Dapper : network unreachable

[sebastien]

Hi Florian,
In case that helps here is the kernel nr :
/boot/vmlinuz-2.6.15-23-386

And the output of lshw -C network is :
*-network
       description: Ethernet interface
       product: 21x4x DEC-Tulip compatible 10/100 Ethernet
       vendor: Davicom Semiconductor, Inc.
       physical id: 11
       bus info: pci at 00:11.0
       logical name: eth0
       version: 40
       serial: 00:08:a1:17:b7:71
       width: 32 bits
       clock: 33MHz
       capabilities: bus_master cap_list ethernet physical
       configuration: broadcast=yes driver=tulip driverversion=1.1.13
multicast=yes       resources: ioport:b000-b0ff
iomemory:de000000-de0000ff irq:11

On Mon, 12 Jun 2006 19:08:23 +0200
Florian Diesch <diesch at spamfence.net> wrote:

> sebastien <scamot2004 at gmx.at> wrote:
> 
> > I already posted herethis thread but as I got no reply on that
> > specific point, I post again.
> >
> > My dapper /etc/network/interfaces is configured properly for DHCP.
> > But it cannot connect to the local network. eth0 is detected OK but
> > I got the error message :
> >
> > [4295357.469000] ADDRCONF(NETDEV_UP): eth0: link is not ready
> > [4295360.471000] 0000:00:11.0: tulip_stop_rxtx() failed (CSR5
> > 0xfc740000 CSR6 0x2042202)
> 
> This looks like a problem with the hardware driver. Which NIC and
> which driver are you using?
> 
> File a bug against your kernel package (dpkg -S /boot/vmlinuz-* should
> help you to find out which it is) and include the output of sudo lshw
> -C network.
> 
> 
> 
> 
>    Florian