Hoary installed 2X - Laptop Display is too small after installation
Bill Christiansen
bill.christiansen at paradise.net.nz
Mon Mar 14 00:16:29 UTC 2005
It could be similar to my older laptop that only has 2.5 MB video RAM
which is not enough for 1024x768 at 24 bit colour depth so I changed the
default depth to 16 bit and I get full resolution for my LCD display.
You can either run dpkg-reconfigure xserver-xorg or edit
your /etc/X11/xorg.conf
On Sun, 2005-03-13 at 07:52 -0800, Mike Drabik wrote:
> I have installed Hoary 2 times on on my 5 year old
> generic Laptop.
>
> I won't come out of the 800 X 600 display. The video
> card runs only at 64 MHZ.
>
> The Machine itself has a 4.0 GB harddrive running a
> 380 MHZ CPU with 256 MB of RAM. Perhaps the CPU and
> harddrive are upgradable but the RAM amount is all the
> motherboard can handle.
>
> As this is a generic Laptop I don't know the specs on
> the card and don't know how to obtain them in Linux.
> If they are needed to resolve this, my only resolution
> is to install WindowsME and then install a program
> called "Everest" which which will give me the video
> specs in a GUI dispaly.
>
> Anyway . . .
>
> Hoary gives me a very small video display.
>
> The display worked excellently when I installed Warty
> on this Laptop only a few weeks ago.
>
> I noticed, that unlike Warty, Hoary didn't give me the
> chance to choose my video display modes during
> installation.
>
> Consequently when Gnome 2.10 is up and running & I
> checked for video display modes, all I have is 800 X
> 600 available.
>
> I have tried to reset the display using the Laptop's
> CMOS - and no go.
>
> I have searched through Unbuntu's help forums and
> found a suggestion to check /etc/modprobe.d/nvida
>
> I did that 5x (just to make sure I wasn't making a
> typo) -- it doesn't exist on this Laptop.
>
> I found another suggestion to run 'videodev'. I don't
> what that is - a shell file perhaps? If so where I
> find it so I can run it in a Root terminal?
>
> Is it possible to force Warty to get to a boot screen
> that will allow me to add display modes?
>
> And maybe this will help ---
>
> my Warty Xorg.0.log contents.
>
> Here it is:
>
> X Window System Version 6.8.2 (Ubuntu 6.8.2-2
> 20050302131250 root at terranova.warthogs.hbd.com)
> Release Date: 9 February 2005
> X Protocol Version 11, Revision 0, Release 6.8.2
> Build Operating System: Linux 2.6.8.1 i686 [ELF]
> Current Operating System: Linux workgroup 2.6.10-4-386
> #1 Thu Mar 10 03:25:00 GMT 2005 i586
> Build Date: 02 March 2005
> Before reporting problems, check http://wiki.X.Org
> to make sure that you have the latest version.
> Module Loader present
> OS Kernel: Linux version 2.6.10-4-386 (buildd at mcmurdo)
> (gcc version 3.3.5 (Debian 1:3.3.5-8ubuntu2)) #1 Thu
> Mar 10 03:25:00 GMT 2005
> Markers: (--) probed, (**) from config file, (==)
> default setting,
> (++) from command line, (!!) notice, (II)
> informational,
> (WW) warning, (EE) error, (NI) not implemented, (??)I
> also have for the team the contents of
> unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 13
> 09:05:30 2005
> (==) Using config file: "/etc/X11/xorg.conf"
> (==) ServerLayout "Default Layout"
> (**) |-->Screen "Default Screen" (0)
> (**) | |-->Monitor "Generic Monitor"
> (**) | |-->Device "Silicon Motion, Inc. SM710
> LynxEM"
> (**) |-->Input Device "Generic Keyboard"
> (**) Option "XkbRules" "xorg"
> (**) XKB: rules: "xorg"
> (**) Option "XkbModel" "pc104"
> (**) XKB: model: "pc104"
> (**) Option "XkbLayout" "us"
> (**) XKB: layout: "us"
> (==) Keyboard: CustomKeycode disabled
> (**) |-->Input Device "Configured Mouse"
> (**) |-->Input Device "Synaptics Touchpad"
> (WW) The directory "/usr/lib/X11/fonts/cyrillic" does
> not exist.
> Entry deleted from font path.
