install hangs ubuntu 7.04(x64 32bit)

Gaurish Sharma gary4gar at gmail.com
Tue May 8 02:39:23 UTC 2007


ubuntu 7.04 hangs when install though lived which i got though shipit. i
completed all the seven steps of install wizard.

Just after that it hangs when a install doilog box appears, and the progress
bar it at 15%.

the caption is "scanning DISK DRIVES"

and even waiting after 30 min the progress bar does not move. i have no
option left then to reboot.
config
amd athlon 64 3000+
msi-k8mm-v
256 mb ram
and rest common stuff

Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1        1958    15727603+   7  HPFS/NTFS
/dev/sda2            1959        2945     7928077+  83  Linux
/dev/sda3            2946        9729    54492480    f  W95 Ext'd (LBA)
/dev/sda5            2946        3467     4192933+  83  Linux
/dev/sda6            3468        3524      457821   82  Linux swap / Solaris
/dev/sda7            3525        6626    24916783+   b  W95 FAT32
/dev/sda8            6627        9729    24924816    7  HPFS/NTFS

Disk /dev/sdb: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               2       38913   312560640    f  W95 Ext'd (LBA)
/dev/sdb5               2       38913   312560608+   7  HPFS/NTFS




Promt reply expected

regards,
Gary

-- 
Regards,
Gaurish Sharma
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/ubuntu-users/attachments/20070508/90b9d06e/attachment.html>
-------------- next part --------------
[    0.000000] Linux version 2.6.20-15-generic (root at palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f400 end: 000000000009f400 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009f400 size: 0000000000000c00 end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000000eef0000 end: 000000000eff0000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000eff0000 size: 0000000000003000 end: 000000000eff3000 type: 4
[    0.000000] copy_e820_map() start: 000000000eff3000 size: 000000000000d000 end: 000000000f000000 type: 3
[    0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[    0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[    0.000000] copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[    0.000000]  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000000eff0000 (usable)
[    0.000000]  BIOS-e820: 000000000eff0000 - 000000000eff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000000eff3000 - 000000000f000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 239MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f4b80
[    0.000000] Entering add_active_range(0, 0, 61424) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->    61424
[    0.000000]   HighMem     61424 ->    61424
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->    61424
[    0.000000] On node 0 totalpages: 61424
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 447 pages used for memmap
[    0.000000]   Normal zone: 56881 pages, LIFO batch:15
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP (v000 VIAK8M                                ) @ 0x000f6b80
[    0.000000] ACPI: RSDT (v001 VIAK8M AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0eff3040
[    0.000000] ACPI: FADT (v001 VIAK8M AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0eff30c0
[    0.000000] ACPI: MADT (v001 VIAK8M AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0eff7f00
[    0.000000] ACPI: DSDT (v001 VIAK8M AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:12 APIC version 16
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 10000000 (gap: 0f000000:efc00000)
[    0.000000] Detected 1999.844 MHz processor.
[   19.756722] Built 1 zonelists.  Total pages: 60945
[   19.756726] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper xforcevesa initrd=/casper/initrd.gz quiet splash --
[   19.756885] mapped APIC to ffffd000 (fee00000)
[   19.756888] mapped IOAPIC to ffffc000 (fec00000)
[   19.756891] Enabling fast FPU save and restore... done.
[   19.756893] Enabling unmasked SIMD FPU exception support... done.
[   19.756902] Initializing CPU#0
[   19.756980] PID hash table entries: 1024 (order: 10, 4096 bytes)
[   19.758677] Console: colour VGA+ 80x25
[   19.758847] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[   19.758975] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[   19.763304] Memory: 232384k/245696k available (1992k kernel code, 12780k reserved, 893k data, 328k init, 0k highmem)
[   19.763314] virtual kernel memory layout:
[   19.763315]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   19.763316]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   19.763317]     vmalloc : 0xcf800000 - 0xff7fe000   ( 767 MB)
