Change in bios and I cant boot now

[Wade Smart]

Ray Parrish wrote:
> Hello,
> 
> You need to open the computer case, [observe anti-static precautions 
> <http://www.kitchentablecomputers.com/static.htm>] locate the "reset 
> CMOS" Jumper pins. There should be three pins in the group, with a 
> jumper currently on pins one and pin two, remove the jumper, and short 
> pins two and three with the jumper for a few seconds. Now move it back 
> to pin one and two, and your BIOS settings will be at their defaults.
> 
> Close the case, and boot up and you should be in good shape.
> 
> Merry Christmas!
> 
> Later, Ray Parrish

20081225 2058 GMT-5

Just so Im clear:
power down
remove jumper from pin 1 & 2 and put it on 2 & 3
leave for count of 5
put back on jumper pin 1 & 2
reboot

Carl, I did remove the battery. Did not help. Im assuming that after I 
power down and then I remove the battery, 30 sec to 1 minute is enough.

Wade

-- 
Registered Linux User: #480675
Linux since June 2005