> (WW) The directory "/usr/lib/X11/fonts/CID" does not
> exist.
> Entry deleted from font path.
> (WW) `fonts.dir' not found (or not valid) in
> "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID".
> Entry deleted from font path.
> (Run 'mkfontdir' on
> "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID").
> (**) FontPath set to
> "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
> (==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> (==) ModulePath set to "/usr/X11R6/lib/modules"
> (WW) Open APM failed (/dev/apm_bios) (No such file or
> directory)
> (II) Module ABI versions:
> X.Org ANSI C Emulation: 0.2
> X.Org Video Driver: 0.7
> X.Org XInput driver : 0.4
> X.Org Server Extension : 0.2
> X.Org Font Renderer : 0.4
> (II) Loader running on linux
> (II) LoadModule: "bitmap"
> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Module bitmap: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> Module class: X.Org Font Renderer
> ABI class: X.Org Font Renderer, version 0.4
> (II) Loading font Bitmap
> (II) LoadModule: "pcidata"
> (II) Loading /usr/X11R6/lib/modules/libpcidata.a
> (II) Module pcidata: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> ABI class: X.Org Video Driver, version 0.7
> (++) using VT number 7
>
> (II) PCI: PCI scan (all values are in hex)
> (II) PCI: 00:00:0: chip 10b9,1541 card 10b9,1541 rev
> 04 class 06,00,00 hdr 00
> (II) PCI: 00:01:0: chip 10b9,5243 card 0000,0000 rev
> 04 class 06,04,00 hdr 01
> (II) PCI: 00:03:0: chip 1217,6832 card 4001,0000 rev
> 34 class 06,07,00 hdr 82
> (II) PCI: 00:03:1: chip 1217,6832 card 4801,0000 rev
> 34 class 06,07,00 hdr 82
> (II) PCI: 00:04:0: chip 127a,2015 card 14c8,2015 rev
> 01 class 07,80,00 hdr 00
> (II) PCI: 00:07:0: chip 10b9,1533 card 10b9,1533 rev
> 0a class 06,01,00 hdr 00
> (II) PCI: 00:0e:0: chip 125d,1969 card 125d,8898 rev
> 02 class 04,01,00 hdr 00
> (II) PCI: 00:0f:0: chip 10b9,5229 card 10b9,5229 rev
> 20 class 01,01,fa hdr 00
> (II) PCI: 00:11:0: chip 10b9,7101 card 10b9,1533 rev
> 09 class 06,80,00 hdr 00
> (II) PCI: 00:13:0: chip 10b9,5237 card 10b9,5237 rev
> 03 class 0c,03,10 hdr 00
> (II) PCI: 01:00:0: chip 126f,0710 card 126f,0710 rev
> a3 class 03,00,00 hdr 00
> (II) PCI: End of PCI scan
> (II) Host-to-PCI bridge:
> (II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL:
> 0x0008 (VGA_EN is set)
> (II) Bus 0 I/O range:
> [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) Bus 0 non-prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 0 prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) PCI-to-PCI bridge:
> (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL:
> 0x000c (VGA_EN is set)
> (II) Bus 1 non-prefetchable memory range:
> [0] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B]
> (II) PCI-to-CardBus bridge:
> (II) Bus 2: bridge is at (0:3:0), (0,2,5), BCTRL:
> 0x0580 (VGA_EN is cleared)
> (II) Bus 2 I/O range:
> [0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
> [1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
> (II) Bus 2 non-prefetchable memory range:
> [0] -1 0 0x10800000 - 0x10bfffff (0x400000) MX[B]
> (II) Bus 2 prefetchable memory range:
> [0] -1 0 0x10400000 - 0x107fffff (0x400000) MX[B]
> (II) PCI-to-CardBus bridge:
> (II) Bus 6: bridge is at (0:3:1), (0,6,9), BCTRL:
> 0x0580 (VGA_EN is cleared)
> (II) Bus 6 I/O range:
> [0] -1 0 0x00004800 - 0x000048ff (0x100) IX[B]
> [1] -1 0 0x00004c00 - 0x00004cff (0x100) IX[B]
> (II) Bus 6 non-prefetchable memory range:
> [0] -1 0 0x11000000 - 0x113fffff (0x400000) MX[B]
> (II) Bus 6 prefetchable memory range:
> [0] -1 0 0x10c00000 - 0x10ffffff (0x400000) MX[B]
> (II) PCI-to-ISA bridge:
> (II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL:
> 0x0008 (VGA_EN is set)
> (--) PCI:*(1:0:0) Silicon Motion, Inc. SM710 LynxEM
> rev 163, Mem @ 0xfd000000/24
> (II) Addressable bus resource ranges are
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) OS-reported resource ranges:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
> MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) PCI Memory resource overlap reduced 0xe0000000
> from 0xe3ffffff to 0xdfffffff
> (II) Active PCI resource ranges:
> [0] -1 0 0xfedef000 - 0xfedeffff (0x1000) MX[B]
> [1] -1 0 0xfedf0000 - 0xfedfffff (0x10000) MX[B]
