Very slow CD ripping with sound-juicer
Kirtis Bakalarczyk
kirtis.bakalarczyk at gmail.com
Thu Mar 10 03:43:44 UTC 2005
On Wed, 9 Mar 2005 22:31:00 -0500, Matt Galvin <matt.t.galvin at gmail.com> wrote:
> What version of Sound Juicer are you using? The latest one? I just did
> a fresh install from the 20050309.2 daily cd and it works great for me
> :)
It's version 2.10.0. I'm not sure if i downloaded the .1 or .2 CD, it
was a fresh download this afternoon.. plus apt-get update && apt-get
dist-upgrade shows no updates so i'm assuming it's the latest.
Upon closer inspection, i've noticed that it's only my DVD drive that
rips slowly.. my burner rips at the regular speed. (which by the way,
has always been slow, around 2.2 - 2.4x. I'm not sure of the drive
speed but i'm certain it's faster than that..)
I've also tried copying some files off of the install CD, and it runs
normally when copying from a data CD..
Here's the relevant portion from 'lshal'
udi = '/org/freedesktop/Hal/devices/block_22_0'
volume.is_partition = false (bool)
storage.policy.desired_mount_point = 'cdrom' (string)
storage.policy.mount_filesystem = 'auto' (string)
storage.policy.should_mount = true (bool)
info.udi = '/org/freedesktop/Hal/devices/block_22_0' (string)
storage.requires_eject = true (bool)
storage.hotpluggable = false (bool)
storage.cdrom.write_speed = 0 (0x0) (int)
storage.cdrom.read_speed = 8448 (0x2100) (int)
storage.cdrom.support_media_changed = true (bool)
storage.cdrom.dvdplusrw = false (bool)
storage.cdrom.dvdplusr = false (bool)
storage.cdrom.dvdram = false (bool)
storage.cdrom.dvdrw = false (bool)
storage.cdrom.dvdr = false (bool)
storage.cdrom.dvd = true (bool)
storage.cdrom.cdrw = false (bool)
storage.cdrom.cdr = false (bool)
storage.removable = true (bool)
storage.firmware_version = 'GDHF' (string)
info.product = 'LITEON DVD-ROM LTD163' (string)
storage.drive_type = 'cdrom' (string)
block.storage_device = '/org/freedesktop/Hal/devices/block_22_0' (string)
storage.physical_device = '/org/freedesktop/Hal/devices/ide_1_0' (string)
storage.vendor = '' (string)
storage.model = 'LITEON DVD-ROM LTD163' (string)
storage.automount_enabled_hint = true (bool)
storage.no_partitions_hint = true (bool)
storage.media_check_enabled = true (bool)
storage.bus = 'ide' (string)
block.minor = 0 (0x0) (int)
block.major = 22 (0x16) (int)
info.capabilities = 'block storage.cdrom storage' (string)
info.category = 'storage' (string)
info.parent = '/org/freedesktop/Hal/devices/ide_1_0' (string)
block.device = '/dev/hdc' (string)
block.is_volume = false (bool)
block.have_scanned = true (bool)
block.no_partitions = true (bool)
linux.sysfs_path_device = '/sys/block/hdc' (string)
linux.sysfs_path = '/sys/block/hdc' (string)
info.bus = 'block' (string)
HTH,
KIRT
>
> Matt
>
>
> On Wed, 9 Mar 2005 22:21:26 -0500, Kirtis Bakalarczyk
> <kirtis.bakalarczyk at gmail.com> wrote:
> > Heya!
> >
> > I discovered a problem with my new Hoary install..
> >
> > I started ripping a CD in sound juicer and came back an hour later to
> > find that it wasn't finished yet! Turns out it's ripping at 0.7x and
> > it's not even finished yet. I tried stopping it, turning on dma on
> > the drive using hdparm, but that had no effect. fuser /dev/hdc shows
> > that no other process is trying to access the drive and there are no
> > visible scratches on the disc.. I've also tried other CDs, they had
> > the same problem.
> >
> > A little guidance please?
> >
> > KIRT
> >
> > --
> > ubuntu-users mailing list
> > ubuntu-users at lists.ubuntu.com
> > http://lists.ubuntu.com/mailman/listinfo/ubuntu-users
> >
>
More information about the ubuntu-users
mailing list