[   19.763318]     lowmem  : 0xc0000000 - 0xceff0000   ( 239 MB)
[   19.763320]       .init : 0xc03d7000 - 0xc0429000   ( 328 kB)
[   19.763321]       .data : 0xc02f2264 - 0xc03d16d4   ( 893 kB)
[   19.763322]       .text : 0xc0100000 - 0xc02f2264   (1992 kB)
[   19.763325] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   19.840986] Calibrating delay using timer specific routine.. 4004.27 BogoMIPS (lpj=8008543)
[   19.841021] Security Framework v1.0.0 initialized
[   19.841027] SELinux:  Disabled at boot.
[   19.841041] Mount-cache hash table entries: 512
[   19.841154] CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000
[   19.841161] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   19.841163] CPU: L2 Cache: 512K (64 bytes/line)
[   19.841166] CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000410 00000000 00000000 00000000
[   19.841175] Compat vDSO mapped to ffffe000.
[   19.841178] Remapping vsyscall page to ffffe000
[   19.841186] Checking 'hlt' instruction... OK.
[   19.857089] SMP alternatives: switching to UP code
[   19.857221] Freeing SMP alternatives: 11k freed
[   19.857395] Early unpacking initramfs... done
[   20.143250] ACPI: Core revision 20060707
[   20.147043] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[   20.149783] CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 00
[   20.149805] Total of 1 processors activated (4004.27 BogoMIPS).
[   20.150309] ENABLING IO-APIC IRQs
[   20.150628] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[   20.297002] Brought up 1 CPUs
[   20.297223] Booting paravirtualized kernel on bare hardware
[   20.297315] Time: 13:43:33  Date: 04/07/107
[   20.297342] NET: Registered protocol family 16
[   20.297417] EISA bus registered
[   20.297420] ACPI: bus type pci registered
[   20.305018] PCI: PCI BIOS revision 2.10 entry at 0xfb4b0, last bus=1
[   20.305020] PCI: Using configuration type 1
[   20.305021] Setting up standard PCI resources
[   20.314045] ACPI: Interpreter enabled
[   20.314051] ACPI: Using IOAPIC for interrupt routing
[   20.314516] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   20.314522] PCI: Probing PCI hardware (bus 00)
[   20.315419] Boot video device is 0000:01:00.0
[   20.315456] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   20.367038] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[   20.367335] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[   20.367634] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 *12)
[   20.367916] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[   20.368186] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[   20.368450] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[   20.368710] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[   20.368978] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[   20.369431] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
[   20.369867] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[   20.370184] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[   20.370568] ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
[   20.372664] Linux Plug and Play Support v0.97 (c) Adam Belay
[   20.372674] pnp: PnP ACPI init
[   20.376740] pnp: PnP ACPI: found 13 devices
[   20.376744] PnPBIOS: Disabled by ACPI PNP
[   20.376788] PCI: Using ACPI for IRQ routing
[   20.376791] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   20.401812] NET: Registered protocol family 8
[   20.401814] NET: Registered protocol family 20
[   20.402157] pnp: 00:02: ioport range 0x4000-0x407f could not be reserved
[   20.402160] pnp: 00:02: ioport range 0x5000-0x500f has been reserved
[   20.402353] PCI: Bridge: 0000:00:01.0
[   20.402354]   IO window: disabled.
[   20.402358]   MEM window: f4000000-f5ffffff
[   20.402362]   PREFETCH window: f0000000-f3ffffff
[   20.402378] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   20.402412] NET: Registered protocol family 2
[   20.441126] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[   20.441204] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[   20.441243] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[   20.441264] TCP: Hash tables configured (established 8192 bind 4096)
[   20.441266] TCP reno registered
[   20.453071] checking if image is initramfs... it is
[   21.019928] Freeing initrd memory: 6966k freed
[   21.020341] audit: initializing netlink socket (disabled)
[   21.020355] audit(1178545413.340:1): initialized
[   21.020473] VFS: Disk quotas dquot_6.5.1
[   21.020491] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   21.020538] io scheduler noop registered