> [2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
> [3] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
> [4] -1 0 0x0000fc90 - 0x0000fc9f (0x10) IX[B]
> [5] -1 0 0x0000fc7c - 0x0000fc7f (0x4) IX[B]
> [6] -1 0 0x0000fc78 - 0x0000fc7b (0x4) IX[B]
> [7] -1 0 0x0000fcb0 - 0x0000fcbf (0x10) IX[B]
> [8] -1 0 0x0000fca0 - 0x0000fcaf (0x10) IX[B]
> [9] -1 0 0x0000fcc0 - 0x0000fcff (0x40) IX[B]
> [10] -1 0 0x0000fc88 - 0x0000fc8f (0x8) IX[B]
> (II) Active PCI resource ranges after removing
> overlaps:
> [0] -1 0 0xfedef000 - 0xfedeffff (0x1000) MX[B]
> [1] -1 0 0xfedf0000 - 0xfedfffff (0x10000) MX[B]
> [2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
> [3] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
> [4] -1 0 0x0000fc90 - 0x0000fc9f (0x10) IX[B]
> [5] -1 0 0x0000fc7c - 0x0000fc7f (0x4) IX[B]
> [6] -1 0 0x0000fc78 - 0x0000fc7b (0x4) IX[B]
> [7] -1 0 0x0000fcb0 - 0x0000fcbf (0x10) IX[B]
> [8] -1 0 0x0000fca0 - 0x0000fcaf (0x10) IX[B]
> [9] -1 0 0x0000fcc0 - 0x0000fcff (0x40) IX[B]
> [10] -1 0 0x0000fc88 - 0x0000fc8f (0x8) IX[B]
> (II) OS-reported resource ranges after removing
> overlaps with PCI:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
> MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) All system resource ranges:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
> MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xfedef000 - 0xfedeffff (0x1000) MX[B]
> [6] -1 0 0xfedf0000 - 0xfedfffff (0x10000) MX[B]
> [7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
> [8] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
> [9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [11] -1 0 0x0000fc90 - 0x0000fc9f (0x10) IX[B]
> [12] -1 0 0x0000fc7c - 0x0000fc7f (0x4) IX[B]
> [13] -1 0 0x0000fc78 - 0x0000fc7b (0x4) IX[B]
> [14] -1 0 0x0000fcb0 - 0x0000fcbf (0x10) IX[B]
> [15] -1 0 0x0000fca0 - 0x0000fcaf (0x10) IX[B]
> [16] -1 0 0x0000fcc0 - 0x0000fcff (0x40) IX[B]
> [17] -1 0 0x0000fc88 - 0x0000fc8f (0x8) IX[B]
> (II) LoadModule: "bitmap"
> (II) Reloading
> /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Loading font Bitmap
> (II) LoadModule: "dbe"
> (II) Loading
> /usr/X11R6/lib/modules/extensions/libdbe.a
> (II) Module dbe: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 0.2
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "ddc"
> (II) Loading /usr/X11R6/lib/modules/libddc.a
> (II) Module ddc: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> ABI class: X.Org Video Driver, version 0.7
> (II) LoadModule: "dri"
> (II) Loading
> /usr/X11R6/lib/modules/extensions/libdri.a
> (II) Module dri: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> ABI class: X.Org Server Extension, version 0.2
> (II) Loading sub module "drm"
> (II) LoadModule: "drm"
> (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
> (II) Module drm: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> ABI class: X.Org Server Extension, version 0.2
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "extmod"
> (II) Loading
> /usr/X11R6/lib/modules/extensions/libextmod.a
> (II) Module extmod: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 0.2
> (II) Loading extension SHAPE
> (II) Loading extension MIT-SUNDRY-NONSTANDARD
> (II) Loading extension BIG-REQUESTS
> (II) Loading extension SYNC
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XC-MISC
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-Misc
> (II) Loading extension XFree86-DGA
> (II) Loading extension DPMS
> (II) Loading extension FontCache
> (II) Loading extension TOG-CUP
> (II) Loading extension Extended-Visual-Information
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) Loading extension X-Resource
> (II) LoadModule: "freetype"
> (II) Loading
> /usr/X11R6/lib/modules/fonts/libfreetype.a
> (II) Module freetype: vendor="X.Org Foundation & the
> After X-TT Project"
> compiled for 6.8.2, module version = 2.1.0
> Module class: X.Org Font Renderer
> ABI class: X.Org Font Renderer, version 0.4
> (II) Loading font FreeType
> (II) LoadModule: "glx"
> (II) Loading
> /usr/X11R6/lib/modules/extensions/libglx.a
> (II) Module glx: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> ABI class: X.Org Server Extension, version 0.2
> (II) Loading sub module "GLcore"
> (II) LoadModule: "GLcore"
