glx prpblems

ZIYAD A. M. AL-BATLY zamb at spymac.com
Sun Mar 13 02:46:42 UTC 2005 

On Sun, 2005-03-13 at 01:18 +0000, baza wrote:
> This held up for moderation on the list, so here is my xorg.0.log
> 
> 
> 
> That didn't fix it, so here's my full Xorg.0.log.....
> 
> 
> 
> X Window System Version 6.8.2 (Ubuntu 6.8.2-2 20050302131250 
> root at terranova.warthogs.hbd.com)
> Release Date: 9 February 2005
> X Protocol Version 11, Revision 0, Release 6.8.2
> Build Operating System: Linux 2.6.8.1 i686 [ELF]
> Current Operating System: Linux barbelith 2.6.10-4-686 #1 Sat Mar 12 
> 11:12:34 GMT 2005 i686
> Build Date: 02 March 2005
>    Before reporting problems, check http://wiki.X.Org
>    to make sure that you have the latest version.
> Module Loader present
> OS Kernel: Linux version 2.6.10-4-686 (buildd at mcmurdo) (gcc version 
> 3.3.5 (Debian 1:3.3.5-8ubuntu2)) #1 Sat Mar 12 11:12:34 GMT 2005
> Markers: (--) probed, (**) from config file, (==) default setting,
>    (++) from command line, (!!) notice, (II) informational,
>    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 13 00:44:37 2005
> (==) Using config file: "/etc/X11/xorg.conf"
> (==) ServerLayout "Simple Layout"
> (**) |-->Screen "Screen 1" (0)
> (**) |   |-->Monitor "My Monitor"
> (**) |   |-->Device "** Intel i810 (generic)               [i810]"
> (**) |-->Input Device "Mouse1"
> (**) |-->Input Device "Keyboard1"
> ...
> ...
> ...
> (II) I810(0): Primary V_BIOS segment is: 0xc000
> (II) I810(0): VESA BIOS detected
> (II) I810(0): VESA VBE Version 3.0
> (II) I810(0): VESA VBE Total Mem: 832 kB
> (II) I810(0): VESA VBE OEM: Intel(r)845G/845GL/845GE/845GV Graphics
> Chip Accelerated VGA BIOS
> (II) I810(0): VESA VBE OEM Software Rev: 1.0
> (II) I810(0): VESA VBE OEM Vendor: Intel Corporation
> (II) I810(0): VESA VBE OEM Product: Intel(r)845G/845GL/845GE/845GV
> Graphics Controller
> (II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
> (==) I810(0): Default visual is TrueColor
> (II) I810(0): Allocated 128 kB for the ring buffer at 0x0
> (II) I810(0): Allocating at least 256 scanlines for pixmap cache
> (II) I810(0): Initial framebuffer allocation size: 10240 kByte
> (II) I810(0): Allocated 4 kB for HW cursor at 0x7fff000
> (II) I810(0): Allocated 16 kB for HW (ARGB) cursor at 0x7ffb000
> (II) I810(0): Allocated 4 kB for Overlay registers at 0x7ffa000
> (0x17e7e000).
> (II) I810(0): Allocated 64 kB for the scratch buffer at 0x7fea000
> (II) I810(0): Updated framebuffer allocation size from 10240 to 16384
> kByte
> (II) I810(0): Updated pixmap cache from 256 scanlines to 1024
> scanlines
> (II) I810(0): 0x83d2f40: Memory at offset 0x00020000, size 16384
> kBytes
> (II) I810(0): 0x835df98: Memory at offset 0x07fff000, size 4 kBytes
> (II) I810(0): 0x8362378: Memory at offset 0x07ffb000, size 16 kBytes
> (II) I810(0): 0x836154c: Memory at offset 0x00000000, size 128 kBytes
> (II) I810(0): 0x83d2f80: Memory at offset 0x07fea000, size 64 kBytes
> (II) I810(0): 0x83623a0: Memory at offset 0x07ffa000, size 4 kBytes
> (==) I810(0): Write-combining range (0xf0000000,0x8000000)
> (II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset
> is 
> 0x0000
> (II) I810(0): xf86BindGARTMemory: bind key 4 at 0x000df000 (pgoffset
> 223)
> (II) I810(0): xf86BindGARTMemory: bind key 0 at 0x07fff000 (pgoffset
> 32767)
> (II) I810(0): xf86BindGARTMemory: bind key 1 at 0x07ffb000 (pgoffset
> 32763)
> (II) I810(0): xf86BindGARTMemory: bind key 3 at 0x07fea000 (pgoffset
> 32746)
> (II) I810(0): xf86BindGARTMemory: bind key 2 at 0x07ffa000 (pgoffset
> 32762)
> (WW) I810(0): PGTBL_ER is 0x00000049
> (WW) I810(0): Extended BIOS function 0x5f05 not supported.
> (II) I810(0): BIOS call 0x5f05 not supported, setting refresh with VBE
> 3 method.
> (II) I810(0): Display plane A is enabled and connected to Pipe A.
> (II) I810(0): Enabling plane A.
> (II) I810(0): Display plane A is now enabled and connected to Pipe A.