[   21.020540] io scheduler anticipatory registered
[   21.020542] io scheduler deadline registered
[   21.020554] io scheduler cfq registered (default)
[   21.020824] isapnp: Scanning for PnP cards...
[   21.374896] isapnp: No Plug & Play device found
[   21.393169] Real Time Clock Driver v1.12ac
[   21.393211] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   21.393317] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   21.393439] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   21.393848] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   21.394031] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   21.394155] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 16
[   21.394352] 0000:00:0a.0: ttyS2 at I/O 0xe008 (irq = 16) is a 16450
[   21.394477] 0000:00:0a.0: ttyS3 at I/O 0xe010 (irq = 16) is a 8250
[   21.394531] Couldn't register serial port 0000:00:0a.0: -28
[   21.394589] mice: PS/2 mouse device common for all mice
[   21.395036] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   21.395233] input: Macintosh mouse button emulation as /class/input/input0
[   21.395261] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   21.395264] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   21.395514] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[   21.395517] PNP: PS/2 controller doesn't have AUX irq; using default 12
[   21.645009] serio: i8042 KBD port at 0x60,0x64 irq 1
[   21.645114] EISA: Probing bus 0 at eisa.0
[   21.645134] Cannot allocate resource for EISA slot 4
[   21.645136] Cannot allocate resource for EISA slot 5
[   21.645150] EISA: Detected 0 cards.
[   21.675240] TCP cubic registered
[   21.675247] NET: Registered protocol family 1
[   21.675268] Using IPI No-Shortcut mode
[   21.675322] ACPI: (supports S0 S1 S4 S5)
[   21.675362]   Magic number: 7:580:735
[   21.675832] Freeing unused kernel memory: 328k freed
[   21.676882] Time: tsc clocksource has been installed.
[   21.689309] input: AT Translated Set 2 keyboard as /class/input/input1
[   22.874607] Capability LSM initialized
[   23.329448] SCSI subsystem initialized
[   23.333426] libata version 2.20 loaded.
[   23.334450] sata_via 0000:00:0f.0: version 2.1
[   23.334784] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[   23.334793] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17
[   23.334812] sata_via 0000:00:0f.0: routed to hard irq line 11
[   23.334868] ata1: SATA max UDMA/133 cmd 0x0001e100 ctl 0x0001e202 bmdma 0x0001e500 irq 17
[   23.334892] ata2: SATA max UDMA/133 cmd 0x0001e300 ctl 0x0001e402 bmdma 0x0001e508 irq 17
[   23.334908] scsi0 : sata_via
[   23.351805] usbcore: registered new interface driver usbfs
[   23.351827] usbcore: registered new interface driver hub
[   23.351847] usbcore: registered new device driver usb
[   23.380143] USB Universal Host Controller Interface driver v3.0
[   23.408166] via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
[   23.513389] Floppy drive(s): fd0 is 1.44M
[   23.536871] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   23.545367] FDC 0 is a post-1991 82077
[   23.703500] ATA: abnormal status 0x7F on port 0x0001e107
[   23.714146] ATA: abnormal status 0x7F on port 0x0001e107
[   23.721151] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
[   23.721156] ata1.00: ATA-6: ST380817AS, 3.42, max UDMA/133
[   23.721159] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   23.729140] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
[   23.729143] ata1.00: configured for UDMA/133
[   23.729154] scsi1 : sata_via
[   23.932832] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[   23.943473] ATA: abnormal status 0x7F on port 0x0001e307
[   23.943575] scsi 0:0:0:0: Direct-Access     ATA      ST380817AS       3.42 PQ: 0 ANSI: 5
[   23.944957] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[   23.944977] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17
[   23.944989] VP_IDE: chipset revision 6
[   23.944991] VP_IDE: not 100% native mode: will probe irqs later
[   23.945001] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[   23.945008]     ide0: BM-DMA at 0xe700-0xe707, BIOS settings: hda:pio, hdb:pio
[   23.945020]     ide1: BM-DMA at 0xe708-0xe70f, BIOS settings: hdc:DMA, hdd:pio
[   23.945027] Probing IDE interface ide0...
[   23.962068] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[   23.962084] sda: Write Protect is off
[   23.962086] sda: Mode Sense: 00 3a 00 00
[   23.962097] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   23.962151] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[   23.962158] sda: Write Protect is off
