3rd ide master: some headway

[Njoku, George O.]

Also add "rw" in /etc/fstab for the "sg0" entry.
I saw in a forum that it works with dvd-ram


Cheers
George


-----Original Message-----
From: ubuntu-users-bounces at lists.ubuntu.com
[mailto:ubuntu-users-bounces at lists.ubuntu.com] On Behalf Of James Takac
Sent: Thursday, August 02, 2007 9:27 PM
To: ubuntu-users at lists.ubuntu.com
Subject: Re: 3rd ide master: some headway

On Friday 03 August 2007 01:02:18 Njoku, George O. wrote:
> If it no trouble....a copy of fstab...or output of `mount`
>
>
> George
>
>
> Ps : sry ...wrong reply
>
>
> -----Original Message-----
> From: ubuntu-users-bounces at lists.ubuntu.com
> [mailto:ubuntu-users-bounces at lists.ubuntu.com] On Behalf Of James
Takac
> Sent: Thursday, August 02, 2007 10:51 AM
> To: ubuntu-users at lists.ubuntu.com
> Subject: Re: 3rd ide master: some headway
>
> On Friday 03 August 2007 00:35:45 Njoku, George O. wrote:
> > Try putting a dvd in
> >
> > Cheers
> > George
> >
> >
> > -----Original Message-----
> > From: ubuntu-users-bounces at lists.ubuntu.com
> > [mailto:ubuntu-users-bounces at lists.ubuntu.com] On Behalf Of James
>
> Takac
>
> > Sent: Thursday, August 02, 2007 10:15 AM
> > To: ubuntu-users at lists.ubuntu.com
> > Cc: ubuntu-au at lists.ubuntu.com
> > Subject: 3rd ide master: some headway
> >
> > Hi Guys
> >
> > I've made a little headway re my dvd ram drive on the third ide
>
> master.
>
> > When
> > scanning the logs I found the device is indeed detected and mapped
> > to /dev/sg0. However trying to mount this gives me an error saying
>
> it's
>
> > not a
> > block device. udev in /var/logs was what gave me the clue
> >
> > If it helps, it shows up as follows in the udev log
> >
> > UDEV  [1186061983.009453] add      /class/scsi_generic/sg0
> > (scsi_generic)
> > UDEV_LOG=3
> > ACTION=add
> > DEVPATH=/class/scsi_generic/sg0
> > SUBSYSTEM=scsi_generic
> > SEQNUM=1828
> >
PHYSDEVPATH=/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0
> > PHYSDEVBUS=scsi
> > PHYSDEVDRIVER=sd
> > MAJOR=21
> > MINOR=0
> > UDEVD_EVENT=1
> > DEVNAME=/dev/sg0
> >
> > Just not sure how to go about trying to mount it yet
> >
> > --
> > ubuntu-users mailing list
> > ubuntu-users at lists.ubuntu.com
> > Modify settings or unsubscribe at:
> > https://lists.ubuntu.com/mailman/listinfo/ubuntu-users
>
> Hi George
>
> I get the errors with or without a disc in the drive. It just wont
mount
>
> regardless
>
> James
>
> --
> ubuntu-users mailing list
> ubuntu-users at lists.ubuntu.com
> Modify settings or unsubscribe at:
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-users

Hi George

No worries, happens from time to time

My current fstab is

# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
# /dev/sda3
UUID=592ab5d4-7f72-4008-b18a-8d3e90db9318 /               ext3    
defaults,errors=remount-ro 0       1
# /dev/sda5
UUID=831fe505-c93a-47d1-ac07-08e024e0cf9f none            swap    sw

0       0
/dev/sg0        /media/cdrom0   udf,iso9660 user,noauto     0       0

# Generated by Automatix
/dev/sda1   /media/sda1   vfat    iocharset=utf8,umask=000  0    0
/dev/sda2   /media/sda2   ntfs-3g  defaults,locale=en_US.utf8    0    0
## End of Automatix mounted partitions



And of course the response to trying to mount is


p3nn at p3nn:~$ mount /dev/sg0
mount: /dev/sg0 is not a block device
p3nn at p3nn:~$ 


As soon as updates finnish will check to see if udftools is installed.
Servers 
seem a lil slow for now so could be a while

James

-- 
ubuntu-users mailing list
ubuntu-users at lists.ubuntu.com
Modify settings or unsubscribe at:
https://lists.ubuntu.com/mailman/listinfo/ubuntu-users