Ubuntu 8.10 server 64bit on Sun X2100 AMD opteron

[Asif Iqbal]

I am using the LSI hardware raid controller with two sas disks
mirrored as my raid disk. Is there a tool to check the raid status?

excerpt from dmesg

[    3.167565] mptsas 0000:02:03.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[    3.168038] mptbase: ioc0: Initiating bringup
[    4.096015] ioc0: LSISAS1064 A3: Capabilities={Initiator}
[   10.952392] mptbase: ioc0: RAID STATUS CHANGE for VolumeID 2
[   10.952396] mptbase: ioc0:   volume is now degraded, enabled,
resync in progress
[   10.970740] scsi2 : ioc0: LSISAS1064 A3, FwRev=01040000h, Ports=1,
MaxQ=511, IRQ=28
[   11.008652] scsi 2:0:0:0: Direct-Access     FUJITSU
MAY2073RCSUN72G  0401 PQ: 0 ANSI: 4
[   11.017430] scsi 2:0:1:0: Direct-Access     FUJITSU
MAY2073RCSUN72G  0401 PQ: 0 ANSI: 4
[   11.026197] scsi 2:1:2:0: Direct-Access     LSILOGIC Logical Volume
  3000 PQ: 0 ANSI: 2
[...]
[14665.949988] mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0 id=3
[14665.949994] mptbase: ioc0:   PhysDisk is now online
[14665.953782] mptbase: ioc0: RAID STATUS CHANGE for VolumeID 2
[14665.953786] mptbase: ioc0:   volume is now optimal, enabled, resync
in progress
[14665.956521] mptbase: ioc0: RAID STATUS CHANGE for VolumeID 2
[14665.956524] mptbase: ioc0:   volume is now optimal, enabled

Thanks

-- 
Asif Iqbal
PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu