ieee1394 for kino

[Sebastian Ivan]

Simon Santoro wrote:

> Sebastian Ivan wrote:
>
>>  I have a problem with my ieee1394.
>>  I am running hoary ubuntu Linux and dmesg tells:
>
>
> That's strange. It worked for me almost right out of the box. I had to follow the >instructions on http://ubuntuforums.org/showthread.php?t=2792 to add the >/dev/raw1394 and /dev/video1394 devices, but then kino worked.
> What Camcoder do you have?
>
 good news, my pcmcia ieee1394 is working.
 below are the traces from dmesg:

ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <bcollins at debian.org>
ohci1394: fw-host0: Unexpected PCI resource length of 1000!
ohci1394: fw-host0: SelfID received outside of bus reset sequence
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] 
MMIO=[20800000-208007ff]  Max Packet=[1024]
ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
ieee1394: Node added: ID:BUS[0-00:1023]  GUID[08004601042b2178]
ieee1394: Host added: ID:BUS[0-01:1023]  GUID[00004c0100000264]
ieee1394: raw1394: /dev/raw1394 device initialized

>From Kino Properties window I can see my  camcorder: Sony DCR-PC105E PAL
I try to capture from this device, Kino counts from ten  down and 
stops with  this message
in the status bar:
"No AV/C compliant cam detected or not switched on ?"

I can't capture. Is there a way to enable this AV/C ?
It can't be that Sony is not compliant. 

What am I not doing?

Best Regards