[   23.962160] sda: Mode Sense: 00 3a 00 00
[   23.962170] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   23.962173]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
[   24.035452] sd 0:0:0:0: Attached scsi disk sda
[   24.039807] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   24.052854] end_request: I/O error, dev fd0, sector 0
[   24.512814] Probing IDE interface ide1...
[   25.132802] end_request: I/O error, dev fd0, sector 0
[   25.211311] kjournald starting.  Commit interval 5 seconds
[   25.211323] EXT3-fs: mounted filesystem with ordered data mode.
[   25.241789] kjournald starting.  Commit interval 5 seconds
[   25.241800] EXT3-fs: mounted filesystem with ordered data mode.
[   25.376878] hdc: SONY CD-RW CRX320E, ATAPI CD/DVD-ROM drive
[   26.049240] ide1 at 0x170-0x177,0x376 on irq 15
[   26.052899] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[   26.052910] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18
[   26.052921] uhci_hcd 0000:00:10.0: UHCI Host Controller
[   26.053181] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[   26.053212] uhci_hcd 0000:00:10.0: irq 18, io base 0x0000e800
[   26.053624] usb usb1: configuration #1 chosen from 1 choice
[   26.053762] hub 1-0:1.0: USB hub found
[   26.053771] hub 1-0:1.0: 2 ports detected
[   26.062532] hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[   26.062540] Uniform CD-ROM driver Revision: 3.20
[   26.157512] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18
[   26.157526] uhci_hcd 0000:00:10.1: UHCI Host Controller
[   26.157545] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[   26.157567] uhci_hcd 0000:00:10.1: irq 18, io base 0x0000e900
[   26.157653] usb usb2: configuration #1 chosen from 1 choice
[   26.157674] hub 2-0:1.0: USB hub found
[   26.157680] hub 2-0:1.0: 2 ports detected
[   26.260853] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18
[   26.260866] uhci_hcd 0000:00:10.2: UHCI Host Controller
[   26.260883] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[   26.260905] uhci_hcd 0000:00:10.2: irq 18, io base 0x0000ea00
[   26.260985] usb usb3: configuration #1 chosen from 1 choice
[   26.261009] hub 3-0:1.0: USB hub found
[   26.261014] hub 3-0:1.0: 2 ports detected
[   26.364845] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18
[   26.364859] uhci_hcd 0000:00:10.3: UHCI Host Controller
[   26.364877] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[   26.364900] uhci_hcd 0000:00:10.3: irq 18, io base 0x0000eb00
[   26.364979] usb usb4: configuration #1 chosen from 1 choice
[   26.365001] hub 4-0:1.0: USB hub found
[   26.365008] hub 4-0:1.0: 2 ports detected
[   26.400753] end_request: I/O error, dev fd0, sector 0
[   26.469245] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[   26.469256] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 19
[   26.469330] eth0: VIA Rhine II at 0x1ed00, 00:11:09:06:18:c6, IRQ 19.
[   26.470043] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
[   26.470112] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18
[   26.470121] ehci_hcd 0000:00:10.4: EHCI Host Controller
[   26.470148] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[   26.470190] ehci_hcd 0000:00:10.4: irq 18, io mem 0xf6001000
[   26.470196] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   26.470262] usb usb5: configuration #1 chosen from 1 choice
[   26.470284] hub 5-0:1.0: USB hub found
[   26.470291] hub 5-0:1.0: 8 ports detected
[   26.896912] ISO 9660 Extensions: Microsoft Joliet Level 3
[   26.924594] ISO 9660 Extensions: RRIP_1991A
[   26.960514] Registering unionfs 20060916-2203
[   26.960519] unionfs: debugging is not enabled
[   26.972189] loop: loaded (max 8 devices)
[   27.030732] squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
[   27.604693] usb 5-6: new high speed USB device using ehci_hcd and address 3
[   27.738341] usb 5-6: configuration #1 chosen from 1 choice
[   27.976678] usb 2-2: new low speed USB device using uhci_hcd and address 2
[   28.149121] usb 2-2: configuration #1 chosen from 1 choice
[   28.152203] usbcore: registered new interface driver libusual
[   28.155401] Initializing USB Mass Storage driver...
[   28.155460] scsi2 : SCSI emulation for USB Mass Storage devices
[   28.155498] usb-storage: device found at 3
[   28.155500] usb-storage: waiting for device to settle before scanning
[   28.155511] usbcore: registered new interface driver usb-storage
[   28.155513] USB Mass Storage support registered.
[   28.169605] usbcore: registered new interface driver hiddev
