1st Ubuntu Post

Roger Neth Jr baypos at gmail.com
Sun Aug 20 11:02:30 UTC 2006 

Hello List, how are you?

4AM and not tired of setting up Ubuntu for the first time. : )

Having a problem with a Compaq Wireless PC Card WL110 pcmcia on a
Panasonic CF-71.

It seemed to work with Breezy but Dapper the power light blinks
intermittently. No internet connection, no ping.
Also shows up in networking as eth1

Please find my dmesg and lshw.

Any help is appreciated.

If this does not work, what wireless card is recommended and if
802.11g and/or a supported.

Love the software and fuzzy community feeling.

Thank you!

Roger N

Dmesg

[17179569.184000] Linux version 2.6.15-26-386 (buildd at terranova) (gcc
version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Thu Aug 3 02:52:00
UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
[17179569.184000]  BIOS-e820: 000000000bff0000 - 000000000bfffc00 (ACPI data)
[17179569.184000]  BIOS-e820: 000000000bfffc00 - 000000000c000000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 00000000fffe4c00 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 191MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 49136
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000]   Normal zone: 45040 pages, LIFO batch:7
[17179569.184000]   HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI 2.1 present.
[17179569.184000] ACPI: RSDP (v000 PTLTD
  ) @ 0x000f6680
[17179569.184000] ACPI: RSDT (v001 PTLTD    RSDT   0x00000000  LTP
0x00000000) @ 0x0bffca6e
[17179569.184000] ACPI: FADT (v001 INTEL  440BX    0x00000000 PTL
0x000f4240) @ 0x0bfffb65
[17179569.184000] ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x00000000  LTP
0x00000001) @ 0x0bfffbd9
[17179569.184000] ACPI: DSDT (v001    PTL    BX-TJ 0x00000000 MSFT
0x01000004) @ 0x00000000
[17179569.184000] ACPI: BIOS age (1998) fails cutoff (2000),
acpi=force is required to enable ACPI
[17179569.184000] ACPI: Disabling ACPI support
[17179569.184000] Allocating PCI resources starting at 10000000 (gap:
0c000000:f3fe4c00)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash
[17179569.184000] Local APIC disabled by BIOS (or by default) -- you
can enable it with "lapic"
[17179569.184000] mapped APIC to ffffd000 (01181000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 1024 (order: 10, 16384 bytes)
[    0.000000] Detected 298.460 MHz processor.
[ 5050.861114] Using tsc for high-res timesource
[ 5050.863266] Console: colour VGA+ 80x25
[ 5050.864616] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 5050.865802] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 5050.913655] Memory: 184116k/196544k available (1976k kernel code,
11876k reserved, 606k data, 288k init, 0k highmem)
[ 5050.913683] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 5050.993430] Calibrating delay using timer specific routine.. 597.95
BogoMIPS (lpj=1195905)
[ 5050.993612] Security Framework v1.0.0 initialized
[ 5050.993664] SELinux:  Disabled at boot.
[ 5050.993746] Mount-cache hash table entries: 512
[ 5050.994266] CPU: After generic identify, caps: 0183f9ff 00000000
00000000 00000000 00000000 00000000 00000000
[ 5050.994310] CPU: After vendor identify, caps: 0183f9ff 00000000
00000000 00000000 00000000 00000000 00000000
[ 5050.994359] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 5050.994376] CPU: L2 cache: 512K
[ 5050.994393] CPU: After all inits, caps: 0183f9ff 00000000 00000000
00000040 00000000 00000000 00000000
[ 5050.994486] mtrr: v2.0 (20020519)
[ 5050.994513] CPU: Intel Pentium II (Deschutes) stepping 02
[ 5050.994536] Enabling fast FPU save and restore... done.
[ 5050.994558] Checking 'hlt' instruction... OK.
[ 5051.010227] checking if image is initramfs... it is
[ 5056.453011] Freeing initrd memory: 6840k freed
[ 5056.526132] NET: Registered protocol family 16
[ 5056.526306] EISA bus registered
[ 5056.527705] PCI: PCI BIOS revision 2.10 entry at 0xfd9ee, last bus=0
[ 5056.527743] PCI: Using configuration type 1
[ 5056.530017] ACPI: Subsystem revision 20051216
[ 5056.530033] ACPI: Interpreter disabled.
[ 5056.530053] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 5056.530094] pnp: PnP ACPI: disabled
[ 5056.530123] PnPBIOS: Scanning system for PnP BIOS support...
[ 5056.530203] PnPBIOS: Found PnP BIOS installation structure at 0xc00f66a0
[ 5056.530226] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xae9b, dseg 0x400
[ 5056.585978] PnPBIOS: 20 nodes reported by PnP BIOS; 20 recorded by driver
[ 5056.586063] PCI: Probing PCI hardware
[ 5056.586095] PCI: Probing PCI hardware (bus 00)
[ 5056.586572] Boot video device is 0000:00:02.0
[ 5056.586985] PCI quirk: region 1000-103f claimed by PIIX4 ACPI
[ 5056.587006] PCI quirk: region 1040-104f claimed by PIIX4 SMB
[ 5056.587032] PIIX4 devres I PIO at 0398-0399
[ 5056.589869] PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
[ 5056.591687] pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved
[ 5056.591711] pnp: 00:0c: ioport range 0x1000-0x103f has been reserved
[ 5056.591731] pnp: 00:0c: ioport range 0x1040-0x104f has been reserved
[ 5056.593252] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[ 5056.593335] PCI: Bus 1, cardbus bridge: 0000:00:0a.0
[ 5056.593352]   IO window: 00001400-000014ff
[ 5056.593370]   IO window: 00001800-000018ff
[ 5056.593389]   PREFETCH window: 10000000-11ffffff
[ 5056.593408]   MEM window: 12000000-13ffffff
[ 5056.593425] PCI: Bus 5, cardbus bridge: 0000:00:0a.1
[ 5056.593440]   IO window: 00001c00-00001cff
[ 5056.593457]   IO window: 00002000-000020ff
[ 5056.593476]   PREFETCH window: 14000000-15ffffff
[ 5056.593495]   MEM window: 16000000-17ffffff
[ 5056.593542] PCI: Found IRQ 11 for device 0000:00:0a.0
[ 5056.593608] PCI: Found IRQ 11 for device 0000:00:0a.1
[ 5056.594041] Simple Boot Flag at 0x3d set to 0x1
[ 5056.597006] audit: initializing netlink socket (disabled)
[ 5056.597058] audit(1124534132.132:1): initialized
[ 5056.597638] VFS: Disk quotas dquot_6.5.1
[ 5056.597766] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 5056.598077] Initializing Cryptographic API
[ 5056.598104] io scheduler noop registered
[ 5056.598141] io scheduler anticipatory registered
[ 5056.598170] io scheduler deadline registered
[ 5056.598233] io scheduler cfq registered
[ 5056.598254] Limiting direct PCI/PCI transfers.
[ 5056.599153] isapnp: Scanning for PnP cards...
[ 5056.964794] isapnp: No Plug & Play device found
[ 5057.088349] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 5057.134423] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5057.142465] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5057.142796] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports,
IRQ sharing enabled
[ 5057.175477] pnp: Device 00:0f activated.
[ 5057.176109] 00:0f: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 5057.185511] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 5057.185876] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 5057.185901] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[ 5057.186623] mice: PS/2 mouse device common for all mice
[ 5057.191451] EISA: Probing bus 0 at eisa.0
[ 5057.191485] Cannot allocate resource for EISA slot 1
[ 5057.191503] Cannot allocate resource for EISA slot 2
[ 5057.191569] EISA: Detected 0 cards.
[ 5057.191800] NET: Registered protocol family 2
[ 5057.236052] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 5057.236861] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 5057.237100] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 5057.237353] TCP: Hash tables configured (established 8192 bind 8192)
[ 5057.237371] TCP reno registered
[ 5057.244909] TCP bic registered
[ 5057.244956] NET: Registered protocol family 1
[ 5057.244991] NET: Registered protocol family 8
[ 5057.245005] NET: Registered protocol family 20
[ 5057.245109] Using IPI Shortcut mode
[ 5057.245304] Freeing unused kernel memory: 288k freed
[ 5057.262216] input: AT Translated Set 2 keyboard as /class/input/input0
[ 5057.604975] vga16fb: initializing
[ 5057.605019] vga16fb: mapped to 0xc00a0000
[ 5057.774526] Console: switching to colour frame buffer device 80x25
[ 5057.774557] fb0: VGA16 VGA frame buffer device
[ 5058.985132] Capability LSM initialized
[ 5061.785874] PIIX4: IDE controller at PCI slot 0000:00:07.1
[ 5061.785941] PIIX4: chipset revision 1
[ 5061.785956] PIIX4: not 100% native mode: will probe irqs later
[ 5061.785995]     ide0: BM-DMA at 0xfcf0-0xfcf7, BIOS settings:
hda:DMA, hdb:pio
[ 5061.786058]     ide1: BM-DMA at 0xfcf8-0xfcff, BIOS settings:
hdc:DMA, hdd:pio
[ 5061.786105] Probing IDE interface ide0...
[ 5062.073742] hda: FUJITSU MHE2064AT, ATA DISK drive
[ 5062.749360] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5062.750145] Probing IDE interface ide1...
[ 5063.485241] hdc: UJDA150, ATAPI CD/DVD-ROM drive
[ 5064.161362] ide1 at 0x170-0x177,0x376 on irq 15
[ 5064.203450] hda: max request size: 128KiB
[ 5064.318013] hda: 12685680 sectors (6495 MB), CHS=13424/15/63, UDMA(33)
