adding extra drivers on install
Christian Casimir
c.casimir at laposte.net
Fri Oct 1 23:59:14 UTC 2004
Here's what you asked...
Colin Watson a écrit :
> On Fri, Oct 01, 2004 at 03:03:04PM -0700, Matt Zimmerman wrote:
>>Both of those drivers are installed available by default; you should not
>>need to take any action. Please send the output of the following commands:
>>lsmod
Module Size Used by
proc_intf 3968 0
freq_table 4356 0
cpufreq_userspace 5336 0
cpufreq_powersave 2048 0
ipv6 230020 8
ds 17796 4
button 6936 0
battery 9740 0
ac 5132 0
asus_acpi 11800 0
3c59x 36776 0
yenta_socket 19328 0
pcmcia_core 62916 2 ds,yenta_socket
uhci_hcd 29328 0
usbcore 104292 3 uhci_hcd
pci_hotplug 30640 0
intel_agp 20512 1
agpgart 31784 1 intel_agp
pcspkr 3816 0
rtc 12216 0
nls_iso8859_1 4352 1
nls_cp437 6016 1
vfat 13312 1
fat 41792 1 vfat
md 44744 0
dm_mod 51068 1
capability 4872 0
commoncap 7168 1 capability
snd_cs4281 21476 0
snd_rawmidi 23232 1 snd_cs4281
snd_ac97_codec 59268 1 snd_cs4281
snd_pcm_oss 48168 0
snd_mixer_oss 16640 1 snd_pcm_oss
snd_pcm 85540 2 snd_cs4281,snd_pcm_oss
snd_page_alloc 11144 1 snd_pcm
snd_opl3_lib 9728 1 snd_cs4281
snd_seq_device 7944 2 snd_rawmidi,snd_opl3_lib
snd_timer 23172 2 snd_pcm,snd_opl3_lib
snd_hwdep 9120 1 snd_opl3_lib
snd 50660 10
snd_cs4281,snd_rawmidi,snd_ac97_codec,snd_pcm_o
ss,snd_mixer_oss,snd_pcm,snd_opl3_lib,snd_seq_device,snd_timer,snd_hwdep
soundcore 9824 1 snd
gameport 4736 1 snd_cs4281
parport_pc 32064 1
lp 10436 0
tsdev 7168 0
parport 37320 2 parport_pc,lp
evdev 9088 0
ide_cd 38276 0
mousedev 10124 1
psmouse 17800 0
sr_mod 15780 0
cdrom 35872 2 ide_cd,sr_mod
sd_mod 20480 0
scsi_mod 115148 2 sr_mod,sd_mod
ext3 109544 1
jbd 54552 1 ext3
ide_generic 1664 0
piix 12576 1
ide_disk 16768 4
ide_core 125272 4 ide_cd,ide_generic,piix,ide_disk
unix 25904 659
fan 4236 0
thermal 13200 0
processor 17712 1 thermal
font 8576 0
vesafb 6688 0
cfbcopyarea 3968 1 vesafb
cfbimgblt 3200 1 vesafb
cfbfillrect 3712 1 vesafb
>>lspci
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP
bridge (rev 03)
0000:00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
0000:00:08.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
0000:00:08.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
0000:00:0a.0 Ethernet controller: 3Com Corporation 3c556B CardBus
[Tornado] (rev 20)
0000:00:0a.1 Communication controller: 3Com Corporation Mini PCI 56k
Winmodem (rev 20)
0000:00:0b.0 Multimedia audio controller: Cirrus Logic Crystal CS4281
PCI Audio (rev 01)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Rage
Mobility P/M AGP 2x (rev 64)
>>cardctl ident
Socket 0:
no product info available
Socket 1:
no product info available
> We will probably need 'lspci -n'
0000:00:00.0 Class 0600: 8086:7190 (rev 03)
0000:00:01.0 Class 0604: 8086:7191 (rev 03)
0000:00:07.0 Class 0680: 8086:7110 (rev 02)
0000:00:07.1 Class 0101: 8086:7111 (rev 01)
0000:00:07.2 Class 0c03: 8086:7112 (rev 01)
0000:00:07.3 Class 0680: 8086:7113 (rev 03)
0000:00:08.0 Class 0607: 1180:0476 (rev 80)
0000:00:08.1 Class 0607: 1180:0476 (rev 80)
0000:00:0a.0 Class 0200: 10b7:6056 (rev 20)
0000:00:0a.1 Class 0780: 10b7:1007 (rev 20)
0000:00:0b.0 Class 0401: 1013:6005 (rev 01)
0000:01:00.0 Class 0300: 1002:4c4d (rev 64)
and I thought this bonus could be useful...