> (II) Loading
> /usr/X11R6/lib/modules/extensions/libGLcore.a
> Skipping
> "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o":
> No symbols found
> Skipping
> "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o":
> No symbols found
> Skipping
> "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o":
> No symbols found
> (II) Module GLcore: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> ABI class: X.Org Server Extension, version 0.2
> (II) Loading extension GLX
> (II) LoadModule: "int10"
> (II) Loading /usr/X11R6/lib/modules/linux/libint10.a
> (II) Module int10: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> ABI class: X.Org Video Driver, version 0.7
> (II) LoadModule: "record"
> (II) Loading
> /usr/X11R6/lib/modules/extensions/librecord.a
> (II) Module record: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.13.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 0.2
> (II) Loading extension RECORD
> (II) LoadModule: "type1"
> (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
> (II) Module type1: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.2
> Module class: X.Org Font Renderer
> ABI class: X.Org Font Renderer, version 0.4
> (II) Loading font Type1
> (II) Loading font CID
> (II) LoadModule: "vbe"
> (II) Loading /usr/X11R6/lib/modules/libvbe.a
> (II) Module vbe: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.1.0
> ABI class: X.Org Video Driver, version 0.7
> (II) LoadModule: "siliconmotion"
> (II) Loading
> /usr/X11R6/lib/modules/drivers/siliconmotion_drv.o
> (II) Module siliconmotion: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.3.1
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 0.7
> (II) LoadModule: "keyboard"
> (II) Loading
> /usr/X11R6/lib/modules/input/keyboard_drv.o
> (II) Module keyboard: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 0.4
> (II) LoadModule: "mouse"
> (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> (II) Module mouse: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 0.4
> (II) LoadModule: "synaptics"
> (II) Loading
> /usr/X11R6/lib/modules/input/synaptics_drv.o
> (II) Module synaptics: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> Module class: XFree86 XInput Driver
> ABI class: XFree86 XInput driver, version 0.3
> (II) Silicon Motion: driver (version 1.3.1) for
> Silicon Motion Lynx chipsets:
> Lynx, LynxE, Lynx3D, LynxEM, LynxEM+, Lynx3DM,
> Cougar3DR
> (II) Primary Device is: PCI 01:00:0
> (--) Chipset LynxEM found
> (II) resource ranges after xf86ClaimFixedResources()
> call:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
> MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xfedef000 - 0xfedeffff (0x1000) MX[B]
> [6] -1 0 0xfedf0000 - 0xfedfffff (0x10000) MX[B]
> [7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
> [8] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
> [9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [11] -1 0 0x0000fc90 - 0x0000fc9f (0x10) IX[B]
> [12] -1 0 0x0000fc7c - 0x0000fc7f (0x4) IX[B]
> [13] -1 0 0x0000fc78 - 0x0000fc7b (0x4) IX[B]
> [14] -1 0 0x0000fcb0 - 0x0000fcbf (0x10) IX[B]
> [15] -1 0 0x0000fca0 - 0x0000fcaf (0x10) IX[B]
> [16] -1 0 0x0000fcc0 - 0x0000fcff (0x40) IX[B]
> [17] -1 0 0x0000fc88 - 0x0000fc8f (0x8) IX[B]
> (II) resource ranges after probing:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
> MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xfedef000 - 0xfedeffff (0x1000) MX[B]
> [6] -1 0 0xfedf0000 - 0xfedfffff (0x10000) MX[B]
> [7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
> [8] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
> [9] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> [10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [11] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [14] -1 0 0x0000fc90 - 0x0000fc9f (0x10) IX[B]
> [15] -1 0 0x0000fc7c - 0x0000fc7f (0x4) IX[B]
> [16] -1 0 0x0000fc78 - 0x0000fc7b (0x4) IX[B]
> [17] -1 0 0x0000fcb0 - 0x0000fcbf (0x10) IX[B]
> [18] -1 0 0x0000fca0 - 0x0000fcaf (0x10) IX[B]
> [19] -1 0 0x0000fcc0 - 0x0000fcff (0x40) IX[B]
> [20] -1 0 0x0000fc88 - 0x0000fc8f (0x8) IX[B]
> [21] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [22] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
> (II) Setting vga for screen 0.