> (II) I810(0): PIPEACONF is 0x80000000
> (II) I810(0): Mode bandwidth is 78 Mpixel/s
> (WW) I810(0): Extended BIOS function 0x5f28 not supported.
> (WW) I810(0): Extended BIOS function 0x5f61 not supported.
> (II) I810(0): Using XFree86 Acceleration Architecture (XAA)
>    Screen to screen bit blits
>    Solid filled rectangles
>    8x8 mono pattern filled rectangles
>    Indirect CPU to Screen color expansion
>    Solid Horizontal and Vertical Lines
>    Offscreen Pixmaps
>    Setting up tile and stipple cache:
>        32 128x128 slots
>        16 256x256 slots
>        5 512x512 slots
> (==) I810(0): Backing store disabled
> (==) I810(0): Silken mouse enabled
> (II) I810(0): Initializing HW Cursor
> (II) I810(0): direct rendering: Failed
> (==) RandR enabled
> Symbol __glXgetActiveScreen from module 
> /usr/X11R6/lib/modules/extensions/libdri.a is unresolved!
> Symbol __glXgetActiveScreen from module 
> /usr/X11R6/lib/modules/extensions/libdri.a is unresolved!
> (II) Initializing built-in extension MIT-SHM
> (II) Initializing built-in extension XInputExtension
> (II) Initializing built-in extension XTEST
> (II) Initializing built-in extension XKEYBOARD
> (II) Initializing built-in extension LBX
> (II) Initializing built-in extension XC-APPGROUP
> (II) Initializing built-in extension SECURITY
> (II) Initializing built-in extension XINERAMA
> (II) Initializing built-in extension XFIXES
> (II) Initializing built-in extension XFree86-Bigfont
> (II) Initializing built-in extension RENDER
> (II) Initializing built-in extension RANDR
> (II) Initializing built-in extension COMPOSITE
> (II) Initializing built-in extension DAMAGE
> (II) Initializing built-in extension XEVIE
> (EE) Failed to initialize GLX extension (NVIDIA X driver not found)
> (**) Option "Protocol" "Auto"
> (**) Mouse1: Device: "/dev/input/mice"
> (**) Mouse1: Protocol: "Auto"
> (**) Option "CorePointer"
> (**) Mouse1: Core Pointer
> (**) Option "Device" "/dev/input/mice"
> (**) Option "Emulate3Buttons"
> (**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
> (**) Option "ZAxisMapping" "4 5"
> (**) Mouse1: ZAxisMapping: buttons 4 and 5
> (**) Mouse1: Buttons: 5
> (**) Option "CoreKeyboard"
> (**) Keyboard1: Core Keyboard
> (**) Option "Protocol" "standard"
> (**) Keyboard1: Protocol: standard
> (**) Option "AutoRepeat" "500 30"
> (**) Option "XkbRules" "xorg"
> (**) Keyboard1: XkbRules: "xorg"
> (**) Option "XkbModel" "pc101"
> (**) Keyboard1: XkbModel: "pc101"
> (**) Option "XkbLayout" "gb"
> (**) Keyboard1: XkbLayout: "gb"
> (**) Option "CustomKeycodes" "off"
> (**) Keyboard1: CustomKeycodes disabled
> (II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
> (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
> (--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
> (II) Mouse1: ps2EnableDataReporting: succeeded
> 

(Sorry about the previous replay, I didn't read the above mail until it
is too late)

Let's start one by one:

      * First, your system complain about
        "/usr/X11R6/lib/modules/extensions/libdri.a", this file comes
        from the package "xserver-xorg", so do please re-install it
        again just to be safe.

      * Second, your X print an error message about GLX and NVIDIA
        driver not found!.  You don't have NVIDIA card (you said it
        yourself, and it's obvious from the above log) so please do
        remove all the following packages (if present):
                nvidia-glx
                nvidia-kernel-common

      * Third (and this one is my fault, sorry), remove
                Load	"GLX"
                Load	"GLcore"
        from "/etc/X11/xorg.conf" section "Modules" (apparently, "GLX"
        is only specific for NVIDIA, "GLcore" is not used any more!, and
        for DRI you only need "dri").


Try it, tell us what you get (and I'm terribly sorry about my mistake).
Ziyad.

More information about the ubuntu-users mailing list