dmesg :
Linux version 2.6.8.1-3-386 (buildd at macaroni) (gcc version 3.3.4 (Debian
1:3.3.4-9ubuntu5)) #1 Mon Sep 27 10:50:47 UTC 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dd000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
BIOS-e820: 0000000007ff0000 - 0000000007ffec00 (ACPI data)
BIOS-e820: 0000000007ffec00 - 0000000008000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
127MB LOWMEM available.
On node 0 totalpages: 32752
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 28656 pages, LIFO batch:6
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f6ec0
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x07ff5c64
ACPI: FADT (v001 IBM TP-X21 0x06040000 0x00000000) @ 0x07ffeb65
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x07ffebd9
ACPI: DSDT (v001 IBM TP-X21 0x06040000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
Built 1 zonelists
Kernel command line: root=/dev/hda2 ro quiet splash
Local APIC disabled by BIOS -- reenabling.
Could not enable APIC!
Initializing CPU#0
PID hash table entries: 512 (order 9: 4096 bytes)
Detected 597.443 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 122644k/131008k available (1329k kernel code, 7820k reserved,
725k data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1183.74 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
ACPI: IRQ9 SCI: Edge set to Level Trigger.
checking if image is initramfs...it isn't (ungzip failed); looks like an
initrd
Freeing initrd memory: 4112k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 9 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 9 *11)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: Power Resource [PSIO] (on)
ACPI: Power Resource [PSER] (off)
ACPI: Embedded Controller [EC] (gpe 9)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f6f70
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xadbc, dseg 0x400
pnp: 00:00: ioport range 0x15e8-0x15e8 has been reserved
pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0b: ioport range 0x1000-0x103f could not be reserved
pnp: 00:0b: ioport range 0x1040-0x104f has been reserved
PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:08.1[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:0a.1[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
Simple Boot Flag at 0x35 set to 0x1
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch at atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
pnp: Device 00:0f activated.
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S3 S4 S5)
ACPI wakeup devices:
LID SLPB PCI0 USB UART
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4112 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 204k freed
vesafb: probe of vesafb0 failed with error -6
ACPI: Processor [CPU] (supports C1 C2 C3, 8 throttling states)
ACPI: Thermal Zone [THM0] (54 C)
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:pio, hdd:pio
hda: IC25N020ATCS04-0, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 39070080 sectors (20003 MB) w/1768KiB Cache, CHS=41344/15/63, UDMA(33)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 >
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Adding 683664k swap on /dev/hda5. Priority:-1 extents:1
EXT3 FS on hda2, internal journal
SCSI subsystem initialized
input: PS/2 Generic Mouse on isa0060/serio1
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
parport: PnPBIOS parport detected.
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 11 (level, low) -> IRQ 11
DLLRDY not seen
CS4281: probe of 0000:00:0b.0 failed with error -5
Capability LSM initialized
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm at uk.sistina.com
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Real Time Clock Driver v1.12
input: PC Speaker
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: Maximum main memory to use for agp memory: 94M
agpgart: AGP aperture is 64M @ 0xf8000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 USB
uhci_hcd 0000:00:07.2: irq 11, io base 00001820
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:08.0 [1014:0185]
Yenta: ISA IRQ mask 0x0438, PCI irq 11
Socket status: 30000006
ACPI: PCI interrupt 0000:00:08.1[B] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:08.1 [1014:0185]
Yenta: ISA IRQ mask 0x0438, PCI irq 11
Socket status: 30000006
PCI: Enabling device 0000:00:0a.0 (0000 -> 0003)
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:0a.0: 3Com PCI 3c556B Laptop Hurricane at 0x1400. Vers LK1.1.19
PCI: Setting latency timer of device 0000:00:0a.0 to 64
***WARNING*** No MII transceivers found!
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x377
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02c9d00(lo)
IPv6 over IPv4 tunneling driver
Thanks again for your help !
Christian C.
More information about the ubuntu-users
mailing list