> (II) Loading sub module "vgahw"
> (II) LoadModule: "vgahw"
> (II) Loading /usr/X11R6/lib/modules/libvgahw.a
> (II) Module vgahw: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 0.1.0
> ABI class: X.Org Video Driver, version 0.7
> (**) Silicon MotionDepth 24, (--) framebuffer bpp 24
> (==) Silicon MotionRGB weight 888
> (==) Silicon MotionDefault visual is TrueColor
> (==) Silicon MotionUsing Hardware Cursor
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
> (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
> (II) Silicon MotionPrimary V_BIOS segment is: 0xc000
> (II) Loading sub module "vbe"
> (II) LoadModule: "vbe"
> (II) Reloading /usr/X11R6/lib/modules/libvbe.a
> (II) Silicon MotionVESA BIOS detected
> (II) Silicon MotionVESA VBE Version 2.0
> (II) Silicon MotionVESA VBE Total Mem: 1664 kB
> (II) Silicon MotionVESA VBE OEM: Silicon Motion SM710
> VGA BIOS
> (II) Silicon MotionVESA VBE OEM Software Rev: 2.0
> (II) Silicon MotionVESA VBE OEM Vendor: SM710
> (II) Silicon MotionVESA VBE OEM Product: SM710
> (II) Silicon MotionVESA VBE OEM Product Rev:
> (--) Silicon MotionChipset: "LynxEM"
> (II) Silicon MotionCursor Offset: FFFFFC00 Reserved:
> 001AF800
> (II) Silicon MotionDSTN Panel Size = 800x600
> (II) Silicon MotionvgaHWGetIOBase: hwp->IOBase is
> 0x03d0, hwp->PIOOffset is 0x0000
> (II) Loading sub module "i2c"
> (II) LoadModule: "i2c"
> (II) Loading /usr/X11R6/lib/modules/libi2c.a
> (II) Module i2c: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.2.0
> ABI class: X.Org Video Driver, version 0.7
> (II) Silicon MotionI2C bus "I2C bus" initialized.
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Reloading /usr/X11R6/lib/modules/libddc.a
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Reloading /usr/X11R6/lib/modules/libddc.a
> (II) Silicon MotionVESA VBE DDC supported
> (II) Silicon MotionVESA VBE DDC Level none
> (II) Silicon MotionVESA VBE DDC transfer in appr. 0
> sec.