[ 5064.318051] hda: cache flushes not supported
[ 5064.318760]  hda: hda1 hda2 < hda5 >
[ 5064.362113] hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
[ 5064.362158] Uniform CD-ROM driver Revision: 3.20
[ 5065.157368] usbcore: registered new driver usbfs
[ 5065.158797] usbcore: registered new driver hub
[ 5065.172102] USB Universal Host Controller Interface driver v2.3
[ 5065.173685] PCI: Found IRQ 11 for device 0000:00:07.2
[ 5065.173759] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 5065.175469] uhci_hcd 0000:00:07.2: new USB bus registered, assigned
bus number 1
[ 5065.175518] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000fcc0
[ 5065.177194] hub 1-0:1.0: USB hub found
[ 5065.177266] hub 1-0:1.0: 2 ports detected
[ 5065.541965] Attempting manual resume
[ 5065.700433] EXT3-fs: mounted filesystem with ordered data mode.
[ 5065.708358] kjournald starting.  Commit interval 5 seconds
[ 5100.659666] PCI: Found IRQ 11 for device 0000:00:0a.0
[ 5100.659742] Yenta: CardBus bridge found at 0000:00:0a.0 [10f7:8315]
[ 5100.784951] Yenta: ISA IRQ mask 0x0698, PCI irq 11
[ 5100.784973] Socket status: 30000450
[ 5100.785383] PCI: Found IRQ 11 for device 0000:00:0a.1
[ 5100.785456] Yenta: CardBus bridge found at 0000:00:0a.1 [10f7:8315]
[ 5100.912940] Yenta: ISA IRQ mask 0x0698, PCI irq 11
[ 5100.912960] Socket status: 30000456
[ 5101.419865] pccard: PCMCIA card inserted into slot 0
[ 5102.042107] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[ 5102.555083] input: PS/2 Generic Mouse as /class/input/input1
[ 5104.302896] input: PC Speaker as /class/input/input2
[ 5104.315860] Real Time Clock Driver v1.12
[ 5104.964563] cs: IO port probe 0x100-0x3af: excluding 0x100-0x107
0x1b0-0x1b7 0x220-0x22f 0x300-0x307 0x388-0x38f 0x398-0x39f
[ 5104.967141] cs: IO port probe 0x3e0-0x4ff: clean.
[ 5104.968334] cs: IO port probe 0x820-0x8ff: clean.
[ 5104.969400] cs: IO port probe 0xc00-0xcf7: clean.
[ 5104.971165] cs: IO port probe 0xa00-0xaff: clean.
[ 5104.972384] cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 5104.980513] pcmcia: registering new device pcmcia0.0
[ 5105.951414] pnp: Device 00:17 activated.
[ 5105.951442] parport: PnPBIOS parport detected.
[ 5105.951518] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 5106.137942] cs: IO port probe 0x100-0x3af: excluding 0x100-0x107
0x1b0-0x1b7 0x220-0x22f 0x300-0x307 0x388-0x38f 0x398-0x39f
[ 5106.140514] cs: IO port probe 0x3e0-0x4ff: clean.
[ 5106.141731] cs: IO port probe 0x820-0x8ff:<6>ts: Compaq touchscreen
protocol output
[ 5106.498585]  clean.
[ 5106.498991] cs: IO port probe 0xc00-0xcf7: clean.
[ 5106.500744] cs: IO port probe 0xa00-0xaff: clean.
[ 5108.745216] orinoco 0.15rc3 (David Gibson
<hermes at gibson.dropbear.id.au>, Pavel Roskin <proski at gnu.org>, et al)
[ 5108.762511] orinoco_cs 0.15rc3 (David Gibson
<hermes at gibson.dropbear.id.au>, Pavel Roskin <proski at gnu.org>, et al)
[ 5108.843958] eth0: Hardware identity 0001:0001:0004:0002
[ 5108.844091] eth0: Station identity  001f:0001:0008:000a
[ 5108.844111] eth0: Firmware determined as Lucent/Agere 8.10
[ 5108.844126] eth0: Ad-hoc demo mode supported
[ 5108.844139] eth0: IEEE standard IBSS ad-hoc mode supported
[ 5108.844152] eth0: WEP supported, 104-bit key
[ 5108.844250] eth0: MAC address 00:02:A5:6F:99:F5
[ 5108.844357] eth0: Station name "HERMES I"
[ 5108.844829] eth0: ready
[ 5108.845190] eth0: index 0x01: Vcc 5.0, irq 3, io 0x0240-0x027f
[ 5108.952733] ieee80211_crypt: registered algorithm 'NULL'
[ 5109.035138] hostap_cs: 0.4.4-kernel (Jouni Malinen <jkmaline at cc.hut.fi>)
[ 5110.958246] lp0: using parport0 (interrupt-driven).
[ 5111.292297] Adding 289128k swap on /dev/hda5.  Priority:-1
extents:1 across:289128k
[ 5111.427098] NET: Registered protocol family 17
[ 5111.645835] EXT3 FS on hda1, internal journal
[ 5112.356265] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 5112.356292] md: bitmap version 4.39
[ 5114.021928] device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
dm-devel at redhat.com
[ 5115.484658] cdrom: open failed.

lshw

*-network
       description: Wireless interface
       physical id: 2
       logical name: eth1
       serial: 00:02:a5:6f:99:f5
       capabilities: ethernet physical wireless
       configuration: broadcast=yes multicast=yes wireless=IEEE 802.11b

does report as conico in another command line

-- 
e-mail baypos at gmail.com

More information about the ubuntu-users mailing list