Driver Installion problem for NetGear wireless card

[NoOp]

On 12/31/2007 03:00 AM, Larry Shields wrote:

> 
> The support link shown in the above shows how to setup a MODEM not the 
> USB card...
> 
> Thanks for the reply...
> 
> Larry
> 

When you click on the network manager are you not able to set the
network name, encryption type and password? The reason that I gave you
the link for the modem and the 2wire questions is so that you can review
and/or set the modem settings, and then use that information to set your
WG111 from the network manager.

- Do you have MAC Filtering turned on or off?
- Did you use the 2wire WEP or WPN key?
<http://support.2wire.com/cgi-bin/twowire.cfg/php/enduser/std_adp.php?p_faqid=134&p_created=1042150505&p_sid=tNO1aCUi&p_lva=&p_sp=cF9zcmNoPSZwX3NvcnRfYnk9JnBfZ3JpZHNvcnQ9JnBfcm93X2NudD0yMTImcF9wcm9kcz0mcF9jYXRzPSZwX3B2PSZwX2N2PSZwX3BhZ2U9MQ**&p_li=&p_topview=1>
[Note: The HomePortal default settings include wireless security (WEP).
To connect to the HomePortal, you will need to configure the third-party
wireless adapter with the HomePortal security key. This is a 64-bit,
hexidecimal WEP key and is located on the bottom of the HomePortal unit
near the serial number. It appears in brackets (e.g. [0123456789]).]
<http://support.2wire.com/cgi-bin/twowire.cfg/php/enduser/std_adp.php?p_faqid=1291&p_created=1044891818&p_sid=tNO1aCUi&p_lva=&p_sp=cF9zcmNoPSZwX3NvcnRfYnk9JnBfZ3JpZHNvcnQ9JnBfcm93X2NudD0yMTImcF9wcm9kcz0mcF9jYXRzPSZwX3B2PSZwX2N2PSZwX3BhZ2U9MQ**&p_li=&p_topview=1>
[For maximum security and by default, your HomePortal arrives from the
factory with WEP or WPA enabled. To connect to HomePortal, Configure
your computer's wireless adapter with a unique HomePortal network key,
also called a "pass key" or an "encryption key." The default key is the
10-digit number printed inside the brackets [ ].that you can find on the
bottom of your HomePortal.]

You can/or should be able to do all of that from the Network Manager applet.

This may be of some help:
http://ubuntuforums.org/showthread.php?t=329299

Also: WG111v2 manual is here:
http://kbserver.netgear.com/products/wg111v2.asp