> (II) Silicon MotionVESA VBE DDC read successfully
> (==) Silicon MotionUsing gamma correction (1.0, 1.0,
> 1.0)
> (--) Silicon Motionvideoram: 2048kB
> (--) Silicon MotionDetected current MCLK value of
> 85.909 MHz
> (II) Silicon MotionGeneric Monitor: Using default
> hsync range of 28.00-33.00 kHz
> (II) Silicon MotionGeneric Monitor: Using default
> vrefresh range of 43.00-72.00 Hz
> (II) Silicon MotionClock range: 20.00 to 135.00 MHz
> (II) Silicon MotionMode: 640x350 24-bpp, 85.079948Hz
> (II) Silicon MotionNot using default mode "640x350"
> (hsync out of range)
> (II) Silicon MotionNot using default mode "320x175"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionMode: 640x400 24-bpp, 85.079948Hz
> (II) Silicon MotionNot using default mode "640x400"
> (hsync out of range)
> (II) Silicon MotionNot using default mode "320x200"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionMode: 720x400 24-bpp, 85.038902Hz
> (II) Silicon MotionNot using default mode "720x400"
> (hsync out of range)
> (II) Silicon MotionNot using default mode "360x200"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionMode: 640x480 24-bpp, 60.000000Hz
> (II) Silicon MotionNot using default mode "320x240"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionMode: 640x480 24-bpp, 72.808800Hz
> (II) Silicon MotionNot using default mode "640x480"
> (hsync out of range)
> (II) Silicon MotionNot using default mode "320x240"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionMode: 640x480 24-bpp, 75.000000Hz
> (II) Silicon MotionNot using default mode "640x480"
> (hsync out of range)
> (II) Silicon MotionNot using default mode "320x240"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionMode: 640x480 24-bpp, 85.008308Hz
> (II) Silicon MotionNot using default mode "640x480"
> (hsync out of range)
> (II) Silicon MotionNot using default mode "320x240"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionMode: 800x600 24-bpp, 56.250000Hz
> (II) Silicon MotionNot using default mode "800x600"
> (hsync out of range)
> (II) Silicon MotionNot using default mode "400x300"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionMode: 800x600 24-bpp, 60.316540Hz
> (II) Silicon MotionNot using default mode "800x600"
> (hsync out of range)
> (II) Silicon MotionNot using default mode "400x300"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionMode: 800x600 24-bpp, 72.187569Hz
> (II) Silicon MotionNot using default mode "800x600"
> (hsync out of range)
> (II) Silicon MotionNot using default mode "400x300"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionMode: 800x600 24-bpp, 75.000000Hz
> (II) Silicon MotionNot using default mode "800x600"
> (hsync out of range)
> (II) Silicon MotionNot using default mode "400x300"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionMode: 800x600 24-bpp, 85.136887Hz
> (II) Silicon MotionNot using default mode "800x600"
> (hsync out of range)
> (II) Silicon MotionNot using default mode "400x300"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1024x768"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "512x384"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1024x768"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "512x384"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1024x768"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "512x384"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1024x768"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "512x384"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1024x768"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "512x384"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1152x864"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "576x432"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1280x960"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "640x480"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1280x960"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "640x480"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1280x1024"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "640x512"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1280x1024"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "640x512"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1280x1024"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "640x512"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1600x1200"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "800x600"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1600x1200"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "800x600"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1600x1200"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "800x600"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1600x1200"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "800x600"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1600x1200"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "800x600"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1792x1344"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "896x672"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1792x1344"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "896x672"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1856x1392"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "928x696"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1856x1392"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "928x696"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1920x1440"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "960x720"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1920x1440"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "960x720"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionMode: 832x624 24-bpp, 74.551270Hz
> (II) Silicon MotionNot using default mode "832x624"
> (exceeds panel dimensions)
> (II) Silicon MotionNot using default mode "416x312"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1152x768"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "576x384"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1152x864"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "576x432"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1400x1050"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "700x525"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1400x1050"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "700x525"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1400x1050"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "700x525"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1400x1050"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "700x525"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1440x900"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "720x450"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1600x1024"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "800x512"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1920x1200"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "960x600"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "1920x1440"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "960x720"
> (bad mode clock/interlace/doublescan)
> (II) Silicon MotionNot using default mode "2048x1536"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "1024x768"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "2048x1536"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "1024x768"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "2048x1536"
> (insufficient memory for mode)
> (II) Silicon MotionNot using default mode "1024x768"
> (insufficient memory for mode)
> (II) Silicon MotionNot using mode "800x600" (no mode
> of this name)
> (II) Silicon MotionMode: 640x480 24-bpp, 60.000000Hz
> (--) Silicon MotionVirtual size is 640x480 (pitch 640)
> (**) Silicon Motion Default mode "640x480": 25.2 MHz,
> 31.5 kHz, 60.0 Hz
> (II) Silicon MotionModeline "640x480" 25.20 640 656
> 752 800 480 490 492 525 -hsync -vsync
> (==) Silicon MotionDPI set to (75, 75)
> (II) Loading sub module "fb"
> (II) LoadModule: "fb"
> (II) Loading /usr/X11R6/lib/modules/libfb.a
> Skipping "/usr/X11R6/lib/modules/libfb.a:fbmmx.o": No
> symbols found
> (II) Module fb: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.0.0
> ABI class: X.Org ANSI C Emulation, version 0.2
> (II) Loading sub module "xaa"
> (II) LoadModule: "xaa"
> (II) Loading /usr/X11R6/lib/modules/libxaa.a
> (II) Module xaa: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 1.2.0
> ABI class: X.Org Video Driver, version 0.7
> (II) Loading sub module "ramdac"
> (II) LoadModule: "ramdac"
> (II) Loading /usr/X11R6/lib/modules/libramdac.a
> (II) Module ramdac: vendor="X.Org Foundation"
> compiled for 6.8.2, module version = 0.1.0
> ABI class: X.Org Video Driver, version 0.7
> (--) Depth 24 pixmap format is 24 bpp
> (II) do I need RAC? No, I don't.