[   28.182250] input: Microsoft Basic Optical Mouse as /class/input/input2
[   28.182340] input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:10.1-2
[   28.182354] usbcore: registered new interface driver usbhid
[   28.182357] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   33.152629] usb-storage: device scan complete
[   33.153371] scsi 2:0:0:0: Direct-Access     ST332062         5QF1SNQX E    PQ: 0 ANSI: 2 CCS
[   33.154598] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
[   33.155220] sdb: Write Protect is off
[   33.155223] sdb: Mode Sense: 00 38 00 00
[   33.155225] sdb: assuming drive cache: write through
[   33.156095] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
[   33.156719] sdb: Write Protect is off
[   33.156721] sdb: Mode Sense: 00 38 00 00
[   33.156722] sdb: assuming drive cache: write through
[   33.156725]  sdb: sdb1 < sdb5 >
[   33.171644] sd 2:0:0:0: Attached scsi disk sdb
[   33.171674] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   75.814577] eth0: link down
[   77.058866] Linux agpgart interface v0.102 (c) Dave Jones
[   77.140411] agpgart: Detected AGP bridge 0
[   77.144555] agpgart: AGP aperture is 128M @ 0xe8000000
[   77.340381] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   77.732373] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   77.902894] NET: Registered protocol family 17
[   78.515619] input: PC Speaker as /class/input/input3
[   78.565148] parport: PnPBIOS parport detected.
[   78.565201] parport0: PC-style at 0x378, irq 7 [PCSPP]
[   79.127669] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[   79.127679] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 20
[   79.127818] PCI: Setting latency timer of device 0000:00:11.5 to 64
[   80.356656] fuse init (API version 7.8)
[   80.745415] Adding 457812k swap on /dev/sda6.  Priority:-1 extents:1 across:457812k
[   87.245618] input: Power Button (FF) as /class/input/input4
[   87.246731] ACPI: Power Button (FF) [PWRF]
[   87.247903] input: Power Button (CM) as /class/input/input5
[   87.249008] ACPI: Power Button (CM) [PWRB]
[   87.716679] No dock devices found.
[   87.735565] Using specific hotkey driver
[   87.773270] ibm_acpi: ec object not found
[   87.981253] pcc_acpi: loading...
[   88.782982] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (version 2.00.00)
[   88.783033] powernow-k8: invalid freq entries 3900000 kHz vs. 65535000 kHz
[   88.783036] powernow-k8: invalid freq entries 3900000 kHz vs. 65535000 kHz
[   88.783039] powernow-k8: invalid freq entries 3900000 kHz vs. 65535000 kHz
[   88.783041] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x2
[   88.783043] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x6
[   88.783046] powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
[  103.465110] lp0: using parport0 (interrupt-driven).
[  103.511349] ppdev: user-space parallel port driver
[  114.475096] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[  114.475102] apm: overridden by ACPI.
[   95.156000] Time: acpi_pm clocksource has been installed.
[   98.160000] Bluetooth: Core ver 2.11
[   98.160000] NET: Registered protocol family 31
[   98.160000] Bluetooth: HCI device and connection manager initialized
[   98.160000] Bluetooth: HCI socket layer initialized
[   98.532000] Bluetooth: L2CAP ver 2.8
[   98.532000] Bluetooth: L2CAP socket layer initialized
[   98.808000] Bluetooth: RFCOMM socket layer initialized
[   98.808000] Bluetooth: RFCOMM TTY layer initialized
[   98.808000] Bluetooth: RFCOMM ver 1.8
[  103.416000] NET: Registered protocol family 10
[  103.416000] lo: Disabled Privacy Extensions
[  103.416000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  153.052000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[  153.056000] NTFS-fs warning (device sdb5): parse_options(): Option utf8 is no longer supported, using option nls=utf8. Please use option nls=utf8 in the future and make sure utf8 is compiled either as a module or into the kernel.
[  153.148000] NTFS volume version 3.1.
[  275.288000] NTFS-fs warning (device sda8): parse_options(): Option utf8 is no longer supported, using option nls=utf8. Please use option nls=utf8 in the future and make sure utf8 is compiled either as a module or into the kernel.
[  275.324000] NTFS volume version 3.1.
[  284.316000] NTFS-fs warning (device sda1): parse_options(): Option utf8 is no longer supported, using option nls=utf8. Please use option nls=utf8 in the future and make sure utf8 is compiled either as a module or into the kernel.
[  285.176000] NTFS volume version 3.1.


More information about the ubuntu-users mailing list