000043c56b in ?? ()
#20 0x0000000000449a92 in ?? ()
#21 0x00007ffc515cb1c4 in __libc_start_main () from /lib/libc.so.6
#22 0x0000000000424609 in ?? ()
#23 0x00007fff5b8d4d58 in ?? ()
#24 0x0000000000000000 in ?? ()

When I ask sane to search for a scanner I get:

oyo at oyo-kubuntu:~$ sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure
that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x04e8, product=0x3425) at libusb:004:002
  # Your USB scanner was (probably) detected. It may or may not be supported
by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.

What am I suppose to do to correct these errors and be able to scan?

Many thanks
-- 
Osman Kemal Kadiroglu
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/ubuntu-users/attachments/20080627/54ac8d7e/attachment.html>