> (II) resource ranges after preInit:
> [0] 0 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B]
> [1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
> MX[B]E(B)
> [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [6] -1 0 0xfedef000 - 0xfedeffff (0x1000) MX[B]
> [7] -1 0 0xfedf0000 - 0xfedfffff (0x10000) MX[B]
> [8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
> [9] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
> [10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> [11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [15] -1 0 0x0000fc90 - 0x0000fc9f (0x10) IX[B]
> [16] -1 0 0x0000fc7c - 0x0000fc7f (0x4) IX[B]
> [17] -1 0 0x0000fc78 - 0x0000fc7b (0x4) IX[B]
> [18] -1 0 0x0000fcb0 - 0x0000fcbf (0x10) IX[B]
> [19] -1 0 0x0000fca0 - 0x0000fcaf (0x10) IX[B]
> [20] -1 0 0x0000fcc0 - 0x0000fcff (0x40) IX[B]
> [21] -1 0 0x0000fc88 - 0x0000fc8f (0x8) IX[B]
> [22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
> (==) Silicon MotionWrite-combining range
> (0xfd000000,0x200000)
> (II) Silicon MotionCursor Offset: 001FFC00 Reserved:
> 001AF800
> (II) Silicon MotionDSTN Panel Size = 800x600
> (II) Silicon MotionvgaHWGetIOBase: hwp->IOBase is
> 0x03d0, hwp->PIOOffset is 0x0000
> (II) Silicon MotionPrimary V_BIOS segment is: 0xc000
> (II) Silicon MotionCurrent mode 0x03.
> (II) Silicon MotionSetting mode 0x53
> (II) Silicon MotionFrameBuffer Box: 0,0 - 640,920
> (II) Silicon MotionUsing XFree86 Acceleration
> Architecture (XAA)
> Screen to screen bit blits
> Solid filled rectangles
> 8x8 mono pattern filled rectangles
> 8x8 color pattern filled rectangles
> CPU to Screen color expansion
> Solid Horizontal and Vertical Lines
> Offscreen Pixmaps
> Setting up tile and stipple cache:
> 15 128x128 slots
> 32 8x8 color pattern slots
> (**) Option "dpms"
> (**) Silicon MotionDPMS enabled
> (II) Silicon MotionI2C device "I2C bus:SAA 7111A"
> registered at address 0x48.
> (II) Silicon MotionI2C device "I2C bus:SAA 7111A"
> removed.
> (==) RandR enabled
> (II) Setting vga for screen 0.
