USB refuses to work

[Serg B.]

Hi All,

I installed Edgy and my USB (flash) key and portable USB drive stopped working.

They work fine on Dapper (other machines in the house) so I know that
the hardware is working fine. Also when I connect my iPod (also no
longer recognised) it starts charging, keyboard and mouse work fine
via USB so I know the USB ports work...

lsmod|grep usb shows the following:

:~$ lsmod | grep -i usb
usb_storage            73408  0
libusual               15632  1 usb_storage
usbhid                 42464  0
usbcore               130304  6 usb_storage,libusual,usbhid,ehci_hcd,ohci_hcd
scsi_mod              141320  2 usb_storage,libata


:~$ dmesg | grep -i usb shows the following:

[17179576.584000] usbcore: registered new driver usbfs
[17179576.584000] usbcore: registered new driver hub
[17179576.584000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host
Controller (OHCI) Driver (PCI)
[17179576.584000] ohci_hcd 0000:00:03.0: new USB bus registered,
assigned bus number 1
[17179576.672000] usb usb1: configuration #1 chosen from 1 choice
[17179576.672000] hub 1-0:1.0: USB hub found
[17179576.776000] ohci_hcd 0000:00:03.1: new USB bus registered,
assigned bus number 2
[17179576.860000] usb usb2: configuration #1 chosen from 1 choice
[17179576.860000] hub 2-0:1.0: USB hub found
[17179576.964000] ohci_hcd 0000:00:03.2: new USB bus registered,
assigned bus number 3
[17179577.048000] usb usb3: configuration #1 chosen from 1 choice
[17179577.048000] hub 3-0:1.0: USB hub found
[17179577.088000] usb 1-2: new low speed USB device using ohci_hcd and address 2
[17179577.152000] ehci_hcd 0000:00:03.3: new USB bus registered,
assigned bus number 4
[17179577.152000] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00,
driver 10 Dec 2004
[17179577.152000] usb usb4: configuration #1 chosen from 1 choice
[17179577.152000] hub 4-0:1.0: USB hub found
[17179578.296000] usb 2-1: new low speed USB device using ohci_hcd and address 2
[17179578.508000] usb 2-1: configuration #1 chosen from 1 choice
[17179578.816000] usb 1-2: new low speed USB device using ohci_hcd and address 3
[17179579.028000] usb 1-2: configuration #1 chosen from 1 choice
[17179585.856000] usbcore: registered new driver hiddev
[17179585.864000] input: USB HID v1.10 Mouse [Microsoft Microsoft
3-Button Mouse with IntelliEye(TM)] on usb-0000:00:03.1-1
[17179585.872000] input: Dell Dell USB Keyboard as /class/input/input3
[17179585.872000] input: USB HID v1.10 Keyboard [Dell Dell USB
Keyboard] on usb-0000:00:03.0-2
[17179585.872000] usbcore: registered new driver usbhid
[17179585.872000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179586.932000] usbcore: registered new driver libusual
[17179586.936000] Initializing USB Mass Storage driver...
[17179586.936000] usbcore: registered new driver usb-storage
[17179586.936000] USB Mass Storage support registered.
[17179763.484000] usb 4-8: new high speed USB device using ehci_hcd
and address 4


Ideas???


    Serg


-- 
Serg