> (II) Initializing built-in extension MIT-SHM
> (II) Initializing built-in extension XInputExtension
> (II) Initializing built-in extension XTEST
> (II) Initializing built-in extension XKEYBOARD
> (II) Initializing built-in extension LBX
> (II) Initializing built-in extension XC-APPGROUP
> (II) Initializing built-in extension SECURITY
> (II) Initializing built-in extension XINERAMA
> (II) Initializing built-in extension XFIXES
> (II) Initializing built-in extension XFree86-Bigfont
> (II) Initializing built-in extension RENDER
> (II) Initializing built-in extension RANDR
> (II) Initializing built-in extension COMPOSITE
> (II) Initializing built-in extension DAMAGE
> (II) Initializing built-in extension XEVIE
> (**) Generic Keyboard: Core Keyboard
> (**) Option "Protocol" "standard"
> (**) Generic Keyboard: Protocol: standard
> (**) Option "AutoRepeat" "500 30"
> (**) Option "XkbRules" "xorg"
> (**) Generic Keyboard: XkbRules: "xorg"
> (**) Option "XkbModel" "pc104"
> (**) Generic Keyboard: XkbModel: "pc104"
> (**) Option "XkbLayout" "us"
> (**) Generic Keyboard: XkbLayout: "us"
> (**) Option "CustomKeycodes" "off"
> (**) Generic Keyboard: CustomKeycodes disabled
> (**) Option "Protocol" "ImPS/2"
> (**) Configured Mouse: Device: "/dev/input/mice"
> (**) Configured Mouse: Protocol: "ImPS/2"
> (**) Option "CorePointer"
> (**) Configured Mouse: Core Pointer
> (**) Option "Device" "/dev/input/mice"
> (**) Option "Emulate3Buttons" "true"
> (**) Configured Mouse: Emulate3Buttons,
> Emulate3Timeout: 50
> (**) Option "ZAxisMapping" "4 5"
> (**) Configured Mouse: ZAxisMapping: buttons 4 and 5
> (**) Configured Mouse: Buttons: 5
> (II) Synaptics touchpad driver version 0.13.6
> (--) Synaptics Touchpad auto-dev sets device to
> /dev/input/event1
> (**) Option "Device" "/dev/input/event1"
> (**) Option "HorizScrollDelta" "0"
> (--) Synaptics Touchpad synaptics touchpad found
> (**) Option "SendCoreEvents" "true"
> (**) Synaptics Touchpad: always reports core events
> (II) XINPUT: Adding extended input device "Synaptics
> Touchpad" (type: MOUSE)
> (II) XINPUT: Adding extended input device "Configured
> Mouse" (type: MOUSE)
> (II) XINPUT: Adding extended input device "Generic
> Keyboard" (type: KEYBOARD)
> Synaptics DeviceInit called
> SynapticsCtrl called.
> (II) Configured Mouse: ps2EnableDataReporting:
> succeeded
> Synaptics DeviceOn called
> (--) Synaptics Touchpad synaptics touchpad found
> Warning: font renderer for ".pcf" already registered
> at priority 0
> Warning: font renderer for ".pcf.Z" already registered
> at priority 0
> Warning: font renderer for ".pcf.gz" already
> registered at priority 0
> Warning: font renderer for ".snf" already registered
> at priority 0
> Warning: font renderer for ".snf.Z" already registered
> at priority 0
> Warning: font renderer for ".snf.gz" already
> registered at priority 0
> Warning: font renderer for ".bdf" already registered
> at priority 0
> Warning: font renderer for ".bdf.Z" already registered
> at priority 0
> Warning: font renderer for ".bdf.gz" already
> registered at priority 0
> Warning: font renderer for ".pmf" already registered
> at priority 0
> Could not init font path element unix/:7100, removing
> from list!
>
> ----
>
> I do note that there that a lot of the modes were
> marked 'insufficient memory for mode'.
>
> Now, I really don't want hear "Sorry, Pal, you're out
> of luck. 'Fraid Warty Ubunutu ain't gonna run right on
> your laptop. Try another Distro."
>
> Well, I don't want to. I want to use Ubuntu.
>
> So, if video memory is an issue, maybe Gnome 2.10
> isn't ever going to work properly on this ancient
> Laptop. So, I would suggest to the development team
> that it should really give Ubuntu users the option
> during installation of selecting another Windows
> Manager such as Fluxbox or Icewm: these ran quite well
> for me under Knoppix (which would not, by the way,
> load KDE due to video memory issues). I don't want to
> use a Live-CD on this Laptop and the Knoppix team
> doesn't give access to Root so that it can be
> installed to harddrive. What I do I want is for the
> O/S and the Windows Manager to run from the hardrive
> with video in the fullest display possible (i.e more
> that 800 x 600). Ubuntu is the best choice and has the
> best potential of all the Distros I seen (and used)
> for using Linux on ANY computer.
>
> So, any help that can be given will be appreciated.
>
> Thanks!
> Mike
>
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Small Business - Try our new resources site!
> http://smallbusiness.yahoo.com/resources/
>
More information about the ubuntu-users
mailing list